merge rusEFI wiki
This commit is contained in:
commit
f96fa5d4bd
|
@ -0,0 +1,27 @@
|
|||
## HOWTO test brand new ECU design which was never fabricated before
|
||||
|
||||
If dealing with a brand new never before tested hardware design it's recommended to gradually add wires one by one.
|
||||
|
||||
# Prerequisites for each testing session
|
||||
|
||||
1. Charge battery
|
||||
1. Disconnect battery charger
|
||||
1. Warm up car on stock ECU
|
||||
|
||||
# Power
|
||||
|
||||
1. Write down battery voltage measured at the battery, with charger and all ECUs physically disconnected.
|
||||
1. Hook up Power GND
|
||||
1. Hook up ECU power source
|
||||
1. Test & Report, with USB physically disconnected: ECU status LED starts to blink if powered up, ECU status and all LED go off when powered off.
|
||||
1. Test & Report, with USB physically disconnected: Attempt cranking. Upload & link log to report.
|
||||
1. Charge laptop battery, disconnect laptop from wall charger.
|
||||
|
||||
|
||||
|
||||
|
||||
1. Connect ECU to laptop via USB.
|
||||
1. Test & Report, with USB physically disconnected: ECU status LED starts to blink if powered up, ECU status and all LED go off when powered off.
|
||||
|
||||
|
||||
|
Loading…
Reference in New Issue