- For now I created `CompactBlockProcessorNG` where I started with
implementation of the state machine. I did it to not break the rest of
the SDK. This change will be merged to the feature branch. And before
it is merged to `main` branch code from `CompactBlockProcessorNG` will
be moved to `CompactBlockProcessor`.
- The new code is not used. It just shows and explains how it is done.
It is proof of concept.
- I did put either commented current code or comment to some places to
explain what should be done there.
- New important data types:
- `ActionContext` is context that can hold any data that needs to be
shared between actions. For example sync ranges or current state.
- `CBPState` is state of the `CompactBlockProcessor`. Each state is
handled by one action. This doesn't apply to terminal states like
`finished` or `failed`.
- `ActionProgress` is very similar to `CompactBlockProgress`.
Different actions reports progress differently and `ActionProgress`
represents this.
- `Action` is protocol that defines API of an action. It has one run
method that executes the code of the action
- CBP first creates actions for (almost) each state in `makeActions()`
method. Then the "magic" is done in `CompactBlockProcessorNG.run()` method.
Here is main loop which takes action for current state and execute it.
It's expected that action does it's work and then updates the context
with new state. And this happens until some terminal state
(`finished`, `failed`, `stopped`) is reached.
- After the transition to state machine API of the
`CompactBlockProcessor` should stay the same. No changes should be
required in `SDKSynchronizer`.
[#700] Add documentation for CompactBlockProcessor state machine
- plantuml tool is used to generate diagram.
[#1054] Add config to state machine CBP
Closes#1054
[#1043] Implement DownloadAction
Closes#1043
[#1049] Implement ValidateAction
Closes#1049
[#1050] Implement ValidateServerAction
Closes#1050
[#1056] Add constructors to state machine CBP
Closes#1056
[#1061] Add failure methods for state machine CBP
Closes#1061
[#1055] Implement retry timer to state machine CBP
Closes#1055
[#1057] Implement start for state machine CBP
Closes#1057
[#1058] Implement stop for state machine CBP
Closes#1058
[#1052] Implement AfterSyncHooksManager when using state machine CBP
Closes#1052
[#1060] Implement wipe for state machine CBP
Closes#1060
[#1059] Implement rewind for state machine CBP
Closes#1059
[#700] Add idle state to CBP state machine
This is required so the CBP can detect start of the sync process.
[#700] Implement sending of some events from CompactBlockProcessorNG
[#700] Implement progress reporting in state machine CBP
[#1045] Implement FetchUTXOsAction
- draft of the fetching
[#1045] Implement FetchUTXOsAction
- updated the way Actions communicate data back to the CBP
- used this mechanism to pass result of utxos fetch so it's passed to the SDKSynchronizer as an Event
[#1042] Implement ComputeSyncRangesAction
Closes#1042
[#700] Implement cache clearing when some actions fail
[#1043] Fix batch range computation in DownloadAction
[#1046] Implement SaplingParamsAction
- action for sapling param files finished
[#1048] Implement ScanDownloadedButUnscannedAction
- scan downloaded but unscanned blocks
[#1047] Implement ScanAction
- scan action with the proper ranges computed
[#1047] Implement ScanAction (#1085)
- fixed logger message
[#1044] Implement EnhanceAction
Closes#1044
[#1041] Implement ClearCacheAction
Closes#1041
[#1040] Implement ClearAlreadyScannedBlocksAction
Closes#1040
[#1039] Implement ChecksBeforeSyncAction
Closes#1039
[#700] Make CBP state machine work
[#1050] Implement ValidateServerAction
- broken tests commented out and tracked in the tickets
- new test for ValidateServerAction
[#1051] Update how progress is computed after switch to state machine
Closes#1051
- new proposal for the progress computation
- OverallProgress value is passed to the Synchronizer as a Float
- OverallProgress is a result of fetch, scan and enhance operations
- Order of actions no longer influences the computation
- Actions report partial updates, CompactBlockProgress actor holds current state and computes the OverallProgress
[#1049] Implement ValidateAction
