mirror of https://github.com/speeduino/wiki.js.git
docs: update decoders/Missing_Tooth
This commit is contained in:
parent
d4aa93b828
commit
138e600572
|
@ -2,7 +2,7 @@
|
|||
title: Missing Tooth
|
||||
description: Information about the missing tooth decoder pattern
|
||||
published: true
|
||||
date: 2023-10-06T00:08:20.559Z
|
||||
date: 2023-10-10T21:59:13.184Z
|
||||
tags:
|
||||
editor: markdown
|
||||
dateCreated: 2020-01-06T00:30:19.883Z
|
||||
|
@ -34,7 +34,7 @@ If the starter motor is good and getting the right voltage ensure the mechanical
|
|||
|
||||
|
||||
### Tuner Studio Configuration
|
||||
![missingtooth_202108.png](/img/decoders/missingtooth_202108.png){.align-center}
|
||||
![Configuring the Missing Tooth pattern](/img/decoders/missingtooth_202108.png){.align-center}
|
||||
|
||||
**Fields:**
|
||||
|
||||
|
@ -45,9 +45,10 @@ If the starter motor is good and getting the right voltage ensure the mechanical
|
|||
### Timing Setting
|
||||
|
||||
The trigger angle can be found using the following steps:
|
||||
|
||||
1. Set the crankshaft at TDC 0° (Cylinder 1) with a tool by hand
|
||||
1. Rotate the crankshaft (running direction) until the first tooth after the missing teeth is under the sensor
|
||||
1. Measure how many degrees the crankshaft rotated. This is the value to enter as the trigger angle.
|
||||
2. Rotate the crankshaft (running direction) until the first tooth after the missing teeth is under the sensor
|
||||
3. Measure how many degrees the crankshaft rotated. This is the value to enter as the trigger angle.
|
||||
|
||||
### Sequential operation
|
||||
|
||||
|
@ -56,4 +57,4 @@ The missing tooth decoder supports sequential operation if an additional cam inp
|
|||
This cam signal should take the form of 4-1 cam trigger wheel or a single pulse every complete cycle. This can be a short tooth or a half moon type arrangement, provided that electrically there is only a single rising (or falling) pulse per cycle.
|
||||
|
||||
### Trigger Diagram
|
||||
![missingtooth_trace1.png](/img/decoders/missingtooth_trace1.png){.align-center}
|
||||
![Example missing tooth pulse pattern](/img/decoders/missingtooth_trace1.png){.align-center}
|
||||
|
|
Loading…
Reference in New Issue