From 0c5e12302c3dd0c5d45c1c624292b9b42047a94d Mon Sep 17 00:00:00 2001 From: Administrator Date: Fri, 14 Jul 2023 04:14:53 +0000 Subject: [PATCH] docs: update configuration/Staged_Injection --- configuration/Staged_Injection.md | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/configuration/Staged_Injection.md b/configuration/Staged_Injection.md index 3b6890f..8b779cc 100644 --- a/configuration/Staged_Injection.md +++ b/configuration/Staged_Injection.md @@ -2,9 +2,9 @@ title: Staged Injection description: Configuring multi-stage fuel injection published: true -date: 2023-03-06T05:46:28.934Z +date: 2023-07-14T04:14:43.859Z tags: -editor: undefined +editor: markdown dateCreated: 2020-01-06T01:54:09.173Z --- @@ -37,7 +37,8 @@ No matter which control strategy is chosen, you must enter the sizing of the pri * **Value entered into the req_fuel calculator :** 1000cc ![Staged fuel settings](/img/staging/staging_settings.PNG){.align-center width=400} -![REquired fuel calculator](/img/staging/staged_reqfuel.PNG){.align-center width=400} + +![Required fuel calculator](/img/staging/staged_reqfuel.PNG){.align-center width=400} ### Control methods Speeduino provides 2 staging control modes, each with their own strengths and weaknesses. In most cases it is recommended to start with the Automatic mode, which only requires tuning of the standard VE table, and reviewing to see if you get the desired outcome. Only if this can't be tuned to give a satisfactory fuel split would changing to the manual table tuning be recommended. @@ -60,11 +61,14 @@ One disadvantage of the table tuning method is that it does not allow for the fu #### Wiring +The wiring of injectors depends on the number of cylinders, the number of channels available on your ECU and whether you are using sequential fueling. + +##### Example Assuming a 4 cylinder even fire engine, the injectors are to be wired in pairs. Primary injectors on outputs 1 and 2. The secondary on outputs 3 and 4. -For other setups hit up the forum for clarification. +For other setups see the Hardware Configuration section above > **Note:** The dead time of the 2 sets of injectors is currently assumed to be the same. This may be altered in future firmwares if required (Post a feature request if needed). {.is-info}