mirror of https://github.com/speeduino/wiki.js.git
docs: update boards/official/TurbineBear
This commit is contained in:
parent
3795d7bf0d
commit
eae16d5619
|
@ -2,9 +2,9 @@
|
|||
title: Turbine Bear
|
||||
description:
|
||||
published: true
|
||||
date: 2021-09-30T00:27:00.547Z
|
||||
date: 2024-06-21T08:39:30.620Z
|
||||
tags:
|
||||
editor: undefined
|
||||
editor: markdown
|
||||
dateCreated: 2021-08-25T01:57:06.706Z
|
||||
---
|
||||
|
||||
|
@ -64,7 +64,7 @@ The ECU uses 2x 24 pin Delphi Sicma connectors. The connectors are keyed and wil
|
|||
| A1 | Input | 5A | Switched 12v | Main power input. Connect to switched 12v power via 5A fuse |
|
||||
| A2 | Input | 15A | Power Ground | Connect to battery negative. |
|
||||
| A3 | Output | 80mA | Sensor reference | Used for sensors requiring a 5v reference (Eg TPS). **Do not use for powering offboard systems.** |
|
||||
| A4 | Input | N/A | Starter switch | Ground switching input to trigger the starter. Teensy pin 22 |
|
||||
| A4 | Input | N/A | Starter switch | Ground switching input to trigger the starter. <br/>**v0.2:** Teensy pin 22 <br/>**v1.0:** Teensy pin 34 |
|
||||
| A5 | Input | N/A | RPM 2 | Hall effect input for RPM2 (N2) |
|
||||
| A6 | Both | N/A | CAN L | CAN L connection |
|
||||
| A7 | Input | N/A | EGT 2- | **DO NOT USE ON V0.2 BOARD!** |
|
||||
|
@ -79,7 +79,7 @@ The ECU uses 2x 24 pin Delphi Sicma connectors. The connectors are keyed and wil
|
|||
| B8 | Input | N/A | Kill Switch | Ground switching input to kill engine. Teensy pin A15/D34 |
|
||||
| C1 | Output | N/A | Analog ground | Ground reference for use by sensors such as TPS, IAT, CLT. **Do not use for powering offboard controllers** |
|
||||
| C2 | Input | N/A | CDP Sensor | 0-5v signal line from CDP transducer |
|
||||
| C3 | Input | N/A | Fuel flow Sensor | Input for use with **0-5v** fuel flow sensor. Teensy pin A18 |
|
||||
| C3 | Input | N/A | Fuel flow Sensor | Input for use with **0-5v** fuel flow sensor. <br/>**v0.2:** Teensy pin A18 <br/>**v1.0:** Teensy pin A17 |
|
||||
| C4 | Input | N/A | Inlet Air Sensor | Connect to one side of 2 wire inlet air temp sensor (IAT). Other side of sensor connected to pin C1 |
|
||||
| C5 | Input | N/A | Coolant Sensor | Connect to one side of 2 wire coolant sensor (CLT). Other side of sensor connected to pin C1 |
|
||||
| C6 | Input | N/A | EGT 1+ | **DO NOT USE ON V0.2 BOARD!** |
|
||||
|
|
Loading…
Reference in New Issue