mirror of https://github.com/speeduino/wiki.js.git
docs: update boards/Dropbear
This commit is contained in:
parent
f0a1574854
commit
483b08e124
|
@ -2,7 +2,7 @@
|
|||
title: Dropbear
|
||||
description:
|
||||
published: true
|
||||
date: 2021-03-12T23:59:51.357Z
|
||||
date: 2021-08-13T01:57:31.509Z
|
||||
tags:
|
||||
editor: markdown
|
||||
dateCreated: 2020-12-24T00:42:27.964Z
|
||||
|
@ -33,7 +33,7 @@ The ECU contains a dual onboard conditioner that can can be used with VR sensors
|
|||
When set for Hall sensors, this input will work with both the traditional ground switching sensor (the pullup resistor is on the board and does not need to be added) or a 0-12v signal as used on some GM vehicles.
|
||||
|
||||
#### Crank filter
|
||||
The board includes a variable hardware filter on the crank input that can be used to adjust the amount of capacitor filtering being used on this signal. This is designated `SW3` on the PCB and operates on both Hall and VR inputs.
|
||||
The board includes a variable hardware filter on the crank input that can be used to adjust the amount of capacitor filtering being used on this signal. This is designated `SW4` or `SW3` on the PCB and operates on both Hall and VR inputs.
|
||||
|
||||
> Changing this filter from the default setting (On/On) is not required in most cases. It should only be considered if the trigger is utilising 60+ teeth at crank speed.
|
||||
{.is-warning}
|
||||
|
|
Loading…
Reference in New Issue