# [rusEFI project](rusEFI-project)
## Fuel
[Injection settings](#Injection-settings)

[Injector dead time](#Injector-dead-time)

[Fuel short-term closed-loop correction](#Fuel-short-term-closed-loop-correction)

[Coasting Fuel Cutoff Settings](#Coasting-Fuel-Cutoff-Settings)

[Fuel Table](#Fuel-Table)

[Injection Phase](#Injection-Phase)

[Warmup fuel manual Multiplier](#Warmup-fuel-manual-Multiplier)

[Intake air temperature fuel Multiplier](#Intake-air-temperature-fuel-Multiplier)

[tCharge Settings](#tCharge-Settings)

[Accel/Decel Enrichment](#Accel/Decel-Enrichment)

[TPS/TPS Acceleration Extra Fuel(ms)](#TPS/TPS-Acceleration-Extra-Fuel(ms))

[Engine Load Acceleration Enrichment Taper](#Engine-Load-Acceleration-Enrichment-Taper)

### Injection settings
![x](overview/TS_generated/dialog_Injection_settings.png)

Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection

Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection

Two wire batch emulation: This is needed if your coils are individually wired and you wish to use batch injection.
enable two_wire_batch_injection

### Injector dead time
![x](overview/TS_generated/dialog_Injector_dead_time.png)

### Fuel short-term closed-loop correction
![x](overview/TS_generated/dialog_Fuel_short-term_closed-loop_correction.png)

### Coasting Fuel Cutoff Settings
![x](overview/TS_generated/dialog_Coasting_Fuel_Cutoff_Settings.png)

Enable Coasting Fuel Cutoff: This setting disables fuel injection while the engine is in overrun, this is useful as a fuel saving measure and to prevent back firing.

TPS Deactivation Threshold(%): percent between 0 and 100 below which the fuel cut is deactivated, this helps low speed drivability.

### Fuel Table
![x](overview/TS_generated/dialog_Fuel_Table.png)

### Injection Phase
![x](overview/TS_generated/dialog_Injection_Phase.png)

### Warmup fuel manual Multiplier
![x](overview/TS_generated/dialog_Warmup_fuel_manual_Multiplier.png)

### Intake air temperature fuel Multiplier
![x](overview/TS_generated/dialog_Intake_air_temperature_fuel_Multiplier.png)

### tCharge Settings
![x](overview/TS_generated/dialog_tCharge_Settings.png)

### Accel/Decel Enrichment
![x](overview/TS_generated/dialog_Accel_Decel_Enrichment.png)

### TPS/TPS Acceleration Extra Fuel(ms)
![x](overview/TS_generated/dialog_TPS_TPS_Acceleration_Extra_Fuelms.png)

### Engine Load Acceleration Enrichment Taper
![x](overview/TS_generated/dialog_Engine_Load_Acceleration_Enrichment_Taper.png)


generated by class com.rusefi.MdGenerator on Fri May 01 14:57:55 EDT 2020