fix links
This commit is contained in:
David Holdeman
parent
489103d390
commit
cbf71dd383
|
|
@ -8,4 +8,4 @@ v0.1/v0.2 power supply check list
|
|||
1. 5v test pad: expected 5.0v
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -32,7 +32,7 @@ For component placement please use interactive BOM
|
|||
[0.4.7](https://rusefi.com/docs/ibom/microRusEfi_R0.4.7.html)
|
||||
|
||||
|
||||
[Some checkpoints](Hardware/microrusefi/Hardware_microRusEFI_0_4_7_front_checks.jpg)
|
||||
[Some checkpoints](Hardware/microRusEFI/Hardware_microRusEFI_0_4_7_front_checks.jpg)
|
||||
|
||||
|
||||
All microRusEfi kits use [MRE F4 rusEFI firmware - DOWNLOAD LATEST BUNDLE HERE](https://rusefi.com/build_server/rusefi_bundle_mre_f4.zip)
|
||||
|
|
@ -62,10 +62,10 @@ Depending on your crankshaft position sensor type you would need to populate eit
|
|||
0.4.8: Comes set for VR (R9 & C12 are now on the front since)
|
||||
|
||||
VR mode front - comes pre-assembled
|
||||
|
||||
|
||||
|
||||
VR mode back
|
||||
|
||||
|
||||
|
||||
|
||||
0.4.5, 0.4.7: For Hall, you would need to REMOVE R15 & C35 on the front, and install R17=1.5K R18=R19=4.7K on the back.
|
||||
|
|
@ -73,36 +73,36 @@ VR mode back
|
|||
0.4.8: For Hall, you would need to REMOVE R15&R9, C12 & C35 on the front, and install R17=1.5K R18=R19=4.7K on the back.
|
||||
|
||||
0.5.0 Hall
|
||||
|
||||
|
||||
|
||||
0.4.7 Hall mode front
|
||||
|
||||
|
||||
|
||||
0.4.7 Hall mode back
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# Board Photos
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Kit front:
|
||||
|
||||
|
||||
|
||||
|
||||
Kit parts on the front:
|
||||
|
||||
|
||||
|
||||
|
||||
Kit parts on the back:
|
||||
|
||||
|
||||
|
||||
Flyback diodes orientation
|
||||
|
||||
|
||||
|
||||
|
||||
# Important details
|
||||
|
|
@ -127,7 +127,7 @@ J7 header in bottom-left corner of microRusEFI allows direct SWD programming usi
|
|||
|
||||
Tag Connect In circuit Cable "NO Legs" Version
|
||||
|
||||
|
||||
|
||||
|
||||
### Note - Missing wire caps
|
||||
In the even of a missing wire cap on the molex plug the correct part number is 64320-1301 and these can be easily sourced online
|
||||
|
|
|
|||
|
|
@ -2,15 +2,15 @@
|
|||
|
||||
[Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Rear side of PCB
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
In some cases without "main relay output +12v" both pins #1 and #5 should be connected to the single source of +12v.
|
||||
|
||||
|
|
@ -91,8 +91,8 @@ R12=10K
|
|||
R13=0R
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -102,7 +102,7 @@ microRusEFI exposes the following pins in addition to the primary 48 pin connect
|
|||
|
||||
J4:
|
||||
|
||||
|
||||
|
||||
| N | Name | Possible functions (not all listed!) |
|
||||
|----|-------------| ---- |
|
||||
| 9 | GNS | GND
|
||||
|
|
@ -131,7 +131,7 @@ Three GPIOs are available on J2 (SWD) connector. If you are not going to use deb
|
|||
|
||||
For HW version 0.5.0 and newer some additional GPIOs are available on testpoints around STM32.
|
||||
|
||||
|
||||
|
||||
|
||||
[Testpoint Interactive Pinout](https://rusefi.com/docs/pinouts/microrusefi/pads.html)
|
||||
|
||||
|
|
|
|||
|
|
@ -6,13 +6,13 @@ US: 2007+ Nissan Altima & 2007+ Nissan Sentra
|
|||
Harness side socket.
|
||||
"Removable front key" style.
|
||||
Left from China, Right removed from Nissan Sentra.
|
||||
|
||||
|
||||
|
||||
|
||||
Removed from Nissan Sentra - square terminals.
|
||||
Left large terminal. Right small pin terminal.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
PCB side: [Molex 48 pin PCB plug](https://www.mouser.com/datasheet/2/276/5007620481_PCB_HEADERS-179151.pdf) 5007620481 500762-0481
|
||||
|
|
@ -37,7 +37,7 @@ todo
|
|||
|
||||
|
||||
"Side clip" style harness socket, both from China.
|
||||
|
||||
|
||||
|
||||
|
||||
Terminals
|
||||
|
|
@ -54,7 +54,7 @@ With a utility knife you need to cut 4 keys from inside the male part to mate de
|
|||
as is.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
|
@ -193,7 +193,7 @@ JP44 USB GND| Y| N| *| Press. Reg. vlv
|
|||
JP50 2X CAN_L| Y |N| Purg Sol. Vlv| Purg Sol. Vlv
|
||||
|
||||
|
||||
[Schematics 0.4](Hardware/pnp_microRusEFI_48na/microrusefi48adapter_0.4.pdf)
|
||||
[Schematics 0.4](Hardware/pnp_microRusEFI_48na/microRusEFI48adapter_0.4.pdf)
|
||||
|
||||
[Schematics 0.2](https://github.com/rusefi/rusefi_documentation/raw/master/Hardware/pnp_microRusEfi_48na/microrusefi48adapter_0_2.pdf)
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue