mirror of https://github.com/speeduino/wiki.js.git
docs: update configuration/Programmable_Outputs
This commit is contained in:
parent
89617657ed
commit
b34026a948
|
@ -2,7 +2,7 @@
|
||||||
title: Programmable Outputs
|
title: Programmable Outputs
|
||||||
description:
|
description:
|
||||||
published: true
|
published: true
|
||||||
date: 2022-10-15T13:36:16.685Z
|
date: 2022-10-15T13:46:17.720Z
|
||||||
tags:
|
tags:
|
||||||
editor: markdown
|
editor: markdown
|
||||||
dateCreated: 2022-04-04T08:51:25.574Z
|
dateCreated: 2022-04-04T08:51:25.574Z
|
||||||
|
@ -18,7 +18,7 @@ Speeduino features 8 programmable (on/off) outputs that can be used for purposes
|
||||||
![programmable_outputs.jpg](/img/tuning/programmable_outputs.jpg){.align-center width=400}
|
![programmable_outputs.jpg](/img/tuning/programmable_outputs.jpg){.align-center width=400}
|
||||||
|
|
||||||
- **Select Rule number** - The programmable output number (1-8)
|
- **Select Rule number** - The programmable output number (1-8)
|
||||||
- **Output Pin Num** - Sets the output pin. Note that this is Arduino pin number. Not IDC or other ECU connector pin number. Select virtual to keep the rule result for cascade ruling. ***Requires power cycle***
|
- **Output Pin Num** - Sets the output pin. Note that this is Arduino pin number. Not IDC or other ECU connector pin number. Select virtual to keep the rule result for cascade ruling. *Since **FW 202207** is possible to use free injectors and/or ignition outputs. All pins number are validated at boot.* ***Requires power cycle***
|
||||||
- **Rule Alias** - This can be used to rename the output based on what it is controlling. This name will apear in log.
|
- **Rule Alias** - This can be used to rename the output based on what it is controlling. This name will apear in log.
|
||||||
- **Output Polarity** - Sets if the output pin goes low or high when output is active. `Active low` means that output gets grounded when it's active and `Active high` means that output goes to 5v when active. *This refers to arduino pin polarity, board output might be inverted.*
|
- **Output Polarity** - Sets if the output pin goes low or high when output is active. `Active low` means that output gets grounded when it's active and `Active high` means that output goes to 5v when active. *This refers to arduino pin polarity, board output might be inverted.*
|
||||||
- **Activation Delay(S)** - Sets how long the rule conditions need to stay active before the output is activated. Setting this to 0.0 makes the output to be active whenever conditions are met.
|
- **Activation Delay(S)** - Sets how long the rule conditions need to stay active before the output is activated. Setting this to 0.0 makes the output to be active whenever conditions are met.
|
||||||
|
|
Loading…
Reference in New Issue