- synchronizer offline tests updated so it compiles, review is requested in a different ticket
- ValidateAction tests added
- BlockValidator mock generated
[#1047] Implement ScanAction
- ScanAction tests
- refactor of validateAction -> validateServerAction
- generated few more mocks for the DI
[#1045] Implement FetchUTXOsAction
- FetchUTXOsAction tests
- UTXOFetcher mocks
[#1045] Implement FetchUTXOsAction
- enhanced with mocked values and more checks
[#1046] Implement SaplingParamsAction
- SaplingParamsAction tests
- added TODO for TestCoordinator reset()
- SaplingParametersHandler mock added
[#1046] Implement SaplingParamsAction
- SaplingParamsAction tests
- added TODO for TestCoordinator reset()
- SaplingParametersHandler mock added
[#1046] Implement SaplingParamsAction
- rebased so I get functionality of improved mock checks
- enhanced SaplingParamsAction tests
- enhanced ValidateAction tests
- enhanced ScanAction tests
[#1046] Implement SaplingParamsAction
- scanAction tests more checks added
[#1044] Implement EnhanceAction
- EnhanceAction tests focused on 2 different methods:
- decideWhatToDoNext covered separately, decisions where the state machine goes next
- run tests for different cases
- new mocks generated for enhacer
- some typos fixed
[#1044] Implement EnhanceAction (#1107)
- empty assert messages fixed
[#700] Get rid of ScanDownloadedButUnscannedAction
Before the state machine download and scan was called in one loop. And
processing range for one batch was same for both of them. Therefore
there was code which scanned downloaded but not scanned blocks.
But now download and scan are independent. So it is possible to remove
`ScanDownloadedButUnscannedAction`.
[#700] Make NetworkTests compilable
Some tests are disabled for now (list is in #1115). And `NetworkTests`
can be compiled and all the enabled tests work.
[#1043] Implement DownloadAction
- DownloadAction tests
- BlockDownloader mock
[#1043] Implement DownloadAction (#1110)
- support functions set to private
[#1039] Implement ChecksBeforeSyncAction
- ChecksBeforeSyncAction tests
- all support functions in Action tests are set to private
- let _ = -> _ = refactor
- CompactBlockRepository mock added
[#1040] Implement ClearAlreadyScannedBlocksAction
- Implement ClearAlreadyScannedBlocksAction tests
- CompactBlockRepository mock added
[#1041] Implement ClearCacheAction
- ClearCacheAction tests
- CompactBlockRepository mock added
[#1042] Implement ComputeSyncRangesAction
- ComputeSyncRangesAction tests
- fixed all tests after merge of latest SDK changes related InternalSyncProgress
- all actions marked as final class
[#1042] Implement ComputeSyncRangesAction (#1120)
- Custom LatestBlocksDataProviderMock removed from the project
[#1122] Implement FileManager protocol and dependency
- ZcashFileManager implemented
- MigrateLegacyCacheDBAction refactored to be dependent on ZcashFileManager
- ZcashFileManager mock added
[#1122] Implement FileManager protocol and dependency (#1124)
- code cleanup
[#1121] Implement MigrateLegacyCacheDBAction
- MigrateLegacyCacheDBAction tests WIP
- tests naming cleanup
[#1121] Implement MigrateLegacyCacheDBAction
- MigrateLegacyCacheDBAction tests finished
[#700] Fix DarksideTests
Closes#1102
Some tests that can't be compiled are disabled for now. List is in #1126.
This PR contains multiple fixes. Most of the fixes is done in the code.
Not in the tests. That is good news.
Fixes:
- `config` inside `CompactBlockProcessor` can be updated during the
tests. And it must be also updated inside the actions. So
`ConfigProvider` is added and it is wrapper for config that is passed
to any instance of `Action` and provides updated config.
- Fixed `EnhanceAction`. Now it should update all the blocks in the
enhance range even when the remaining count of blocks is lower than
1000.
- Fixed `fail()` and `validationFailed()`. These two were canceling
`syncTask`. But that stopped run loop in a bad way.
[#1129] Final check of all State Machine Action tests
- XTCAsset messages checked
- test naming checked and fixed
[#1126] Fix DarksideTests in state machine branch
Closes#1126
Fix offline tests
Closes#1098Closes#1095Closes#1094
Most of the tests is removed. Either the code that was tested doesn't
exists. Or now tests for state machine actions do this work.
