Configuring TunerStudio Project Properties
------------------------------------------

The menu option for the project properties page can be found here <img src="project_properties_select.jpg" title="fig:project_properties_select.jpg" alt="project_properties_select.jpg" width="400" />

Once opened this page will be seen. <img src="project_properties.jpg" title="fig:project_properties.jpg" alt="project_properties.jpg" width="350" />

Settings Tab
------------

### Temperature Display

Options are :

-   Fahrenheit(Default)
-   Celsius

### Fueling Algorithms

Options are :

-   Speed Density Fueling Algorithm (default)
-   Alpha-N Fueling Algorithm

### Enable_hardware_test

Default option is disabled. If Enabled an additional Tab will appear on the tuning page <img src="hardware_test_tab.jpg" title="fig:hardware_test_tab.jpg" alt="hardware_test_tab.jpg" width="200" /> Clicking on this will open further options <img src="hardware_test_output_option.jpg" title="fig:hardware_test_output_option.jpg" alt="hardware_test_output_option.jpg" width="200" />

-   Output Testing

[`Hardware` `test` `page`](Hardware_testing_page "wikilink")`.`

-   Input Testing

### CAN_COMMANDS

Default option is disabled

Can Devices Tab
---------------

<img src="can_devices_tab.jpg" title="can_devices_tab.jpg" alt="can_devices_tab.jpg" width="350" />