From 4406bf5d0ba17e6825b95db58cfc1b7fa7d67cb8 Mon Sep 17 00:00:00 2001 From: Jason Arnold Date: Tue, 19 May 2020 03:57:08 +0000 Subject: [PATCH] docs: update configuration/Trigger_Setup --- configuration/Trigger_Setup.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configuration/Trigger_Setup.md b/configuration/Trigger_Setup.md index de6fd39..9dac828 100644 --- a/configuration/Trigger_Setup.md +++ b/configuration/Trigger_Setup.md @@ -2,7 +2,7 @@ title: Trigger Setup description: Setting up the RPM trigger input to work correctly with the Speeduino decoder published: true -date: 2020-01-19T11:38:58.299Z +date: 2020-05-19T03:57:04.713Z tags: --- @@ -36,4 +36,4 @@ Note that many of the settings on this dialog are dependant on your configuratio - **Re-sync every cycle** - If set to yes, the system will look for the sync conditions every cycle rather than just counting the expected number of teeth. It is recommended that this option should be turned on, however if you have a noisy crank/cam signal you may need to turn it off as it can cause sync to drop out occassionally. ## Finding tooth \#1 and trigger angle -Please refer to the [Decoder page](/decoders) for the trigger that you are using +Please refer to the [Trigger Patterns and Decoders](/decoders) for the trigger that you are using