mirror of https://github.com/speeduino/wiki.js.git
docs: update speeduino_jarjestelman_komponentit
This commit is contained in:
parent
1c338a9915
commit
65adb4b917
|
@ -2,7 +2,7 @@
|
||||||
title: Speeduino-järjestelmän komponentit
|
title: Speeduino-järjestelmän komponentit
|
||||||
description:
|
description:
|
||||||
published: true
|
published: true
|
||||||
date: 2020-12-09T18:44:52.058Z
|
date: 2020-12-09T18:47:48.373Z
|
||||||
tags: elektroniikan komponentit
|
tags: elektroniikan komponentit
|
||||||
editor: markdown
|
editor: markdown
|
||||||
dateCreated: 2020-11-13T12:11:48.259Z
|
dateCreated: 2020-11-13T12:11:48.259Z
|
||||||
|
@ -149,6 +149,8 @@ Lisäksi "Cranking bypass" tulee asettaa On -tilaan ja "Bypass output pin" tulee
|
||||||
<img src="https://raw.githubusercontent.com/speeduino/wiki/master/warmup/cranking_bypass.png" title="Fig. 4 Bypass settings" width="40%"/>
|
<img src="https://raw.githubusercontent.com/speeduino/wiki/master/warmup/cranking_bypass.png" title="Fig. 4 Bypass settings" width="40%"/>
|
||||||
|
|
||||||
</center>
|
</center>
|
||||||
|
Triggeri asetukset (TunerStudiossa *Starting > Trigger Setup*)
|
||||||
|
|
||||||
Trigger settings (under Starting / Trigger Setup in TunerStudio) should be as shown below. You will need to adjust the trigger angle to get correct timing. Instructions for this are in the wiki.
|
Trigger settings (under Starting / Trigger Setup in TunerStudio) should be as shown below. You will need to adjust the trigger angle to get correct timing. Instructions for this are in the wiki.
|
||||||
|
|
||||||
<center>
|
<center>
|
||||||
|
|
Loading…
Reference in New Issue