diff --git a/configuration/Engine_Constants.md b/configuration/Engine_Constants.md
index 29b6164..c462d16 100644
--- a/configuration/Engine_Constants.md
+++ b/configuration/Engine_Constants.md
@@ -2,7 +2,7 @@
 title: Engine Constants
 description: 
 published: true
-date: 2020-01-07T05:35:29.616Z
+date: 2020-01-15T00:43:48.976Z
 tags: TunerStudio
 ---
 
@@ -29,7 +29,7 @@ Here you need to setup the engine constants. Fill out the fields in the bottom s
 -   **Number of injectors:** Usually the same as number of cylinders (For port injection)
 -   **Engine Type:** Whether the crank angle between firings is the same for all cylinders. If using an Odd fire engine (Eg Some V-Twins and Buick V6s), the angle for each output channel must be specific.
 -   **Injector Layout:** Specifies how the injectors are wired in
-    -   **Paired:** 2 injectors are wires to each channel. The number of channels used is therefore equal to half the number of cylinders.
+    -   **Paired:** 2 injectors are wired to each channel. The number of channels used is therefore equal to half the number of cylinders.
     -   **Semi-Sequential:** Semi-sequential: Same as paired except that injector channels are mirrored (1&4, 2&3) meaning the number of outputs used are equal to the number of cylinders. Only valid for 4 cylinders or less.
     -   **Sequential**: 1 injector per output and outputs used equals the number of cylinders. Injection is timed over full cycle. Only available for engines with 4 or fewer cylinders.
 -   **Board Layout:** Specifies the input/output pin layout based on which Speeduino board you're using. For specific details of these pin mappings, see the utils.ino file