mirror of https://github.com/speeduino/wiki.js.git
docs: update boards/Dropbear
This commit is contained in:
parent
c0f8471e54
commit
406c4b2d76
|
@ -2,17 +2,31 @@
|
||||||
title: Dropbear
|
title: Dropbear
|
||||||
description:
|
description:
|
||||||
published: true
|
published: true
|
||||||
date: 2020-12-24T02:00:03.685Z
|
date: 2020-12-26T23:37:18.264Z
|
||||||
tags:
|
tags:
|
||||||
editor: markdown
|
editor: markdown
|
||||||
dateCreated: 2020-12-24T00:42:27.964Z
|
dateCreated: 2020-12-24T00:42:27.964Z
|
||||||
---
|
---
|
||||||
|
|
||||||
# Header
|
# Dropbear ECU
|
||||||
Your content here
|
The Dropbear is an 8 fuel + 8 ignition ECU that is currently in testing prior to a full production release. It is powered by the high speed Teensy 3.5 board and is designed to be a complete unit out of the box.
|
||||||
|
|
||||||
# Pin out
|
## Features
|
||||||
## Black Connector
|
|
||||||
|
- 8x high impedance injector drivers
|
||||||
|
- 8x 5v/12v coil pre-drivers (For use with igniters/smart coils)
|
||||||
|
- 6x medium current (2A) outputs
|
||||||
|
- 7x analog inputs
|
||||||
|
- 4x digital inputs
|
||||||
|
- CAN transceiver
|
||||||
|
- Onboard VR conditioner
|
||||||
|
- Swappable internal MAP sensors
|
||||||
|
- Onboard baro sensor
|
||||||
|
- Optional stepper motor driver
|
||||||
|
|
||||||
|
|
||||||
|
## Pin out
|
||||||
|
### Black Connector
|
||||||
![Connector_black.png](/img/boards/Connector_black.png){.align-center width=400}
|
![Connector_black.png](/img/boards/Connector_black.png){.align-center width=400}
|
||||||
|
|
||||||
| Pin | Direction | Max Current | Purpose | Comment |
|
| Pin | Direction | Max Current | Purpose | Comment |
|
||||||
|
@ -42,7 +56,7 @@ Your content here
|
||||||
| C7 | Input | N/A | Throttle Sensor | Connect to signal line of variable throttle position sensor (TPS). Other pins of sensor should connect to C1 and A3 |
|
| C7 | Input | N/A | Throttle Sensor | Connect to signal line of variable throttle position sensor (TPS). Other pins of sensor should connect to C1 and A3 |
|
||||||
| C8 | Input | N/A |External MAP Sensor| Signal line if using external MAP sensor. Input should be 0-5v and MAP source switch should be set to 'Ext.'. See below for 'Switch Configuration'. If using internal sensor this pin should be left unconnected. |
|
| C8 | Input | N/A |External MAP Sensor| Signal line if using external MAP sensor. Input should be 0-5v and MAP source switch should be set to 'Ext.'. See below for 'Switch Configuration'. If using internal sensor this pin should be left unconnected. |
|
||||||
|
|
||||||
## Grey Connector
|
### Grey Connector
|
||||||
![Connector_black.png](/img/boards/Connector_grey.png){.align-center width=400}
|
![Connector_black.png](/img/boards/Connector_grey.png){.align-center width=400}
|
||||||
|
|
||||||
| Pin | Direction | Max Current | Purpose | Comment |
|
| Pin | Direction | Max Current | Purpose | Comment |
|
||||||
|
|
Loading…
Reference in New Issue