convert some links using script, and fix some manually
This commit is contained in:
parent
8ab655abdd
commit
d2e42e395b
|
@ -1,4 +1,4 @@
|
||||||
https://rusefi.com//wiki/index.php?title=Hardware:Shock_Dyno
|
[Shock Dyno](Shock-Dyno)
|
||||||
|
|
||||||
https://arstechnica.com/cars/2015/07/the-future-of-car-suspension-is-here-dsc-sports-active-shocks-in-action/
|
https://arstechnica.com/cars/2015/07/the-future-of-car-suspension-is-here-dsc-sports-active-shocks-in-action/
|
||||||
"Normally, a car's weight transfers from front to back as it brakes and accelerates, and from side to side as it corners. As the force on each corner changes, so does the grip available to that wheel; less weight equals less grip. Active shocks control this by varying the degree to which each spring's compresses and extends (as the springs are passive, these systems are sometimes known as semi-active)."
|
"Normally, a car's weight transfers from front to back as it brakes and accelerates, and from side to side as it corners. As the force on each corner changes, so does the grip available to that wheel; less weight equals less grip. Active shocks control this by varying the degree to which each spring's compresses and extends (as the springs are passive, these systems are sometimes known as semi-active)."
|
||||||
|
|
|
@ -273,7 +273,7 @@ Injection could be offset using 'set injection_offset X' command.
|
||||||
While cranking, you can set angle-based ignition instead of timing map & dwell based ignition. In angle-based mode, dwell is defined in crankshaft angle duration and timing is constant. set cranking_charge_angle and set_cranking_timing_angle.
|
While cranking, you can set angle-based ignition instead of timing map & dwell based ignition. In angle-based mode, dwell is defined in crankshaft angle duration and timing is constant. set cranking_charge_angle and set_cranking_timing_angle.
|
||||||
|
|
||||||
|
|
||||||
See 'trigger decoding' in http://rusefi.com/docs/html/
|
See 'trigger decoding' in [Doxygen](http://rusefi.com/docs/html/)
|
||||||
|
|
||||||
May, 2020: Subaru SVX added
|
May, 2020: Subaru SVX added
|
||||||
|
|
||||||
|
|
|
@ -11,7 +11,7 @@ rusEFI firmware currently supports two protocols for ECU monitoring & control
|
||||||
[Java console code overview](Dev-Console-Implementation)
|
[Java console code overview](Dev-Console-Implementation)
|
||||||
|
|
||||||
|
|
||||||
2. binary protocol for integration with rusEFI console or http://www.tunerstudio.com/ tuning software
|
2. binary protocol for integration with rusEFI console or [TunerStudio](http://www.tunerstudio.com/) tuning software
|
||||||
See [tunerstudio.cpp](https://sourceforge.net/p/rusefi/code/HEAD/tree/trunk/firmware/console/binary/tunerstudio.cpp) for a brief description of this binary protocol
|
See [tunerstudio.cpp](https://sourceforge.net/p/rusefi/code/HEAD/tree/trunk/firmware/console/binary/tunerstudio.cpp) for a brief description of this binary protocol
|
||||||
|
|
||||||
For physical level rs232 is used ("serial port") - either via a FL232 chip or by emulating a USB device right within stm32f4. A bluetooth option is also available.
|
For physical level rs232 is used ("serial port") - either via a FL232 chip or by emulating a USB device right within stm32f4. A bluetooth option is also available.
|
||||||
|
|
|
@ -1 +1 @@
|
||||||
See https://github.com/rusefi/rusefi/blob/master/firmware/controllers/algo/obd_error_codes.h
|
See [OBD Error Codes header](https://github.com/rusefi/rusefi/blob/master/firmware/controllers/algo/obd_error_codes.h)
|
||||||
|
|
|
@ -1,6 +1,6 @@
|
||||||
While we have code and unit test coverage, no one has documented actual usage on real vehicle. Most of rusEFI contributors are
|
While we have code and unit test coverage, no one has documented actual usage on real vehicle. Most of rusEFI contributors are
|
||||||
into road racing so launch is a bit off the radar :(
|
into road racing so launch is a bit off the radar :(
|
||||||
|
|
||||||
See also https://rusefi.com/forum/viewtopic.php?t=871
|
See also [the launch control forum thread](https://rusefi.com/forum/viewtopic.php?t=871)
|
||||||
|
|
||||||
See also [Feature Requests Feature Bounty Program](Feature-Requests-the-Feature-Bounty-Program)
|
See also [Feature Requests Feature Bounty Program](Feature-Requests-the-Feature-Bounty-Program)
|
||||||
|
|
|
@ -1,7 +1,7 @@
|
||||||
