mirror of https://github.com/speeduino/wiki.js.git
docs: update configuration/VE_table
This commit is contained in:
parent
8be55baf2d
commit
77d374f40d
|
@ -2,7 +2,7 @@
|
|||
title: Fuel (VE) table / map
|
||||
description: Configuration of the main fuel / VE table
|
||||
published: true
|
||||
date: 2020-06-25T01:00:24.616Z
|
||||
date: 2020-06-25T05:28:43.871Z
|
||||
tags: fuel, fuel table, tuning, ve table
|
||||
editor: markdown
|
||||
---
|
||||
|
@ -11,7 +11,7 @@ editor: markdown
|
|||
|
||||
The fuel or VE table is the primary method of controlling the amount of fuel that will be injected at each speed/load point.
|
||||
|
||||
![ve_table.png](/img/tuning/ve_table.png){.align-center width=400}
|
||||
![ve_table.png](/img/tuning/ve_table.png){.align-center width=450}
|
||||
|
||||
## Configuration
|
||||
The fuel map is a 3D, interpolated table that uses RPM and fuel load to lookup the desired VE value. The fuel load axis is determined by whether you are using Speed Density (MAP kPa) or Alpha-N (TPS) for your fuel load (See [Engine_Constants](/en/configuration/Engine_Constants))
|
||||
|
@ -29,7 +29,7 @@ The values in this table represent a percentage of the `Required Fuel` amount th
|
|||
|
||||
## Secondary Fuel table
|
||||
|
||||
![2nd_fuel_table.png](/img/tuning/2nd_fuel_table.png){.align-center width=400}
|
||||
![2nd_fuel_table.png](/img/tuning/2nd_fuel_table.png){.align-center width=450}
|
||||
|
||||
Speeduino also has the ability to use a secondary fuel table which allows for blended and switched mode fueling. There are 2 blended modes and 2 switched modes available.
|
||||
|
||||
|
@ -63,7 +63,14 @@ This is a blended fuel mode that is very similar to the above `Multipled %` mode
|
|||
This is a less commonly used mode, but is an alternative in the same setups that you would use `Multiplied %`
|
||||
|
||||
### Switched - Conditional
|
||||
Conditional switched mode will allow use of the 2nd fuel table when a certain value goes above a defined level. The available switching values are:
|
||||
|
||||
* RPM
|
||||
* Ethanol content
|
||||
* MAP
|
||||
* TPS
|
||||
|
||||
Dpending on the desired outcome, this can be used to expand the resolution of the main fuel table, automatically handle alternate fuels or as an alternative ITB mode (Particularly if running boosted ITBs).
|
||||
|
||||
### Switched - Input based
|
||||
|
||||
|
|
Loading…
Reference in New Issue