mirror of https://github.com/rusefi/speeduino.git
Fix for hard limiter regression
This commit is contained in:
parent
6624d9494c
commit
1e4332d62d
|
@ -897,6 +897,8 @@ void loop()
|
|||
//| BEGIN IGNITION CALCULATIONS
|
||||
BIT_CLEAR(currentStatus.spark, BIT_SPARK_SFTLIM);
|
||||
if (currentStatus.RPM > ((unsigned int)(configPage2.SoftRevLim) * 100) ) { currentStatus.advance = configPage2.SoftLimRetard; BIT_SET(currentStatus.spark, BIT_SPARK_SFTLIM); } //Softcut RPM limit (If we're above softcut limit, delay timing by configured number of degrees)
|
||||
BIT_CLEAR(currentStatus.spark, BIT_SPARK_HRDLIM);
|
||||
if (currentStatus.RPM > ((unsigned int)(configPage2.HardRevLim) * 100) ) { BIT_SET(currentStatus.spark, BIT_SPARK_HRDLIM); } //Hardcut RPM limit
|
||||
if (currentStatus.launchingSoft) { currentStatus.advance = configPage3.lnchRetard; } //SoftCut rev limit for 2-step launch control
|
||||
|
||||
//Set dwell
|
||||
|
@ -1055,9 +1057,10 @@ void loop()
|
|||
//Check for hard cut rev limit (If we're above the hardcut limit, we simply don't set a spark schedule)
|
||||
//crankAngle = getCrankAngle(timePerDegree); //Refresh with the latest crank angle
|
||||
|
||||
//fixedCrankingOverride is used to extend the dwell during cranking so that the decoder can trigger the spark upon seeing a certain tooth. Currently only available on the basic distributor and 4g63 decoders.
|
||||
if ( BIT_CHECK(currentStatus.engine, BIT_ENGINE_CRANK) ) { fixedCrankingOverride = currentStatus.dwell; }
|
||||
|
||||
if(ignitionOn && !currentStatus.launchingHard && !BIT_CHECK(currentStatus.spark, BIT_SPARK_BOOSTCUT))
|
||||
if(ignitionOn && !currentStatus.launchingHard && !BIT_CHECK(currentStatus.spark, BIT_SPARK_BOOSTCUT) && !BIT_CHECK(currentStatus.spark, BIT_SPARK_HRDLIM))
|
||||
{
|
||||
//if ( (ignition1StartAngle > crankAngle))// && ign1LastRev != startRevolutions)
|
||||
//if ((ignition1StartAngle > crankAngle) == 0)
|
||||
|
|
Loading…
Reference in New Issue