diff --git a/configuration/Engine_Constants.md b/configuration/Engine_Constants.md
index c395767..b47c5a3 100644
--- a/configuration/Engine_Constants.md
+++ b/configuration/Engine_Constants.md
@@ -1,7 +1,12 @@
-
+---
+title: Engine_Constants
+description:
+published: true
+date: 2020-01-06T06:27:51.675Z
+tags:
+---
-Overview
---------
+## Overview
From the Settings menu, select Constants
@@ -11,13 +16,9 @@ From the Settings menu, select Constants
Here you need to setup the engine constants. Fill out the fields in the bottom section before calculating the Required Fuel.
-Settings
---------
+## Settings Description
-
-
-
-
+![engine.png](/constants/engine.png){.align-center}
- **Control Algorithm:** The load source that will be used for the fuel table
- **Squirts per Engine Cycle:** How many squirts will be performed over the duration of the engine cycle (Eg 720 degrees for a 4 stroke). most engines will not require values greater than 4. For sequential installations, this should be set to 2 with the injector staging set to 'Alternating'(Internally Speeduino will adjust the squirts to 1)
- Note that for 3 and 5 squirts, you must have a cam signal in addition to the crank.
@@ -37,6 +38,4 @@ Settings
- **MAP Sample Method:** How the MAP sensor readings will be processed:
- **Instantaneous:** Every reading is used as it is taken. Makes for a highly fluctuating signal, but can be useful for testing
- **Cycle Average:** The average sensor reading across 720 crank degrees is used. This is the recommended option for 4 of more cylinders
- - **Cycle Minimum:** The lowest value detected across 720 degrees is used. This is the recommended method for less than 4 cylinders or ITBs
-
-
\ No newline at end of file
+ - **Cycle Minimum:** The lowest value detected across 720 degrees is used. This is the recommended method for less than 4 cylinders or ITBs
\ No newline at end of file