rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

MRE

This commit is contained in:
rusefillc 2020-10-17 00:40:06 -04:00
parent dee0229a8b
commit e307e72e86
1 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
Hardware/microrusefi/Hardware-microRusEFI-wiring.md
View File

@ -52,18 +52,18 @@ Each pin has a *Type ID*, which can be used to look up in the following tables w
| 34 | **GP out 2** | gp_low (gp_pp) | Fan relay (IDLE stepper coil 1-) | orange |
| 35 | **GP out 1** | gp_low (gp_pp) | Fuel pump relay (IDLE stepper coil 1+) | orange |
| 36 | **AN Volt 8** | av | | orange |
| 37 | **Injector 1** | inj | Injector 1 |
| 38 | **Injector 2** | inj | Injector 2 |
| 39 | **5V Sensor 2** | 5v | MAP sensor supply |
| 40 | **AN Volt 9** | av | |
| 41 | **Injector 3** | inj | Injector 3 |
| 42 | **Injector 4** | inj | Injector 4 |
| 43 | **GP out 4** | gp_low (gp_pp) | (IDLE stepper coil 2+) |
| 44 | **5V Sensor 1** | 5v | TPS sensor supply |
| 45 | **VR+/Hall** | vr/hall | Crank VR+/hall |
| 46 | **VR-** | vr | Crank VR- (do not connect if hall) |
| 47 | **CAN low** | can | CAN bus |
| 48 | **CAN high** | can | CAN bus |
| 37 | **Injector 1** | inj | Injector 1 | grey |
| 38 | **Injector 2** | inj | Injector 2 | grey |
| 39 | **5V Sensor 2** | 5v | MAP sensor supply | grey |
| 40 | **AN Volt 9** | av | | grey |
| 41 | **Injector 3** | inj | Injector 3 | brown |
| 42 | **Injector 4** | inj | Injector 4 | brown |
| 43 | **GP out 4** | gp_low (gp_pp) | (IDLE stepper coil 2+) | brown |
| 44 | **5V Sensor 1** | 5v | TPS sensor supply | brown |
| 45 | **VR+/Hall** | vr/hall | Crank VR+/hall | light green |
| 46 | **VR-** | vr | Crank VR- (do not connect if hall) | light green |
| 47 | **CAN low** | can | CAN bus | light green |
| 48 | **CAN high** | can | CAN bus | light green |
In some cases without "main relay output +12v" both pins #1 and #5 should be connected to the single source of +12v.