[#1115] Fix NetworkTests in state machine branch
Closes#1115
[#700] Fix progress reporting
Some actions in the sync process may not run. For example there are no
transactions to enhance and therefore there is no enhance progress. And in
cases like this computation of final progress won't work properly.
So let's fake 100% progress at the end of the sync process.
Closes#1111
- `InternalSyncProgress` has now new disk storage implementation:
`InternalSyncProgressDiskStorage`.
- When then `UserDefaults` was used as disk storage there were no IO errors
to handle. But now the code in `InternalSyncProgressDiskStorage`
writes to files and reads from files. So there are errors to handle.
Because of this protocol `InternalSyncProgressStorage` changed a bit
and API of `InternalSyncProgress` changed a bit. Now all the functions
throws.
- It is possible to make progress storage IO errors silent but I think
that storing of the progress is very essential to the sync process. So
I think that when progress storage fails then the sync process should
fail.
- `Initializer` has new parameter `generalStorageURL`. It is directory
where `InternalSyncProgressDiskStorage` stores progress files. In
future this can be used for storing any data the SDK wants.
Closes#1012
- This is the first change for the dependency injection. This change
adds `DIContainer` which is used to register and resolve dependencies.
- Then this change shows how `DIContainer` can be used to resolve
dependencies. And it also shows how to mock dependencies in tests.
- Constructors of `Initializer` are changed to support mocking of
depedendencies. But it doesn't affect public API in any way.
- Depedencies are registered in `Dependencies.setup()`. Then in the code
`container.resolve(SomeType.self)` is called to get instance of the
dependency.
- `ZcashTestCase` class is added. It inherits from `XCTestCase` and
should be used for base class in tests. `ZcashTestCase` takes care of
creation of `DIContainer` for dependencies mocking. In future we can
maybe move there more things that are used in each test.
- Lot is missing here. Not all the code is using dependency injection.
Tests for `DIContainer` are missing. Only `OfflineTests` work now
(other tests can't be even compiled). It will be added in future
changes.
- `BlockDownloaderImpl` is changed. It now spawns detached Task to
download blocks. So blocks can be downloaded in parallel with scanning
process.
- `Synchronizer.stop()` is no longer async.
- Blocks cache cleaning is changed. It's not possible to drop the whole
cache now. There are some blocks pre-downloaded which weren't scanned
yet.
- attached to the processor's timer
- added latest scanned time and latest block height
- sample app showing the new values alongside with the %
- unit tests fixed
- latestBlock() API added
- the transaction repository is no longer used to update the exposed values during the syncing
Closes#888.
- `ZcashRustBackend` is actor now. So majority of methods in this actor
are now async.
- Some methods stayed `static` in `ZcashRustBackend`. It would be hard
to pass instance of the `ZcashRustBackend` to the places where these
methods are used in static manner. And it would change lot of APIs.
But it isn't problem from technical perspective because these methods
would be `nonisolated` otherwise.
- Methods `lastError()` and `getLastError()` in `ZcashRustBackend` are
now private. This makes sure that ther won't be aby race condition
between other methods and these two error methods.
- All the methods for which was `lastError()` used in code now throw
error. So `lastError()` is no longer needed outside of the
`ZcashRustBackend`.
- There are in the public API related to `DerivationTool`.
- `DerivationTool` now requires instance of the `ZcashRustBackend`. And
`ZcashRustBackend` isn't public type. So `DerivationTool` doesn't have
any public constructor now. It can be created only via
`Initializer.makeDerivationTool()` instance method.
- `deriveUnifiedSpendingKey()` and `deriveUnifiedFullViewingKey()` in
`DerivationTool` are now async. It is because these are using
`ZcashRustBackend` inside. `DerivationTool` offers alternative
(closure and combine) APIs. But downside is that there is no sync API
to dervie spending key or viewing key.
- Some methods of the `DerivationTool` are now static. These methods
don't use anything that requires instance of the `DerivationTool`
inside.
[#888] Use Sourcery to generate mocks
- I wrote mock for `Synchronizer` manually. And it's tedious and long
and boring work.
