mirror of https://github.com/speeduino/wiki.js.git
docs: update speeduino_jarjestelman_komponentit
This commit is contained in:
parent
b87237e996
commit
370bf76175
|
@ -2,7 +2,7 @@
|
|||
title: Speeduino-järjestelmän komponentit
|
||||
description:
|
||||
published: true
|
||||
date: 2020-11-13T12:30:14.113Z
|
||||
date: 2020-11-13T12:35:21.365Z
|
||||
tags: elektroniikan komponentit
|
||||
editor: markdown
|
||||
dateCreated: 2020-11-13T12:11:48.259Z
|
||||
|
@ -21,9 +21,9 @@ Sisääntulot
|
|||
|
||||
### Kampia- ja nokka-akselin anturit
|
||||
|
||||
Nämä anturit ovat Speeduino järjestelmän toiminnan kannalta ne kaikista tärkeimmät. Arduinolle kulkevan signaalin tulee olla 0-5v kantti-muotoista aaltoa (kuvassa alla)
|
||||
Nämä anturit ovat Speeduino järjestelmän toiminnan kannalta ne kaikista tärkeimmät. Arduinolle kulkevan signaalin tulee olla 0-5v kantti-muotoista aaltoa (kuvassa alla), jonka tulee vastata hammaspyörän kuviota, joka pyörii kampi- tai nokka-akselin pyörintänopeudella.
|
||||
|
||||
This is arguably the most important sensor for Speeduino to function correctly. The signal going to the Arduino must be a 0v-5v square wave series of pulses (shown below) representing teeth on a wheel running at crank (or cam) speed. Many Hall and 'opto' sensors meet this digital square-wave spec. If only a crankshaft trigger wheel is used (no cam signal), the crank wheel must have a 'missing' tooth in order to provide position information as well as the engine RPM. Tested missing-tooth wheels currently are 4-1, 12-1, 36-1 and 60-2.
|
||||
Many Hall and 'opto' sensors meet this digital square-wave spec. If only a crankshaft trigger wheel is used (no cam signal), the crank wheel must have a 'missing' tooth in order to provide position information as well as the engine RPM. Tested missing-tooth wheels currently are 4-1, 12-1, 36-1 and 60-2.
|
||||
|
||||
For all timing signal parsing options see the [Trigger Patterns and Decoders](/decoders) page.
|
||||
|
||||
|
|
Loading…
Reference in New Issue