From a61463222a46871fb0f0280e576355d65d1cdc4d Mon Sep 17 00:00:00 2001 From: Administrator Date: Thu, 19 Mar 2020 03:56:06 +0000 Subject: [PATCH] docs: update configuration/Nitrous_Control --- configuration/Nitrous_Control.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configuration/Nitrous_Control.md b/configuration/Nitrous_Control.md index 26c4657..c269fe8 100644 --- a/configuration/Nitrous_Control.md +++ b/configuration/Nitrous_Control.md @@ -2,7 +2,7 @@ title: Nitrous Control description: published: true -date: 2020-03-19T02:44:21.875Z +date: 2020-03-19T03:56:03.494Z tags: n2o, nitrous, tuning --- @@ -10,8 +10,8 @@ tags: n2o, nitrous, tuning Speeduino contains a 2 step nitrous control system for controlling valves and making fueling adjustments for dry setups. The 2 stages operate independantly and can overlap (ie both run at the same time) if needed. - ![nitrous_settings.png](/img/accessories/nitrous_settings.png){.align-center width=450} + ## Activation Settings - **Nitrous Mode:** Whether 1 or 2 stages will be used - **Arming Pin:** The Arduino Pin to be used for arming the nitrous control. @@ -20,7 +20,9 @@ The 2 stages operate independantly and can overlap (ie both run at the same time - **Minimum TPS:** The minimum TPS that the stage will activate at - **Maximum MAP:** A protection to ensure that the nitrous will not activate above a certain level of boost - **Leanest AFR:** Nitrous will only activate if the AFR is (And remains) below this value + ## Stage Settings + The settings for each stage are identical and allow for the 2 stages to run individually or joinly overlapping during a given RPM window. - **Nitrous output Pin:** The (Arduino) pin that will be driven high when the stage is active.