mirror of https://github.com/speeduino/wiki.js.git
docs: update Installing_Firmware
This commit is contained in:
parent
475dedfb4d
commit
6b208f2a5e
|
@ -2,7 +2,7 @@
|
|||
title: installation firmware
|
||||
description:
|
||||
published: true
|
||||
date: 2020-10-17T01:26:48.799Z
|
||||
date: 2020-10-17T01:34:31.952Z
|
||||
tags:
|
||||
editor: markdown
|
||||
dateCreated: 2020-10-16T22:01:54.254Z
|
||||
|
@ -55,19 +55,19 @@ Il y a deux méthodes pour obtenir le micrologiciel Speeduino:
|
|||
|
||||
### Compilation du micrologiciel
|
||||
|
||||
- Start the IDE, select *File > Open*, navigate to the location you downloaded Speeduino to and open the **speeduino.ino** file.
|
||||
- Set the board type: *Tools > Board > Arduino Mega 2560* or Mega ADK (This is the only board currently supported)
|
||||
- Click the **Verify** icon in the top left corner (Looks like a tick)
|
||||
- Démarrez le IDE, sélectionnez *Fichier > ouvrir*, navigez à l'emplacement où vous avez téléchargé le Speeduino et ouvrez le fichier **speeduino.ino**.
|
||||
- Sélectionnez le type de plaque: *Outils > Type de carte > Arduino Mega 2560* ou Mega ADK (Ce sont les deux seuls types supportés présentement)
|
||||
- Cliquez l'icone **Vérifier** dans le coin gauche en haut (ressemble à un crochet)
|
||||
|
||||
At this point you should have a compiled firmware! If you experienced a problem during the compile, see the [Troubleshooting](http://speeduino.com/wiki/index.php?title=Compiling_and_Installing_Firmware&action=edit§ion=4#Troubleshooting) section below.
|
||||
À ce point vous devriez avoir compilé le micrologiciel! Si vous rencontrez des problèmes voir le guide de dépannage : [dépannage](http://speeduino.com/wiki/index.php?title=Compiling_and_Installing_Firmware&action=edit§ion=4#Troubleshooting) plus bas. (Anglais seulement pour l'instant)
|
||||
|
||||
This video walks through the whole process of installing the firmware on your Arduino from scratch:
|
||||
Le video démontre la marche a suivre complète de l'installation du micro logiciel sur le arduino a partir de zéro:
|
||||
|
||||
<center>
|
||||
<iframe width="560" height="315" src="https://www.youtube.com/embed/AX9URou4JTs" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
|
||||
</center>
|
||||
|
||||
#### Optional (But recommended)
|
||||
#### Optionnel (Mais recommandé)
|
||||
|
||||
There is an option available for changing the compiler optimization level, which can improve . By default, the IDE uses the -Os compile option, which focuses on producing small binaries. As the size of the Speeduino code is not an issue but speed is a consideration, changing this to -O3 produces better results (Approximately 20% faster, with a 40% larger sketch size) To do this, you need to edit the platform.txt file:
|
||||
|
||||
|
|
Loading…
Reference in New Issue