mirror of https://github.com/speeduino/wiki.js.git
docs: update configuration/Staged_Injection
This commit is contained in:
parent
d9f13c57f2
commit
96e35fdf01
|
@ -2,9 +2,9 @@
|
|||
title: Staged Injection
|
||||
description: Configuring multi-stage fuel injection
|
||||
published: true
|
||||
date: 2022-03-21T03:10:39.010Z
|
||||
date: 2023-03-06T05:46:17.596Z
|
||||
tags:
|
||||
editor: undefined
|
||||
editor: markdown
|
||||
dateCreated: 2020-01-06T01:54:09.173Z
|
||||
---
|
||||
|
||||
|
@ -12,6 +12,17 @@ dateCreated: 2020-01-06T01:54:09.173Z
|
|||
## Overview
|
||||
Speeduino has the ability to control a secondary fuel stage for engines that have 2 sets of injectors, typically of different capacities. Whilst there are few stock engines that come with secondary injectors (the notable exception being many Mazda rotaries) secondary staged injection is a common modification, in particular used whenever large injectors are required, but where it is desirable to keep smaller injectors for smoother low RPM performance.
|
||||
|
||||
## Hardware Configuration
|
||||
The hardware configuration of the staging outputs depends greatly on the board in use, the engine itself and the fuel injector arrangement.
|
||||
|
||||
The table below outlines the number and channel configuration of the fuel channels required based on the cylinder count and fuel mode:
|
||||
|
||||
| | **1** | **2** | **3** | **4** | **5** | **6** | **8** |
|
||||
|----------------|---------------------------------|-------------------------------------|-----------------------------------------|---------------------------------------------|-----------------------------------------|-------------------------------------------|---------------------------------------------|
|
||||
| **Sequential** | **Min Inj#:** 2<br>**Pri:** 1<br>**Sec:** 2 | **Min Inj#:** 4<br>**Pri:** 1/2<br>**Sec:** 3/4 | **Min Inj#:** 6<br>**Pri:** 1/2/3<br>**Sec:** 4/5/6 | **Min Inj#:** 8<br>**Pri:** 1/2/3/4<br>**Sec:** 5/6/7/8 | **Min Inj#:** 6<br>**Pri:** 1/2/3/4/5<br>**Sec:** 6 | **Min Inj#:** 7<br>**Pri:** 1/2/3/4/5/6<br>**Sec:** 7 | N/A |
|
||||
| **Other** | As above | **Min Inj#:** 2<br>**Pri:** 1<br>**Sec:** 2 | **Min Inj#:** 4<br>**Pri:** 1/2/3<br>**Sec:** 4 | **Min Inj#:** 4<br>**Pri:** 1/2<br>**Sec:** 3/4 | As above | **Min Inj#:** 6<br>**Pri:** 1/2/3<br>**Sec:** 4/5/6 | **Min Inj#:** 8<br>**Pri:** 1/2/3/4<br>**Sec:** 5/6/7/8 |
|
||||
|
||||
|
||||
## Configuration
|
||||
No matter which control strategy is chosen, you must enter the sizing of the primary and secondary injectors in order to allow Speeduino to know the split in the overall fuelling.
|
||||
|
||||
|
|
Loading…
Reference in New Issue