speeduino
/
wiki.js
mirror of https://github.com/speeduino/wiki.js.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

docs: update configuration/Trigger_Setup

This commit is contained in:
Anthony Long 2021-01-31 04:34:58 +00:00 committed by Josh Stewart
parent 2637290303
commit 16212a9fdc
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
configuration/Trigger_Setup.md
View File

@ -2,7 +2,7 @@
title: Trigger Setup
description: Setting up the RPM trigger input to work correctly with the Speeduino decoder
published: true
date: 2021-01-20T10:36:01.063Z
date: 2021-01-31T04:34:51.789Z
tags:
editor: markdown
dateCreated: 2020-01-06T01:54:10.355Z
@ -35,7 +35,7 @@ Note that many of the settings on this dialog are dependant on your configuratio
- **Trigger edge** - Whether the primary signal triggers on the Rising or Falling edge. <b>VR Conditioners require specific setting depending on model used.</b> [See hardware requirements](/en/Hardware_requirements#inputs)
- **Secondary trigger edge** -Whether the secondary signal triggers on the Rising or Falling edge
- **Trigger filter** - A time based software filter that will ignore crank/cam inputs if they arrive sooner than expected based on the current RPM. The more aggressive the filter, the closer to the expected time the filter will operate. Higher levels of filtering may cause true pulses to be filtered out however, so it is recommended to use the lowest setting possible
- **Re-sync every cycle** - If set to yes, the system will look for the sync conditions every cycle rather than just counting the expected number of teeth. It is recommended that this option should be turned on, however if you have a noisy crank/cam signal you may need to turn it off as it can cause sync to drop out occassionally.
- **Re-sync every cycle** - If set to yes, the system will look for the sync conditions every cycle rather than just counting the expected number of teeth. It is recommended that this option should be turned on, however if you have a noisy crank/cam signal you may need to turn it off as it can cause sync to drop out occassionally. Once Speeduino has full sync it will continue to run in full sequential mode unless sync loss on crack trigger occurs.
## Finding tooth \#1 and trigger angle
Please refer to the [Trigger Patterns and Decoders](/decoders) for the trigger that you are using