diff --git a/corrections.ino b/corrections.ino
index 161c7ed..c348225 100644
--- a/corrections.ino
+++ b/corrections.ino
@@ -21,11 +21,11 @@ byte correctionASE()
   
   if (currentStatus.runSecs < configPage1.aseCount) 
   {
-    BIT_SET(currentStatus.engine,3); //Mark ASE as active.
-    return configPage1.asePct;
+    BIT_SET(currentStatus.engine, BIT_ENGINE_ASE); //Mark ASE as active.
+    return 100 + configPage1.asePct;
   }
   
-  BIT_CLEAR(currentStatus.engine,3); //Mark ASE as inactive.
+  BIT_CLEAR(currentStatus.engine, BIT_ENGINE_ASE); //Mark ASE as inactive.
   return 100;
    
   
diff --git a/reference/speeduino 0.1.ini b/reference/speeduino 0.1.ini
index ac35dfa..6442dfb 100644
--- a/reference/speeduino 0.1.ini	
+++ b/reference/speeduino 0.1.ini	
@@ -319,16 +319,24 @@
    dialog = crankPW, "Cranking Pulsewidths (ms)"
      #if CELSIUS
     field = "Cranking RPM (Max)", crankRPM
+    field = "Flood Clear level", tpsflood
+    field = ""
 	field = "Priming Pulsewidth", primePulse
 	field = "Pulsewidth at -40°C", crankCold
 	field = "Pulsewidth at 77°C", crankHot
-	field = "Flood Clear level", tpsflood
+	field = ""
+ 	field = "Enrichment %", asePct
+ 	field = "Number of Ignition Cycles", aseCount
      #else
     field = "Cranking RPM (Max)", crankRPM
+	field = "Flood Clear level", tpsflood
+	field = ""
 	field = "Priming Pulsewidth", primePulse
 	field = "Pulsewidth at -40°F", crankCold
 	field = "Pulsewidth at 170°F", crankHot
-	field = "Flood Clear level", tpsflood
+	field = ""
+ 	field = "Enrichment %", asePct
+ 	field = "Number of Ignition Cycles", aseCount
      #endif
      
    dialog = aseSettings, "Afterstart Enrichment"
diff --git a/timers.ino b/timers.ino
index 927b76a..26856f2 100644
--- a/timers.ino
+++ b/timers.ino
@@ -42,7 +42,7 @@ ISR(TIMER2_OVF_vect)
     //**************************************************************************************************************************************************
     //This updates the runSecs variable
     //If the engine is running or cranking, we need ot update the run time counter.
-    if ((BIT_CHECK(currentStatus.engine, BIT_ENGINE_RUN) || BIT_CHECK(currentStatus.engine, BIT_ENGINE_CRANK)))
+    if (BIT_CHECK(currentStatus.engine, BIT_ENGINE_RUN))
     { //NOTE - There is a potential for a ~1sec gap between engine crank starting and ths runSec number being incremented. This may delay ASE!         
       if (currentStatus.runSecs <= 254) //Ensure we cap out at 255 and don't overflow. (which would reset ASE)
         { currentStatus.runSecs++; } //Increment our run counter by 1 second.