From cb95af864bd517871a1310aa52d9769529c5a398 Mon Sep 17 00:00:00 2001
From: rusefillc <48498823+rusefillc@users.noreply.github.com>
Date: Thu, 30 Nov 2023 14:46:17 -0500
Subject: [PATCH] Updated uaEFI (markdown)

---
 uaEFI.md | 26 ++++++--------------------
 1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/uaEFI.md b/uaEFI.md
index f69a2d37..f70dc0f8 100644
--- a/uaEFI.md
+++ b/uaEFI.md
@@ -8,29 +8,15 @@ https://github.com/rusefi/uaefi
  * sequential six smart coils with option of on-board igniters
  * sequential six injector outputs
  * two VRs: one MAX9924 one vr-discrete, both with solder-blob jumper to modify into hall input
+ * two hall inputs
  * dual DC motor to drive ETB/wastegate or stepper idle
  * on-board 4.9 LSU WBO controller
  * four above 1A current low side outputs
  * a couple of lower current low side outputs
  * Flex fuel input
-
-
- 
-
-* 100x100cm or less PCB if possible
- * mm100-f4
-
- * two hall inputs
- * flex digital input https://github.com/rusefi/uaefi/issues/5
- * one knock input
- * smaller battery holder
- * both on-board MAP sensor footprints
- * analog inputs https://github.com/rusefi/uaefi/issues/4
- * tripled option USB: 1x5 header, vertical mini and flat USB-C
- * molex 2 row angle connectors with 4.2mm pitch
- * two power GND pins
- * four analog GND pins
- * four +5v sensor power pins
- * one EGT chip MAX31855 see https://github.com/rusefi/rusefi-hardware/tree/main/lambda-x2
+ * knock sensor input
+ * on-board real time clock battery
+ * on-board MAP sensor footprints
+ * on-board EGT input
  * proto area
- * 3-4 mounting holes
\ No newline at end of file
+ * 100x100mm 4 layer PCB
\ No newline at end of file