https://www.lammertbies.nl/comm/cable/RS-232.html
|
[RS232 Serial Cables Pinout](https://www.lammertbies.nl/comm/cable/RS-232.html)
|
||||||
|
|
||||||
|
|
||||||
https://www.maximintegrated.com/en/products/interface/transceivers/MAX3232.html
|
[MAX3232](https://www.maximintegrated.com/en/products/interface/transceivers/MAX3232.html)
|
||||||
|
|
||||||
|
|
||||||
[Laird CL4490](CL4490)
|
[Laird CL4490](CL4490)
|
||||||
|
|
|
@ -2,12 +2,12 @@ automated manual transmission
|
||||||
|
|
||||||
semi-automatic transmission
|
semi-automatic transmission
|
||||||
|
|
||||||
http://www.sqsracing.com/produkt/296:384:sqs-sequent-shifter-mitsubishi-evo
|
[SQS sequential shifter](http://www.sqsracing.com/produkt/296:384:sqs-sequent-shifter-mitsubishi-evo)
|
||||||
|
|
||||||
![Automated Manual Actuator](Images/Sequential.png)
|
![Automated Manual Actuator](Images/Sequential.png)
|
||||||
|
|
||||||
https://www.physicsforums.com/threads/h-pattern-to-sequential-shifter.563586/
|
[H pattern to sequential shifter](https://www.physicsforums.com/threads/h-pattern-to-sequential-shifter.563586/)
|
||||||
|
|
||||||
https://www.miataturbo.net/suspension-brakes-drivetrain-49/pneumatic-sequential-shifter-93080
|
[Pneumatic sequential shifter](https://www.miataturbo.net/suspension-brakes-drivetrain-49/pneumatic-sequential-shifter-93080)
|
||||||
|
|
||||||
clutch
|
clutch
|
||||||
|
|
|
@ -1,6 +1,6 @@
|
||||||
http://www.pololu.com/product/1182
|
[Pololu A4988 Stepper Motor Driver Carrier](http://www.pololu.com/product/1182)
|
||||||
|
|
||||||
http://www.pololu.com/file/download/a4988_DMOS_microstepping_driver_with_translator.pdf?file_id=0J450
|
[A4988 DMOS Microstepping Driver With Translator datasheet](http://www.pololu.com/file/download/a4988_DMOS_microstepping_driver_with_translator.pdf?file_id=0J450)
|
||||||
|
|
||||||
Use a jumper or wire to connect SLEEP with RESET
|
Use a jumper or wire to connect SLEEP with RESET
|
||||||
|
|
||||||
|
@ -10,8 +10,8 @@ We do not have our own add-on board for a4988, we use ones from eBay like "stepp
|
||||||
|
|
||||||
![Stepper Motor Driver](Images/stepper_motor_driver.jpg)
|
![Stepper Motor Driver](Images/stepper_motor_driver.jpg)
|
||||||
|
|
||||||
http://rusefi.com/forum/viewtopic.php?f=5&t=767
|
[Stepper Motor Logic](http://rusefi.com/forum/viewtopic.php?f=5&t=767)
|
||||||
|
|
||||||
pinout: http://rusefi.com/forum/viewtopic.php?f=5&t=767&start=30#p17671
|
[pinout](http://rusefi.com/forum/viewtopic.php?f=5&t=767&start=30#p17671)
|
||||||
|
|
||||||
See http://rusefi.com/forum/viewtopic.php?f=4&t=1161
|
See [Frankenso: prototyping area stepper board install](http://rusefi.com/forum/viewtopic.php?f=4&t=1161)
|
||||||
|
|
|
@ -1,4 +1,4 @@
|
||||||
See also http://rusefi.com/articles/measuring_temperature/
|
See also [Measuring Temperature](http://rusefi.com/articles/measuring_temperature/)
|
||||||
|
|
||||||
See also [Frankenstein Analog Inputs](Hardware-Frankenstein#step-3-analog-inputs)
|
See also [Frankenstein Analog Inputs](Hardware-Frankenstein#step-3-analog-inputs)
|
||||||
|
|
||||||
|
@ -18,17 +18,17 @@ While troubleshooting CLT and IAT, the two most useful commands are `analoginfo`
|
||||||
|
|
||||||
## Some datapoints
|
## Some datapoints
|
||||||
|
|
||||||
http://rusefi.com/forum/viewtopic.php?f=3&t=864&start=60#p15344
|
[1996 Dodge RAM 1500 V8 Temp spreadsheet from FSM](http://rusefi.com/forum/viewtopic.php?f=3&t=864&start=60#p15344)
|
||||||
|
|
||||||
![IAT Thermistor settings](Images/IAT_screen.png)
|
![IAT Thermistor settings](Images/IAT_screen.png)
|
||||||
|
|
||||||
|
|
||||||
MLX90621
|
MLX90621
|
||||||
|
|
||||||
http://forum.arduino.cc/index.php?topic=126244.0
|
[MLX90620 / MLX90621 - 16X4 pixel IR thermal array](http://forum.arduino.cc/index.php?topic=126244.0)
|
||||||
|
|
||||||
http://www.melexis.com/Asset/Datasheet-IR-thermometer-16X4-sensor-array-MLX90620-DownloadLink-6099.aspx
|
[Broken Link](http://www.melexis.com/Asset/Datasheet-IR-thermometer-16X4-sensor-array-MLX90620-DownloadLink-6099.aspx)
|
||||||
|
|
||||||
http://www.melexis.com/Assets/Transition-from-MLX90620-to-MLX90621-6446.aspx
|
[Transition from MLX90620 to MLX90621](https://www.melexis.com/en/documents/documentation/how-it-works/how-it-works-transition-mlx90620-mlx90621)
|
||||||
|
|
||||||
![MLX90621 Pinout](Images/MLX90621_pinout.png)
|
![MLX90621 Pinout](Images/MLX90621_pinout.png)
|
||||||
|
|
Loading…
Reference in New Issue