wideband/firmware/boards/f1_rev3/wideband_board_config.h

53 lines
1.4 KiB
C

#pragma once
// TS settings
#define TS_SIGNATURE "rusEFI 2023.05.10.wideband_f1"
// Fundamental board constants
#define VCC_VOLTS (3.3f)
#define HALF_VCC (VCC_VOLTS / 2)
#define ADC_MAX_COUNT (4095)
#define ADC_OVERSAMPLE 24
// *******************************
// Nernst voltage & ESR sense
// *******************************
#define NERNST_INPUT_GAIN (3.0f)
// *******************************
// Battery Sensing
// *******************************
// 100K + 10K divider
#define BATTERY_INPUT_DIVIDER (10.0 / (10.0 + 100.0))
// *******************************
// Heater low side Sensing
// *******************************
// 100K + 10K divider
#define HEATER_INPUT_DIVIDER (10.0 / (10.0 + 100.0))
// *******************************
// Vm output Sensing
// *******************************
// 100K + 10K divider
#define VM_INPUT_DIVIDER (10.0 / (10.0 + 100.0))
#define AFR_CHANNELS 1
// *******************************
// Nernst voltage & ESR sense
// *******************************
#define VM_RESISTOR_VALUE (0)
// *******************************
// AUX outputs
// *******************************
// OpAmp with 82K + 160K
#define AUXOUT_GAIN ((82.0 + 160.0) / 160.0)
// *******************************
// TunerStudio Primary Port
// *******************************
#define TS_PRIMARY_SERIAL_PORT SD1
#define TS_PRIMARY_BAUDRATE 115200