- Now `ZcashRustBackendWelding` is changed a lot so it means
`MockRustBackend` must be changed a lot. So I decided to introduce
`sourcery` to generate mocks from protocols so we don't have to do it
manually ever.
- To generate mocks go to `ZcashLightClientKit/Tests/TestUtils/Sourcery`
directory and run `generateMocks.sh` script.
- Your protocol must be mentioned in `AutoMockable.swift` file.
Generated mocks are in `AutoMockable.generated.swift` file.
[#888] Fix Offline tests
- Offline tests target now runs and tests are green.
- There is log of changes in tests. But logic is not changed.
- Updated `AutoMockable.stencil` so sourcery is able to generate mock as
actor when protocol is marked with: `// sourcery: mockActor`.
- Last few updates in `ZcashRustBackendWelding`. In previous PR `rewindCacheToHeight`
methods was overlooked and it didn't throw error.
- Removed `MockRustBackend` and using generated
`ZCashRustBackendWeldingMock` instead.
- Using generated `SynchronizerMock`.
[#888] Fix NetworkTests
- Changed a bit how rust backend mock is used in the tests. Introduced
`RustBackendMockHelper`. There are some state variables that must be
preserved within one instance of the mock. This helper does exactly
this. It keeps this state variables in the memory and helping mock to
work as expected.
[#888] Fix Darkside tests
Create ZcashKeyDeriving internal protocol
Use New DerivationTool that does not require RustBackend
Remove duplicated methods that had been copied over
[#888] Fix potentially broken tests
I broke the tests because I moved `testTempDirectory` from each
`TestCase` to the `Environment`. By this I caused that each tests uses
exactly same URL. Which is directly against purpose of
`testTempDirectory`.
So now each test calls this one and store it to local variable. So each
test has unique URL.
[#888] Add ability to mock nonisolated methods to AutoMockable.stencil
[#888] Add changelog and fix the documentation in ZcashRustBackendWelding
[#888] Rename derivation rust backend protocol and remove static methods
- Renamed `ZcashKeyDeriving` to `ZcashKeyDerivationBackendWelding`. So
the naming scheme is same as for `ZcashRustBackendWelding`.
- `ZcashKeyDerivationBackend` is now struct instead of enum.
- Methods in `ZcashKeyDerivationBackendWelding` (except one) are no
longer static. Because of this the respective methods in
`DerivationTool` aren't also static anymore.
- There was still some code inside the SDK related to NotificationCenter
and notifications. But notifications are no longer needed. So all this
code can go away.
Closes#469.
- Methods defined in `ZcashRustBackendWelding` protocol which are doing
some IO operations are now async.
- `Initializer` no longer have methods to get balance. Only
`Synchronizer` now have these methods. These methods are newly async.
And `Initilializer` doesn't have alternative APIs.
- There is lot of changes in tests but those are mostly adding `await`.
No logic is changed.
Closes#209.
[#845] Introduce ZcashSynchronizerAlias enum
Closes#845.
[#852] SDKSynchronizer using queues label based on the alias
Closes#852.
[#847] Remove posibility to use DatabaseStorageManager as singleton
Closes#847.
[#850] Remove synchronizerConnectionStateChanged notification
Closes#850.
[#855] Add check if the Alias is already used
Closes#855
- Added `UsedAliasesChecker` utility which is used to register aliases
that are in use.
- `prepare()` and `wipe()` methods now check if the current alias can't
be used and if not then `InitializerError.aliasAlreadyInUse` is
thrown/emitted.
- Some public methods that could cause harm if used with the Alias that
is already in use now throw `SynchronizerError.notPrepared`. Thanks to
this the client app is forced to call `prepare()` first. And
`prepare()` does check for the Alias.
- Added tests for new conditions.
[#849] Make InternalSyncProgress aware of the Alias
Closes#849.
[#853] Only instance with default Alias migrates legacy cache DB
Closes#853.
[#851] Apply the Alias to the URLs
Closes#851.
- `Initializer` now updates paths according to alias before paths are
used anywhere in the SDK.
- Paths update can fail. It would be incovenient for the client apps to
handle errors thrown from `Initiliazer` constructor. So the error is
then handled in `SDKSynchronizer.prepare()` or `SDKSynchronizer.wipe()`.
[#846] Stop using SDKMetrics as singleton (#862)
- metrics are not longer a singleton
- tests fixed
- metrics outside init of the synchronizer
[#848] Make logger aware of the alias
- logger is now an instance passed throughout the sdk instead of a static proxy
[#848] Make logger aware of the alias (#868)
- comments addressed
[#848] Make logger aware of the alias (#868)
- returning protocol back
Fix typos
[#856] Add possibility to test multiple synchronizers in the sample app
Closes#856.
- Added `alias` property to `Synchronizer`.
- Added `SyncBlocksListViewController` which provides UI to use multiple
synchronizers at once.
[#209] Add changelog
- Add changelog for #209.
- Overall improve readability of the rendered changelog. Tickets
references are now prefixed with `###` instead of `- `.
Fix compilation
This change introduces two new protocols: `ClosureSynchronizer` and
`CombineSynchronizer`. These two protocols define API that doesn't use
`async`. So the client can choose exactly which API it wants to use.
This change also introduces two new objects: `ClosureSDKSynchronizer`
and `CombineSDKSynchronizer`. These two implement the respective protocols
mentioned above. Both are structures. Neither of these two keeps any state.
Thanks to this each is very cheap to create. And usage of these two isn't
mutually exclusive. So devs can really choose the best SDK API for each
part of the client app.
[#831] Use async inside of the SDKSynchronizer
- In general lot of methods inside the `SDKSynchronizer` and
`CompactBlockProcessoer` which weren't async are now async. And other
changes are made because of this change.
- `CompactBlockProcessor` no longer uses Combine to communicate with
`SDKSynchronizer`. Reason for this is that Combine doesn't play great
with async. Closure passed to `sink` isn't async.
- Because of this and because of how our tests work (receiving signals
from CBP directly) `CompactBlockProcessor` must be able to handle more
event closures. Not just one. So it now has `eventClosures`
dictionary. It's little bit strange but it works fine.
- `SyncStatus` inside the `SDKSynchronizer` was previously protected by
lock. Now it's protected by simple actor wrapper.
- Changes in tests are minimal. Changes were mady only because
`CompactBlockProcessor` changes from Combine to closures.
[#831] Add tests for ClosureSDKSynchronizer
- Added tests are testing in general if the `ClosuresSDKSynchronizer` is correctly
calling `Synchronizer` and if the values are correctly returned.
- `ClosuresSDKSynchronizer` doesn't contain any logic but it is public
API and we should be sure that it works correctly.
[#831] Add tests for CombineSDKSynchronizer
[#831] Add changelog
Closes#826
- `viewingKeys` and `walletBirthday` are removed from `Initializer`
constuctor. These parameters are moved to `SDKSynchronizer.prepare`
function.
- Constructor of the `SDKSynchronizer` no longer throws exception.
- Any value emitted from `lastState` stream before `SDKSynchronizer.prepare`
is called has `latestScannedHeight` set to 0.
- `Initializer.initialize` function isn't public anymore. To initialize
SDK call `SDKSynchronizer.prepare` instead.
- Real birthday is now known after the `SDKSynchronizer.prepare` is
called. But this function isn't async and therefore it's hard to
pass birthday from here to `CompactBlockProcessor` in synchronous
manner. We must be sure that it's safe to call start() after prepare
function finishes.
For this reason `CompactBlockProcessor` has `walletBirthdayProvider`
instead of `walletBirthday`. And this new parameter is closure which
reads birthday from `Initiliazer` on each call. Thanks to this
`CompactBlockProcessor` has always the right birthday.
- Some cleanup is done in `TestCoordinator`.
contains no public API changes.
Adds `func shouldClearBlockCacheAndUpdateInternalState() -> BlockHeight?` to `SyncRanges`
so that the compact block processor can advert internal states that are not consistent and
recover from such state.
Closes#821
Closes#795
- Added structure `SaplingParamsSourceURL` which holds source URLs for
sapling-spend file and sapling-output file. URLs are ultimately passed
to `SaplingParameterDownloader`.
- This is done so it's possible to pass different URLs when running
tests.
- sapling-spend file and sapling-output file are in tests bundle. And
when running tests these files are loaded from bundle and not from
network.
Closes#778
- .swiftlint.yml is now used to lint only the code of the SDK.
- .swiftlint_tests.yml is now used to lint only the code of the tests.
This config disables rules that were previously disabled in the code
in lot of tests.
Closes#764
- All notification that were previously sent from CompactBlockProcessor are now gone.
- `CompactBlockProcessor` now provides `eventStream` to communicate with `SDKSynchronizer`.
- Added `synchronizerStoredUTXOs` notification.
- Tests are updated to not use notifications anymore. Some tests there
weren't working before are now fixed.
- Added `CompactBlockProcessorEventHandler` utility class. Previously
expectations were subscribing to notifications. This class replaces
this functionality. It subscribes to events from
`CompactBlockProcessor` and fullfill expectations.
Closes#771
- Renamed `cacheDirectory` param in `FSCompactBlockRepository`
constructor to `fsBlockDbRoot`.
- Pass same paths to `FSCompactBlockRepository` and `FSMetadataStore`
from tests.
Closes#746
- `LightWalletGRPCService` is no longer public. `LightWalletService` is no longer public.
- `LightWalletGRPCService` shouldn't be used dicrectly. Use `LightWalletServiceFactory` to create instance of the service.
- Moved sending of `blockProcessorConnectivityStateChanged` notification to `Initilizer`.
- All the errors from GRPC are mapped to `LightWalletServiceError`. Handling of `GRPCStatus` in the SDK is no longer required.
- `Service` directory (that contains GRPC code) is moved to `Modules/Service`. We can put more code to `Modules/` if we decide
to modularize more code.
Closes https://github.com/zcash/ZcashLightClientKit/issues/697
Closes https://github.com/zcash/ZcashLightClientKit/issues/720
Closes https://github.com/zcash/ZcashLightClientKit/issues/587
Closes https://github.com/zcash/ZcashLightClientKit/issues/667
Closes https://github.com/zcash/ZcashLightClientKit/issues/443
Closes https://github.com/zcash/ZcashLightClientKit/issues/754
- [#790] Fix ShieldFundsTests
Closes#790
Removes comments on `ShieldFundsTests` since those issues have been fixed
Depends on zcash-light-client-ffi changes that adopt newer versions of
librustzcash crates `zcash_primitives 0.10`, `zcash_client_backend 0.7`,
`zcash_proofs 0.10`, `zcash_client_sqlite 0.5.0`.
Also allows wallets to define a shielding_threshold and will set
foundations to customize minimum confirmations for balances, spends
and shielding operations.
**Test Bootstrapping**
- `ZcashCompactBlockDescriptor`: struct that holds functions to
describe blocks as filenames and compare those filenames
`ZcashCompactBlockDescriptor.live` has the actual implementation
but it can be replaced by mocks if needed on Tests
main implementations are held under `FSCompactBlockRepository.filenameDescription` and `FSCompactBlockRepository.filenameComparison` on a separate extention
`DirectoryListingProviders` provide two default implementations of listing a
directory deterministically. `FileManager` does not define a sorting and needs to be done in-memory by calling `.sorted()` on the resulting collection. If this
is a big toll on performance it can be changed to a POSIX implementation but
this is good for now.
`ZcashCompactBlockDescriptor` adds a `height` helper function to
turn a filename into the height of the block stored.
Implemented `func latestHeight() throws -> BlockHeight ` that
returns the blockheight by querying the cache directory in a sorted
fashion and getting the last value and turning the filename into a
`BlockHeight`
Added `Meta` struct to ZcashCompactBlock.
Tests implemented:
- `filterBlockFiles`
- `testClearTheCache`
- `testLatestHeightEmptyCacheThrows`
- `testLatestHeightEmptyCacheThrowsAsync`
- `testRewindEmptyCacheDoesNothing`
- `testRewindEmptyCacheDoesNothingAsync`
- `testWhenBlockIsStoredItFollowsTheDescribedFormat`
- `testWhenBlockIsStoredItFollowsTheFilenameConvention`
- `testGetLatestHeight`
- `testRewindDeletesTheRightBlocks` test
- `testPerformanceExample` test. This isn't a real performance test because the API doesn't work with async/await yet
adopts `shield_funds` shielding threshold parameter
Implements `initBlockMetadataDb` and fix tests
Renames dbCache parameter to `fsBlockDbRoot`. Builds but tests don't pass.
