rusefi
/
speeduino
mirror of https://github.com/rusefi/speeduino.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Allow for leading/trailing edge selection on missing tooth and dual wheel decoders

This commit is contained in:
Josh Stewart 2016-11-18 14:28:33 +11:00
parent 34780378c6
commit af40812586
3 changed files with 17 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
globals.h
View File

@ -267,8 +267,10 @@ struct config2 {
byte IgInv : 1;
byte oddfire : 1;
byte TrigPattern : 4;
byte TrigEdgeSec : 1;
byte unused4_6b : 7;
byte unused4_6;
byte unused4_7;
byte IdleAdvRPM;
byte IdleAdvCLT; //The temperature below which the idle is advanced

11
reference/speeduino.ini
View File

@ -246,7 +246,14 @@ page = 4
IgInv = bits, U08, 5[2:2], "Going Low", "Going High"
oddfire = bits, U08, 5[3:3], "No", "Yes"
TrigPattern= bits, U08, 5[4:7], "Missing Tooth", "Basic Distributor", "Dual Wheel", "GM 7X", "4G63 / Miata", "GM 24X", "Jeep 2000", "Audi 135", "Honda D17", "Miata 99-05", "Mazda AU", "Non-360 Dual", "INVALID", "INVALID", "INVALID", "INVALID"
unused4-6 = scalar, U08, 6, "Deg", 0.352,-28.4, -10, 80, 0
TrigEdgeSec= bits, U08, 6[0:0], "Leading", "Trailing"
unused4-6b = bits, U08, 6[1:1], "No", "Yes"
unused4-6c = bits, U08, 6[2:2], "No", "Yes"
unused4-6d = bits, U08, 6[3:3], "No", "Yes"
unused4-6e = bits, U08, 6[4:4], "No", "Yes"
unused4-6f = bits, U08, 6[5:5], "No", "Yes"
unused4-6g = bits, U08, 6[6:6], "No", "Yes"
unused4-6h = bits, U08, 6[7:7], "No", "Yes"
unused4-7 = scalar, U08, 7, "ADC", 1, 0, 0, 255, 0
IdleAdvRPM = scalar, U08, 8, "RPM", 100, 0, 0, 1200, 0
#if CELSIUS
@ -684,6 +691,7 @@ menuDialog = main
TrigAngMul = "A multiplier used by non-360 degree tooth wheels (i.e. Wheels where the tooth count doesn't divide evenly into 360. Usage: (360 * <multiplier>) / tooth_count = Whole number"
StgCycles = "The number of revolutions that will be skipped during cranking before the injectors and coils are fired."
TrigEdge = "The Trigger edge of the primary sensor.\nLeading.\nTrailing."
TrigEdgeSec = "The Trigger edge of the secondary (Cam) sensor.\nLeading.\nTrailing."
TrigFilter = "Tuning of the trigger filter algorithm. The more aggressive the setting, the more noise will be removed, however this increases the chance of some true readings being filtered out (False positive). Medium is safe for most setups. Only select 'Aggressive' if no other options are working"
sparkMode = "Wasted Spark: Ignition outputs are on the channels <= half the number of cylinders. Eg 4 cylinder outputs on IGN1 and IGN2.\nSingle Channel: All ignition pulses are output on IGN1.\nWasted COP: Ignition pulses are output on all ignition channels up to the number of cylinders. Eg 4 cylinder outputs on all ignition channels. No valid for >4 cylinders"
@ -905,6 +913,7 @@ menuDialog = main
field = "Note: This is the number of revolutions that will be skipped during"
field = "cranking before the injectors and coils are fired"
field = "Trigger edge", TrigEdge
field = "Secondary trigger edge", TrigEdgeSec, { TrigPattern == 0 || TrigPattern == 2 }
field = "Trigger Filter", TrigFilter
dialog = sparkSettings,"Spark Settings",4

6
speeduino.ino
View File

@ -328,7 +328,8 @@ void setup()
if(configPage2.TrigEdge == 0) { attachInterrupt(triggerInterrupt, trigger, RISING); } // Attach the crank trigger wheel interrupt (Hall sensor drags to ground when triggering)
else { attachInterrupt(triggerInterrupt, trigger, FALLING); }
attachInterrupt(triggerInterrupt2, triggerSec_missingTooth, RISING);
if(configPage2.TrigEdgeSec == 0) { attachInterrupt(triggerInterrupt2, triggerSec_missingTooth, RISING); }
else { attachInterrupt(triggerInterrupt2, triggerSec_missingTooth, FALLING); }
break;
case 1:
@ -350,7 +351,8 @@ void setup()
if(configPage2.TrigEdge == 0) { attachInterrupt(triggerInterrupt, trigger, RISING); } // Attach the crank trigger wheel interrupt (Hall sensor drags to ground when triggering)
else { attachInterrupt(triggerInterrupt, trigger, FALLING); }
attachInterrupt(triggerInterrupt2, triggerSec_DualWheel, RISING);
if(configPage2.TrigEdgeSec == 0) { attachInterrupt(triggerInterrupt2, triggerSec_DualWheel, RISING); }
else { attachInterrupt(triggerInterrupt2, triggerSec_DualWheel, FALLING); }
break;
case 3: