diff --git a/qa/rpc-tests/smartfees.py b/qa/rpc-tests/smartfees.py index c15c5fda0..ecfffc1b4 100755 --- a/qa/rpc-tests/smartfees.py +++ b/qa/rpc-tests/smartfees.py @@ -120,15 +120,26 @@ def check_estimates(node, fees_seen, max_invalid, print_estimates = True): last_e = e valid_estimate = False invalid_estimates = 0 - for e in all_estimates: + for i,e in enumerate(all_estimates): # estimate is for i+1 if e >= 0: valid_estimate = True + # estimatesmartfee should return the same result + assert_equal(node.estimatesmartfee(i+1)["feerate"], e) + else: invalid_estimates += 1 - # Once we're at a high enough confirmation count that we can give an estimate - # We should have estimates for all higher confirmation counts - if valid_estimate and e < 0: - raise AssertionError("Invalid estimate appears at higher confirm count than valid estimate") + + # estimatesmartfee should still be valid + approx_estimate = node.estimatesmartfee(i+1)["feerate"] + answer_found = node.estimatesmartfee(i+1)["blocks"] + assert(approx_estimate > 0) + assert(answer_found > i+1) + + # Once we're at a high enough confirmation count that we can give an estimate + # We should have estimates for all higher confirmation counts + if valid_estimate: + raise AssertionError("Invalid estimate appears at higher confirm count than valid estimate") + # Check on the expected number of different confirmation counts # that we might not have valid estimates for if invalid_estimates > max_invalid: @@ -184,13 +195,13 @@ class EstimateFeeTest(BitcoinTestFramework): # NOTE: the CreateNewBlock code starts counting block size at 1,000 bytes, # (17k is room enough for 110 or so transactions) self.nodes.append(start_node(1, self.options.tmpdir, - ["-blockprioritysize=1500", "-blockmaxsize=18000", + ["-blockprioritysize=1500", "-blockmaxsize=17000", "-maxorphantx=1000", "-relaypriority=0", "-debug=estimatefee"])) connect_nodes(self.nodes[1], 0) # Node2 is a stingy miner, that - # produces too small blocks (room for only 70 or so transactions) - node2args = ["-blockprioritysize=0", "-blockmaxsize=12000", "-maxorphantx=1000", "-relaypriority=0"] + # produces too small blocks (room for only 55 or so transactions) + node2args = ["-blockprioritysize=0", "-blockmaxsize=8000", "-maxorphantx=1000", "-relaypriority=0"] self.nodes.append(start_node(2, self.options.tmpdir, node2args)) connect_nodes(self.nodes[0], 2) @@ -229,22 +240,19 @@ class EstimateFeeTest(BitcoinTestFramework): self.fees_per_kb = [] self.memutxo = [] self.confutxo = self.txouts # Start with the set of confirmed txouts after splitting - print("Checking estimates for 1/2/3/6/15/25 blocks") - print("Creating transactions and mining them with a huge block size") - # Create transactions and mine 20 big blocks with node 0 such that the mempool is always emptied - self.transact_and_mine(30, self.nodes[0]) - check_estimates(self.nodes[1], self.fees_per_kb, 1) + print("Will output estimates for 1/2/3/6/15/25 blocks") - print("Creating transactions and mining them with a block size that can't keep up") - # Create transactions and mine 30 small blocks with node 2, but create txs faster than we can mine - self.transact_and_mine(20, self.nodes[2]) - check_estimates(self.nodes[1], self.fees_per_kb, 3) + for i in xrange(2): + print("Creating transactions and mining them with a block size that can't keep up") + # Create transactions and mine 10 small blocks with node 2, but create txs faster than we can mine + self.transact_and_mine(10, self.nodes[2]) + check_estimates(self.nodes[1], self.fees_per_kb, 14) - print("Creating transactions and mining them at a block size that is just big enough") - # Generate transactions while mining 40 more blocks, this time with node1 - # which mines blocks with capacity just above the rate that transactions are being created - self.transact_and_mine(40, self.nodes[1]) - check_estimates(self.nodes[1], self.fees_per_kb, 2) + print("Creating transactions and mining them at a block size that is just big enough") + # Generate transactions while mining 10 more blocks, this time with node1 + # which mines blocks with capacity just above the rate that transactions are being created + self.transact_and_mine(10, self.nodes[1]) + check_estimates(self.nodes[1], self.fees_per_kb, 2) # Finish by mining a normal-sized block: while len(self.nodes[1].getrawmempool()) > 0: diff --git a/src/rpcclient.cpp b/src/rpcclient.cpp index 343b6234d..cab581901 100644 --- a/src/rpcclient.cpp +++ b/src/rpcclient.cpp @@ -96,6 +96,8 @@ static const CRPCConvertParam vRPCConvertParams[] = { "getrawmempool", 0 }, { "estimatefee", 0 }, { "estimatepriority", 0 }, + { "estimatesmartfee", 0 }, + { "estimatesmartpriority", 0 }, { "prioritisetransaction", 1 }, { "prioritisetransaction", 2 }, { "setban", 2 }, diff --git a/src/rpcmining.cpp b/src/rpcmining.cpp index f42b31627..38f360922 100644 --- a/src/rpcmining.cpp +++ b/src/rpcmining.cpp @@ -726,3 +726,75 @@ UniValue estimatepriority(const UniValue& params, bool fHelp) return mempool.estimatePriority(nBlocks); } + +UniValue estimatesmartfee(const UniValue& params, bool fHelp) +{ + if (fHelp || params.size() != 1) + throw runtime_error( + "estimatesmartfee nblocks\n" + "\nWARNING: This interface is unstable and may disappear or change!\n" + "\nEstimates the approximate fee per kilobyte needed for a transaction to begin\n" + "confirmation within nblocks blocks if possible and return the number of blocks\n" + "for which the estimate is valid.\n" + "\nArguments:\n" + "1. nblocks (numeric)\n" + "\nResult:\n" + "{\n" + " \"feerate\" : x.x, (numeric) estimate fee-per-kilobyte (in BTC)\n" + " \"blocks\" : n (numeric) block number where estimate was found\n" + "}\n" + "\n" + "A negative value is returned if not enough transactions and blocks\n" + "have been observed to make an estimate for any number of blocks.\n" + "However it will not return a value below the mempool reject fee.\n" + "\nExample:\n" + + HelpExampleCli("estimatesmartfee", "6") + ); + + RPCTypeCheck(params, boost::assign::list_of(UniValue::VNUM)); + + int nBlocks = params[0].get_int(); + + UniValue result(UniValue::VOBJ); + int answerFound; + CFeeRate feeRate = mempool.estimateSmartFee(nBlocks, &answerFound); + result.push_back(Pair("feerate", feeRate == CFeeRate(0) ? -1.0 : ValueFromAmount(feeRate.GetFeePerK()))); + result.push_back(Pair("blocks", answerFound)); + return result; +} + +UniValue estimatesmartpriority(const UniValue& params, bool fHelp) +{ + if (fHelp || params.size() != 1) + throw runtime_error( + "estimatesmartpriority nblocks\n" + "\nWARNING: This interface is unstable and may disappear or change!\n" + "\nEstimates the approximate priority a zero-fee transaction needs to begin\n" + "confirmation within nblocks blocks if possible and return the number of blocks\n" + "for which the estimate is valid.\n" + "\nArguments:\n" + "1. nblocks (numeric)\n" + "\nResult:\n" + "{\n" + " \"priority\" : x.x, (numeric) estimated priority\n" + " \"blocks\" : n (numeric) block number where estimate was found\n" + "}\n" + "\n" + "A negative value is returned if not enough transactions and blocks\n" + "have been observed to make an estimate for any number of blocks.\n" + "However if the mempool reject fee is set it will return 1e9 * MAX_MONEY.\n" + "\nExample:\n" + + HelpExampleCli("estimatesmartpriority", "6") + ); + + RPCTypeCheck(params, boost::assign::list_of(UniValue::VNUM)); + + int nBlocks = params[0].get_int(); + + UniValue result(UniValue::VOBJ); + int answerFound; + double priority = mempool.estimateSmartPriority(nBlocks, &answerFound); + result.push_back(Pair("priority", priority)); + result.push_back(Pair("blocks", answerFound)); + return result; +} diff --git a/src/rpcserver.cpp b/src/rpcserver.cpp index 8bda5a037..83d2c2d50 100644 --- a/src/rpcserver.cpp +++ b/src/rpcserver.cpp @@ -319,6 +319,8 @@ static const CRPCCommand vRPCCommands[] = { "util", "verifymessage", &verifymessage, true }, { "util", "estimatefee", &estimatefee, true }, { "util", "estimatepriority", &estimatepriority, true }, + { "util", "estimatesmartfee", &estimatesmartfee, true }, + { "util", "estimatesmartpriority", &estimatesmartpriority, true }, /* Not shown in help */ { "hidden", "invalidateblock", &invalidateblock, true }, diff --git a/src/rpcserver.h b/src/rpcserver.h index dde8dfdcc..fc88f82be 100644 --- a/src/rpcserver.h +++ b/src/rpcserver.h @@ -193,6 +193,8 @@ extern UniValue getblocktemplate(const UniValue& params, bool fHelp); extern UniValue submitblock(const UniValue& params, bool fHelp); extern UniValue estimatefee(const UniValue& params, bool fHelp); extern UniValue estimatepriority(const UniValue& params, bool fHelp); +extern UniValue estimatesmartfee(const UniValue& params, bool fHelp); +extern UniValue estimatesmartpriority(const UniValue& params, bool fHelp); extern UniValue getnewaddress(const UniValue& params, bool fHelp); // in rpcwallet.cpp extern UniValue getaccountaddress(const UniValue& params, bool fHelp);