rusefi
/
rusefi_documentation
mirror of https://github.com/rusefi/rusefi_documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated HOWTO Miata NB2 on Proteus (markdown)

This commit is contained in:
CrazyStriker 2020-12-20 18:21:50 +01:00
parent 7bd03d5c13
commit fbdbd55c33
1 changed files with 62 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
HOWTO-Miata-NB2-on-Proteus.md
View File

@ -21,10 +21,68 @@ Leds indicators let you see which outputs are activated, and included flyback di
All the OEM pins are wired through a bridge closed by either a 0 ohm 0805 jumper or a jumper wire, letting you reallocate OEM connector pin as you want.
Two 23 pins Ampseal extension connectors allows you to wire more functions like boost control, WBO2, CAN bus communication, ETB, etc.. You can use all outputs Proteus has to offer you and on a 4 cylinder with single VVT it means a lot of extra functions.
## Pin mapping
The board pin mapping for OEM connector follows the tab given in the Pinning section below.
For the extension connectors the pinnig is the following \:
| PnP extension pin | Proteus pin | Type ID | Function |
| -----------------:|------------:|--------------:|-------------------:|
| A1| | | |
| A2| | | |
| A3| | | |
| A4| | | |
| A5| | | |
| A6| | | |
| A7| | | |
| A8| | | |
| A9| | | |
| A10| | | |
| A11| | | |
| A12| | | |
| A13| | | |
| A14| | | |
| A15| | | |
| A16| | | |
| A17| | | |
| A18| | | |
| A19| | | |
| A20| | | |
| A21| | | |
| A22| | | |
| A23| | | |
| | | | |
| B1| | | |
| B2| | | |
| B3| | | |
| B4| | | |
| B5| | | |
| B6| | | |
| B7| | | |
| B8| | | |
| B9| | | |
| B10| | | |
| B11| | | |
| B12| | | |
| B13| | | |
| B14| | | |
| B15| | | |
| B16| | | |
| B17| | | |
| B18| | | |
| B19| | | |
| B20| | | |
| B21| | | |
| B22| | | |
| B23| | | |
## Interface with proteus
At the moment, the interface between Proteus board and the PnP adapter is handled by hacked up Ampseal connectors. To do that you need to source the male connectors used on Proteus, and cut the plastic shroud on the connector side, flush with the watertight seal if there is any, or with the mounting flange.
@ -47,11 +105,11 @@ A few improvment would make this board really plug and play and easier to use
| Pin Number | Name | Proteus pin | Type ID | Default function |
| ----------:|:-------- | ------------ | ------------ |:---------------------------------------------------- |
| 2A | Inj 1 | B3| Low-Side 1 | Injector #1 |
| 2B | Fan | B9| Low-Side 11 | Radiator Fan Control Relay Output |
| 2C | A/C Fan | --| Low-Side xx | A/C Fan Control Relay Output |
| 2A | Inj 1 | B3| Low-Side 1 | Injector #1 |
| 2B | Fan | B9| Low-Side 11 | Radiator Fan Control Relay Output |
| 2C | A/C Fan | --| Low-Side xx | A/C Fan Control Relay Output |
| 2D | Inj 2 |B15| Low-Side 2 | Injector #2 |
| 2G | Inj 3 | B4| Low-Side 3 | Injector #3 |
| 2G | Inj 3 | B4| Low-Side 3 | Injector #3 |
| 2J | Inj 4 |B16| Low-Side 4 | Injector #4 |
| 2O | - | | x | x |
| 2M | Fuel Pump |B6 | Low-Side 6 | Fuel Pump Relay Output |