Removes cacheDb uses from code. Testing utilities still persist.
Added needed information in MIGRATING and CHANGELOG.
Added helper to perform deletion of legacy db and creation a the
new file system backed cache.
Renames parameters and changes code where needed.
Network Constants turned into `enum` with static methods.
DeletelastDownloadedBlock helper from initializer
Removes CompactBlockStorage and CompactBlockEntity.
Implements `latestCachedBlockHeight` on rustbackend.
*Replaces dependencies on ZcashRustWelding with `FSMetadataStore`*
This allows the tests to not depend in a particular implementation
of either the MockRustBackend of or ZcashRustBackend. Also provides
a way to test errors properly and switch implementations of critical
areas like `writeBlocks`.
Closes#657
- Now SDK downloads N downloads and scan those. And repeat until sync is
done. This safes lot of space of disk used to store downloaded blocks.
- Most changes are done in `CompactBlockProcessor.processNewBlocks`.
- `SyncRanges` structure is changed a bit.
- `SyncStatus` is changed. SDK now report that it's syncing with
progress. It doesn't report each phase of the sync process separately.
Also appropriate notifications were updated.
Address review comments
- Small changes
- Add tests to check computation of processing ranges for single loop
- Previously we had one range for each sync which was used for each
phase of sync process. Newly there is separate range for each phase of
the sync process.
- I added `InternalSyncProgress` utility. This utility tracks progress
of some phases. And it is able to compute right ranges which should be
used for syncing.
- Some unused download code from `CompactBlockProcessor` is removed.
Fix tests
Address review comments
- Rebase to master
- Update how range for `processBatchFinished()` is computed.
- Refactor `InternalSyncProgress`
- Add tests for `InternalSyncProgress`
Address review comments
Change how latest downloaded block is tracked
- Cache DB is no longer used to track which block was downloaded as
latest. `InternalSyncProgress` is used to do that.
- Thanks to that #660 is fixed. And cache DB can be completely removed
after sync process.
- Added sleep(1) to some darkside tests when latest block height is set.
Otherwise lightwalletd in darkside mode doesn't have time to setup and
tests are flaky.
Fix TransactionEnhancementTests.testBasicEnhancement test
Closes#614
fixes travis ci
Removed `setStartHeight` function
I’m going back in time and this setHeight is not something we are using anywhere else than in the prepare function. This comes from the times we had `initialize(seed:birthday) and we don’t have that anymore
See diff 246d10edaa (diff-414771774e10bc81260094ffcdc7b310a3be48758b2abd2bfae831c83912c02c)
The `func setStartHeight(_ startHeight: BlockHeight)` function assumes that
there might not be a wallet birthday set up or that it might be changed
in-flight which are things that are no longer happening.
remove test warning
Fix test compiler error
- Sample app refactored for the processor being an actor
- tests refactored as well
- dark side tests fixed
- utilities separated to new file
- synchronizer's start and stop are no longer in async context
- updating the UI for the scan fixed
This change removes responsibility for maintaining the state of
the wallet database from `ZcashLightClientKit` in favor of using
the migration system now provided by librustzcash. This will help
to ensure that the structure of the database is kept consistent with
the functions that query and update the database state.
Co-authored-by: Francisco Gindre <francisco.gindre@gmail.com>
this commit splits the batch sizes so that wallets can be tweaked to either scan or download more or less blocks depending of the CompactBlockProcessor.Config used. Defaults are provided
This also bumps up the default time out for GRPC services to 30 seconds to unary calls and 100 seconds to streaming calls
Also, adds some documentation formatting that won't hurt
PR Suggestions
PR Suggestions
Michal Fousek
Lukas Korba
Francisco Gindre
Francisco Gindre
Kris Nuttycombe
Daniel Haight