Go to file
Josh Stewart 3e4408913b Update README.md 2016-02-25 13:21:32 +11:00
libs [Arduino 1.6.6+ Required!] Utilise the included libs without needing to copy or move them. 2016-01-05 23:02:24 +11:00
reference Initial commit of DFCO (Untested on a car, working on bench) 2016-02-25 13:11:13 +11:00
.gitignore Further work on v0.4 board 2015-06-28 22:50:20 +10:00
LICENSE Add explicit license information 2015-05-29 09:49:44 +10:00
README.md Update README.md 2016-02-25 13:21:32 +11:00
auxiliaries.h Complete but untested boost and vvt 2015-09-27 16:41:07 +10:00
auxiliaries.ino Fix wrong timer disable on idle setup 2016-02-05 06:25:07 +11:00
comms.h Added comments in code 2015-10-13 17:49:17 -05:00
comms.ino Experimental 3 wire idle support 2016-01-13 17:06:55 +11:00
corrections.h Fixes and performance improvements to TAE 2015-02-17 16:31:26 +11:00
corrections.ino Initial commit of DFCO (Untested on a car, working on bench) 2016-02-25 13:11:13 +11:00
decoders.h Initial commit of Honda D17 decoder (Crank only) 2016-02-17 12:37:54 +11:00
decoders.ino Improvements to D17 decoder 2016-02-18 15:00:08 +11:00
display.h Initial I2C OLED display work. Functioning. 2015-03-01 08:27:16 +11:00
display.ino [Arduino 1.6.6+ Required!] Utilise the included libs without needing to copy or move them. 2016-01-05 23:02:24 +11:00
fastAnalog.h Add scope guards to header files 2015-02-14 14:11:43 +01:00
globals.h Initial commit of DFCO (Untested on a car, working on bench) 2016-02-25 13:11:13 +11:00
idle.h Experimental 3 wire idle support 2016-01-13 17:06:55 +11:00
idle.ino Fix wrong timer disable on idle setup 2016-02-05 06:25:07 +11:00
math.h Fixes for potential overflows in fast division operations 2015-12-13 09:17:55 +11:00
scheduler.h Voltage correction tables added (Not currently used) 2015-03-24 13:12:35 +11:00
scheduler.ino Comment improvements 2016-01-22 12:40:17 +11:00
speeduino.ino Initial commit of Honda D17 decoder (Crank only) 2016-02-17 12:37:54 +11:00
storage.h EEPROM save and load for boost and vvt tables 2015-09-25 21:02:15 +10:00
storage.ino Fix boost and vvt eeprom offsets 2015-09-28 21:57:27 +10:00
table.h Experimental new fast caching on 2D tables (Similar to what is done on 3D tables) 2016-01-05 08:01:31 +11:00
table.ino Experimental new fast caching on 2D tables (Similar to what is done on 3D tables) 2016-01-05 08:01:31 +11:00
timers.h Add tacho output pulse 2015-04-14 14:41:44 +10:00
timers.ino Add fuel pump priming 2015-12-21 15:45:52 +11:00
utils.h Large improvements to the ADC filtering system (Performance and flexibility) 2016-02-10 10:48:25 +11:00
utils.ino Complete some of the pin mappings for older boards 2016-01-22 12:43:34 +11:00

README.md

Speeduino

FAQ:

Q: Speeduino, didn't you used to be called something else?

A: Initial aim was for a simple DIY ECU for go-karts and the original project title was kartduino. As it became apparent that we wanted to extend support to larger vehicles, the name became a bit misleading. The important ideas though remain the same and the priority is still SIMPLICITY! The code is written with simplicity above all else in mind and all areas are well commented. The project can be loaded directly into the Arduino IDE and compiled with only a single additional library needing to be added. Where code is complex or low level, a high level pseudo code example is given to explain what is being performed.

========================================================================

Q: Arduino ECU,pffft, heard THAT before. Does this one actually work?

A: Yep! 1, 2, 4, 6 and 8 cylinder engines have all run, fuel and ignition, off Speeduino.

========================================================================

Q: So what can it do?

A: Take a look at this page for details: http://speeduino.com/wiki/index.php/Overview

========================================================================

Q: Target platform?

A: Arduino Mega (Or other ATmega1280 / ATmega2560 powered SKU) will be required. Standard arduino models are not suitable for multi-cylinder engines due to their lack of 16-bit timers. The shield board has been designed around the Mega and it is not expected that there will be a non-Mega variant.

========================================================================

Q: I'm trying to get started or need some general help. What should I do?

A: Support is all through the forum at: http://speeduino.com/forum

========================================================================

Q: I must know more! How can I contact you?

A: Come and visit the forum : http://speeduino.com/forum

If you still need some more info, feel free to drop me a line: noisymime (AT) gmail (dot) com