wideband/firmware/wideband_config.h

43 lines
1.0 KiB
C

#pragma once
// Fundamental board constants
#define VCC_VOLTS (3.3f)
#define HALF_VCC (VCC_VOLTS / 2)
#define ADC_MAX_COUNT (4095)
#define ADC_OVERSAMPLE 24
// *******************************
// Nernst voltage & ESR sense
// *******************************
#define NERNST_INPUT_GAIN (1 / 2.7f)
// Nernst AC injection resistor value
#define ESR_SUPPLY_R (22000)
// *******************************
// Pump current sense
// *******************************
#define PUMP_CURRENT_SENSE_GAIN (10)
// LSU sense resistor - 61.9 ohms
#define LSU_SENSE_R (61.9f)
// *******************************
// Pump controller
// *******************************
#define NERNST_TARGET (0.45f)
// *******************************
// Heater controller config
// *******************************
#define HEATER_CONTROL_PERIOD 50
#define HEATER_PREHEAT_TIME 5000
#define HEATER_WARMUP_TIMEOUT 15000
#define HEATER_CLOSED_LOOP_THRESHOLD_ESR 2000
#define HEATER_TARGET_ESR 300
#define HEATER_OVERHEAT_ESR 200
#define HEATER_UNDERHEAT_ESR 3000