mirror of https://github.com/speeduino/wiki.js.git
docs: update decoders/Missing_Tooth_(cam)
This commit is contained in:
parent
412c54cb98
commit
33256138d5
|
@ -2,7 +2,7 @@
|
|||
title: Missing Tooth (Cam speed)
|
||||
description:
|
||||
published: true
|
||||
date: 2020-01-07T05:01:47.638Z
|
||||
date: 2020-01-16T11:46:41.284Z
|
||||
tags: decoder
|
||||
---
|
||||
|
||||
|
@ -18,7 +18,7 @@ Missing tooth cam or distributor wheels can be used with cam or distributor whee
|
|||
Due to typically limited teeth, only half the teeth being read on each revolution, and the potential for reduced accuracy due to timing drive wear; the timing accuracy may be reduced in comparison to crank wheel systems. A figure of error cannot be predicted here as the wear or 'slop' of a given engine will be unique. However, it should be reasonable to assume the timing error will not exceed the accuracy of an OEM-equivalent cam-driven system such as typical distributor systems, or possibly better due to more sensor targets.
|
||||
|
||||
## Tuner Studio Configuration
|
||||
![missingtooth_cam_triggerconfig.png](/img/decoders/missingtooth_cam_triggerconfig.png =80%x){.align-center}
|
||||
![missingtooth_cam_triggerconfig.png](/img/decoders/missingtooth_cam_triggerconfig.png){.align-center width=450}
|
||||
|
||||
**Fields:**
|
||||
- Primary base teeth: This is the number of teeth the wheel would have if there were none missing, e.g. a 36-1 wheel has only 35 actual teeth, but you would enter 36 into this field.
|
||||
|
@ -32,4 +32,4 @@ The trigger angle is set in CRANK degrees, not cam.
|
|||
|
||||
## Trigger Pattern
|
||||
|
||||
![missingtooth_cam_trace.jpg](/img/decoders/missingtooth_cam_trace.jpg =75%x){.align-center}
|
||||
![missingtooth_cam_trace.jpg](/img/decoders/missingtooth_cam_trace.jpg){.align-center width75%}
|
||||
|
|
Loading…
Reference in New Issue