mirror of https://github.com/speeduino/wiki.js.git
docs: update boards/V03
This commit is contained in:
parent
7dc4fbec3c
commit
ad3c4fc187
|
@ -2,7 +2,7 @@
|
|||
title: V0.3 Board
|
||||
description: Usage and details of the v0.3 series of boards
|
||||
published: true
|
||||
date: 2022-04-04T07:45:08.102Z
|
||||
date: 2022-04-04T07:54:13.341Z
|
||||
tags:
|
||||
editor: markdown
|
||||
dateCreated: 2020-01-06T01:53:42.683Z
|
||||
|
@ -130,3 +130,43 @@ To make this simpler, the most common sensor types and their required configurat
|
|||
| V0.3.1 | Moved MAP sensor closer to edge of board. Beefier routing on the high current outputs (Including injectors) | [Download](https://github.com/speeduino/Hardware/blob/main/v0.3/Prior%20versions/v0.3.1/v0.3.1_bom.xlsx) |
|
||||
| V0.3 | Initial release | [Download](https://github.com/speeduino/Hardware/blob/main/v0.3/Prior%20versions/v0.3.0/v0.3_bom.xlsx) |
|
||||
|
||||
## Full pin number chart
|
||||
|
||||
Chart consist all pin numbers used in Speeduino Firmware for v0.3 boards. Pin numbers are Arduino Mega pin numbers. Not IDC pin numbers. This chart can be used as a guide when setting unused default outputs for some other use.
|
||||
|
||||
| Pin name | Pin number | Description |
|
||||
|---------------------------|-----------------------|-----|
|
||||
| pinInjector1 | 8 | Output pin injector 1
|
||||
| pinInjector2 | 9 | Output pin injector 2
|
||||
| pinInjector3 | 10 | Output pin injector 3
|
||||
| pinInjector4 | 11 | Output pin injector 4
|
||||
| pinInjector5 | 12 | Output pin injector 5
|
||||
| pinCoil1 | 28 | Pin for coil 1
|
||||
| pinCoil2 | 24 | Pin for coil 2
|
||||
| pinCoil3 | 40 | Pin for coil 3
|
||||
| pinCoil4 | 36 | Pin for coil 4
|
||||
| pinCoil5 | 34 | Pin for coil 5 (PLACEHOLDER)
|
||||
| pinTrigger | 19 | The CAS pin
|
||||
| pinTrigger2 | 18 | The Cam Sensor pin
|
||||
| pinTrigger3 | 3 | The Cam sensor 2 pin (VVT2 input pin)
|
||||
| pinTPS | A2 | TPS input pin
|
||||
| pinMAP | A3 | MAP sensor pin
|
||||
| pinIAT | A0 | IAT sensor pin
|
||||
| pinCLT | A1 | CLS sensor pin
|
||||
| pinO2 | A8 | O2 Sensor pin
|
||||
| pinBat | A4 | Battery reference voltage pin
|
||||
| pinDisplayReset | 48 | OLED reset pin
|
||||
| pinTachOut | 49 | Tacho output pin
|
||||
| pinIdle1 | 5 | Single wire idle control
|
||||
| pinIdle2 | 53 | 2 wire idle control
|
||||
| pinBoost | 7 | Boost control
|
||||
| pinVVT_1 | 6 | Default VVT output
|
||||
| pinVVT_2 | 48 | Default VVT2 output
|
||||
| pinFuelPump | 4 | Fuel pump output
|
||||
| pinStepperDir | 16 | Direction pin for DRV8825 driver
|
||||
| pinStepperStep | 17 | Step pin for DRV8825 driver
|
||||
| pinStepperEnable | 26 | Enable pin for DRV8825
|
||||
| pinFan | A13 | Pin for the fan output
|
||||
| pinLaunch | 51 | Can be overwritten below
|
||||
| pinFlex | 2 | Flex sensor (Must be external interrupt enabled)
|
||||
| pinResetControl | 50 | Reset control output
|
Loading…
Reference in New Issue