mirror of https://github.com/speeduino/wiki.js.git
docs: update boards/MX5_PNP
This commit is contained in:
parent
a388ca8502
commit
891d525cb8
|
@ -2,9 +2,9 @@
|
|||
title: Miata/MX5 89-95 NA6 PNP
|
||||
description: Plug and Play board for the NA Miata/MX5 model years '89 through to early '95
|
||||
published: true
|
||||
date: 2021-01-31T04:02:56.074Z
|
||||
tags:
|
||||
editor: undefined
|
||||
date: 2022-04-04T08:06:06.514Z
|
||||
tags: boards
|
||||
editor: markdown
|
||||
dateCreated: 2020-01-06T01:53:34.029Z
|
||||
---
|
||||
|
||||
|
@ -100,3 +100,45 @@ The stock sensors can use preset calibrations within TunerStudio. The following
|
|||
**Stock inlet air sensor (IAT)** - RX-7_AFM(S5 in AFM)
|
||||
|
||||
![sensor_calibrations.PNG](/img/MX5/sensor_calibrations.PNG){.align-center width=420}
|
||||
|
||||
## Full pin number chart
|
||||
|
||||
Chart consist all pin numbers used in Speeduino Firmware for Miata / MX5 PNP boards. Pin numbers are Arduino Mega pin numbers. This chart can be used as a guide when setting unused default outputs for some other use.
|
||||
|
||||
| Pin name | Pin number | Description |
|
||||
|---------------------------|-----------------------|-----|
|
||||
| pinInjector1 | 11 | Output pin injector 1
|
||||
| pinInjector2 | 10 | Output pin injector 2
|
||||
| pinInjector3 | 9 | Output pin injector 3
|
||||
| pinInjector4 | 8 | Output pin injector 4
|
||||
| pinInjector5 | 14 | Output pin injector 5
|
||||
| pinCoil1 | 39 | Pin for coil 1
|
||||
| pinCoil2 | 41 | Pin for coil 2
|
||||
| pinCoil3 | 32 | Pin for coil 3
|
||||
| pinCoil4 | 33 | Pin for coil 4
|
||||
| pinCoil5 | 34 | Pin for coil 5 PLACEHOLDER value for now
|
||||
| pinTrigger | 19 | The CAS pin
|
||||
| pinTrigger2 | 18 | The Cam Sensor pin
|
||||
| pinTPS | A2;//TPS input pin
|
||||
| pinMAP | A5 | MAP sensor pin
|
||||
| pinIAT | A0 | IAT sensor pin
|
||||
| pinCLT | A1 | CLS sensor pin
|
||||
| pinO2 | A3 | O2 Sensor pin
|
||||
| pinBat | A4 | Battery reference voltage pin
|
||||
| pinDisplayReset | 48 | OLED reset pin
|
||||
| pinTachOut | 49 | Tacho output pin (Goes to ULN2803)
|
||||
| pinIdle1 | 2 | Single wire idle control
|
||||
| pinBoost | 4;
|
||||
| pinIdle2 | 4 | 2 wire idle control (Note this is shared with boost!!!)
|
||||
| pinFuelPump | 37 | Fuel pump output
|
||||
| Note that there is no stepper driver output on the PNP boards. These pins are unconnected and remain here just to prevent issues with random pin numbers occurring
|
||||
| pinStepperEnable | 15 | Enable pin for the DRV8825
|
||||
| pinStepperDir | 16 | Direction pin for DRV8825 driver
|
||||
| pinStepperStep | 17 | Step pin for DRV8825 driver
|
||||
| pinFan | 35 | Pin for the fan output
|
||||
| pinLaunch | 12 | Can be overwritten below
|
||||
| pinFlex | 3 | Flex sensor (Must be external interrupt enabled)
|
||||
| pinResetControl | 44 | Reset control output
|
||||
| pinVSS | 20 |
|
||||
| pinIdleUp | 48 |
|
||||
| pinCTPS | 47 |
|
Loading…
Reference in New Issue