mirror of https://github.com/speeduino/wiki.js.git
docs: update configuration/Reset_Control
This commit is contained in:
parent
c09d48c6b3
commit
ba55998af9
|
@ -2,9 +2,9 @@
|
||||||
title: Reset_Control
|
title: Reset_Control
|
||||||
description:
|
description:
|
||||||
published: true
|
published: true
|
||||||
date: 2021-01-20T12:47:42.614Z
|
date: 2022-04-01T12:08:00.648Z
|
||||||
tags:
|
tags:
|
||||||
editor: undefined
|
editor: markdown
|
||||||
dateCreated: 2020-01-06T01:54:04.493Z
|
dateCreated: 2020-01-06T01:54:04.493Z
|
||||||
---
|
---
|
||||||
|
|
||||||
|
@ -20,9 +20,7 @@ This feature will enable you to prevent that from happening.
|
||||||
Requirements
|
Requirements
|
||||||
------------
|
------------
|
||||||
|
|
||||||
Reset Control can be used as simply as setting some options and [connecting a wire](https://wiki.speeduino.com/en/configuration/Reset_Control#wiring "wikilink"). However, some options also require [updating the usb-serial bootloader](https://wiki.speeduino.com/en/configuration/Reset_Control#updating-the-bootloader "wikilink") on the ATmega16U2 chip (if the board has one).
|
Reset Control can be used as simply as setting some options and [connecting a wire](https://wiki.speeduino.com/en/configuration/Reset_Control#wiring "wikilink"). However, some options also require [updating the usb-serial bootloader](https://wiki.speeduino.com/en/configuration/Reset_Control#updating-the-bootloader "wikilink") on the ATmega16U2 chip (if the board has one). These also require that Advance reset control features are enabled in TS project properties.
|
||||||
|
|
||||||
(TODO more details)
|
|
||||||
|
|
||||||
Options
|
Options
|
||||||
-------
|
-------
|
||||||
|
@ -31,20 +29,10 @@ Options
|
||||||
|
|
||||||
The Speeduino firmware provides three options for preventing the Arduino from resetting *(**\*** indicates a [bootloader update](https://wiki.speeduino.com/en/configuration/Reset_Control#updating-the-bootloader "wikilink") is required)*:
|
The Speeduino firmware provides three options for preventing the Arduino from resetting *(**\*** indicates a [bootloader update](https://wiki.speeduino.com/en/configuration/Reset_Control#updating-the-bootloader "wikilink") is required)*:
|
||||||
|
|
||||||
- Prevent When Running
|
- **Disabled:** No reset control is enabled
|
||||||
- Disabled
|
- ***Prevent When Running:** As long as the engine is running, the Arduino will not automatically reset itself, because the control pin will be held high as long as the engine is running. It will only be possible to update the Speeduino firmware when the car is not running or the control pin is otherwise held low.
|
||||||
- No reset control is enabled
|
- ***Prevent Always:** The control pin is always held high. It will only be possible to update the Speeduino firmware if the control pin is held low by jumper, switch, or some other means.
|
||||||
- When the engine is running**\***
|
- **Serial Command:** Similar to "Prevent Always," except that no custom bootloader is required. The control pin will normally be held high. To update the Speeduino firmware, you will need to first send the character 'U' to it over the serial connection. This will let it know that an update is coming and it will reset itself upon receiving any more data.
|
||||||
- As long as the engine is running, the Arduino will not automatically reset itself.
|
|
||||||
- The Control Pin will be held high as long as the engine is running.
|
|
||||||
- It will only be possible to update the Speeduino firmware when the car is not running or the Control Pin is otherwise held low.
|
|
||||||
- Prevent Always**\***
|
|
||||||
- The Control Pin is always held high.
|
|
||||||
- It will only be possible to update the Speeduino firmware if the Control Pin is held low by jumper, switch, or some other means.
|
|
||||||
- Serial Command
|
|
||||||
- Similar to "Prevent Always," except that no custom bootloader is required.
|
|
||||||
- The Control Pin will normally be held high.
|
|
||||||
- To update the Speeduino firmware, you will need to first send the character 'U' to it over the serial connection. This will let it know that an update is coming and it will reset itself upon receiving any more data.
|
|
||||||
|
|
||||||
Wiring
|
Wiring
|
||||||
------
|
------
|
||||||
|
|
Loading…
Reference in New Issue