From 32f9cec6cd6982987675625e5b98e3a9f20a5e68 Mon Sep 17 00:00:00 2001 From: Administrator Date: Sun, 20 Feb 2022 00:12:19 +0000 Subject: [PATCH] docs: update boards/Dropbear --- boards/Dropbear.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/boards/Dropbear.md b/boards/Dropbear.md index 925f591..0779451 100644 --- a/boards/Dropbear.md +++ b/boards/Dropbear.md @@ -2,7 +2,7 @@ title: Dropbear description: published: true -date: 2022-01-17T22:47:02.452Z +date: 2022-02-20T00:12:06.479Z tags: editor: markdown dateCreated: 2020-12-24T00:42:27.964Z @@ -147,4 +147,5 @@ The Dropbear ECU uses 2x 24 pin Delphi Sicma connectors. The connectors are keye - The board must be powered with 12v for the sensors to read correctly. If only connected via USB the sensors readings will not work correctly - **MAP reading is incorrect (Other sensors are OK)** - Check that the Internal/External MAP switch is set correctly on the board. -- +- **Which crimping tool should I use with these connectors?** + - The recommended tool is an **SN-28B** style crimper, which can generally be found fairly inexpensively and is straightforward to use.