speeduino
/
wiki.js
mirror of https://github.com/speeduino/wiki.js.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

docs: update configuration/Reset_Control

This commit is contained in:
pazi88 2022-04-01 12:59:52 +00:00 committed by Josh Stewart
parent 36c9ae1a60
commit f2884ef1fc
1 changed files with 3 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
configuration/Reset_Control.md
View File

@ -2,7 +2,7 @@
title: Reset_Control
description:
published: true
date: 2022-04-01T12:54:28.760Z
date: 2022-04-01T12:59:46.006Z
tags:
editor: markdown
dateCreated: 2020-01-06T01:54:04.493Z
@ -25,7 +25,8 @@ There are basically three ways to that can be used for reset control.
1. Some board versions have `Prog - Run` switch for reset control. When switch is set to `Prog`, the Arduino Mega board will reset normally and firmware upload is possible to do. When switch is set to `Run`, the Arduino Mega board will not reset and no firmware upload is possible. So in normal operation set the switch to `Run` and only use `Prog` -selection when updating firmware. This way doesn't require changes in TS.
![reset.jpg](/img/reset_control/reset.jpg){.align-center width=350}
2. For boards that don't have dedicated reset control -switch, it's possible to [connect a wire](https://wiki.speeduino.com/en/configuration/Reset_Control#wiring "wikilink") between reset pin and control pin in arduino.
3. If the Arduino Mega is version that has ATmega16U2 chip for USB-serial connection, it's possible to update the ATmega16U2 with custom firmware, [connect a wire](https://wiki.speeduino.com/en/configuration/Reset_Control#wiring "wikilink") from ATmega16U2 pin to control pin and enable the advanced reset control features in TS.
3. If the Arduino Mega is version that has ATmega16U2 chip for USB-serial connection, it's possible to [update the ATmega16U2 with custom firmware](https://wiki.speeduino.com/en/configuration/Reset_Control#updating-the-bootloader "wikilink"), [connect a wire](https://wiki.speeduino.com/en/configuration/Reset_Control#wiring "wikilink") from ATmega16U2 pin to control pin and enable the [Advanced Reset Control Features needs to be enabled in TS Project Properties](/en/Configuring_TunerStudio "wikilink")
Settings in Tuner Studio
-------