* Adds most_recent_by_ip field to address book
* adds test
* Apply suggestions from code review
* fixes lint
* Updates most_recent_by_ip in .take()
Updates should_update_most_recent_by_ip() and has_active_peer_with_ip to check last_attempt and last_failure times
Renames has_active_peer_with_ip
* Documents that Zebra will not initiate more than 1 outbound connections per IP
* Fixes is_ready_for_connection_attempt_with_ip
Adds test coverage for AttemptPending and Failed
Fixes new_outbound_peer_connections_are_rate_limited proptest
* Applies suggestions from code review.
* Applies suggestions from code review
* Always return true from `is_ready_for_connection_attempt_with_ip` if max_connections_per_ip != 0
* Update max_connections_per_ip config docs
* Warn about invalid config fields and use default values
* Ignores last_attempt and last_failure in is_ready_for_connection_attempt_with_ip
updates test
* Only update most_recent_by_ip if update.last_conn_state is responded.
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fixes lint
* Update zebra-network/src/address_book.rs
Co-authored-by: teor <teor@riseup.net>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Fix Rust syntax
* Fix whitespace
---------
Co-authored-by: teor <teor@riseup.net>
* Remove duplicate "running" message, send log file opening logs to stderr
* Add missing block progress bar desc, make them consistent
* Put progress bars in a specific order in each section
* Actually make block progress bar desc consistent
* Make progress bar order even more consistent
* Fix fork blocks plural for 1 block
* Use the correct number of chain fork bars
* Disable confusing partial work display
* Add struct field category comments
* Silence a verbose inventory log
* Activate production features on docs.rs
* Make version requirements more flexible to work around unpublished versions
* Remove a redundant feature requirement that causes publishing issues
* fix release auto-replacement format
* cargo release replace --verbose --execute --package zebrad
* Add a missing 1.0.1 changelog entry
* Fix incorrect commands in the release checklist
* Check the crates.io release script in CI, to avoid release failures
* Fix release date in changelog
* Fix workflow typo
* Add --no-confirm to the workflow
* Fix outdated version in release check command
* After the release, add a "remove do-not-merge" step
* Set git identity before committing
* Don't overwrite tweaked versions on upgrade
* cargo release version doesn't support --dependent-version
* Update the same commands in the release checklist
* Commit to git after each change
* And in the checklist
* Add cargo release config
* In CI, allow any branch and provide a fake previous tag name
* Remove redundant `cargo release commit`
* Use a simpler release version process
* Start simplifying the release dry run in CI
* Fix a cargo dependency lint
* just skip the failing crates for now
* Fix the release checklist to match CI
* Use the latest versions of all Zebra dependencies
* Update license description in README for MIT-only crates
* Draft changelog with trivial issues
* Remove trivial issues
* Update changelog entries as of commit 2a31972 and PR #7103
* Update mainnet and testnet checkpoints as of 2023-06-30
* chore: Release
* Estimate release height for Zebra v1.0.1
Block height 2139118 at 2023-06-30 01:55:38 UTC
Release is likely to be 2023-07-01
2139118 + 1152 * 3 = 2142574
Then round up to the nearest 1000.
* Stop busy-waiting in a Future for 45 seconds every minute
* Use the correct elapsed time calculation
* Add some TODOs for making the structure of the loop and wait times clearer
* Add methods for loading entire column families from the database
* Add a method that loads all the sprout trees from the database
* Add snapshot tests for sprout note commitment trees
* Add round-trip proptests for tree root database serialization
* Add a manual sprout note commitment tree database serialization snapshot test
* Add tests for 1,2,4,8 note commitments in a tree
* Remove redundant "rand" package rename in dependencies
* Randomly cache roots rather than only caching even roots
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* print a Zebra logo and some text in progress bar mode
* add network to printed line, add heart to logo
* print logo and message regardless of progress-bar; document how logo was generated
* Remove openssl dependency and prevent it coming back
* Put the arguments in the right place
* Put comment in the right place
* Add a default-docker feature to zebrad and use it in workflows and Docker files
* Fix a comment typo
* Make sure that Docker production builds don't use openssl
* Rename feature to default-release-binaries
* Use Arc::into_inner() to avoid potential concurrency issues
* Remove some outdated clippy lint workarounds (fixed in Rust 1.66)
* Update the required Rust version to 1.70
* Install from crates.io not git
* Move git instructions to install.md
* Add versions back to install.md
* Automate release replacements in Cargo.toml
* Re-add h4 to re-enable links to those sections
* Remove release replacements from zebra/Cargo.toml
* Add release replacements to zebrad/Cargo.toml
* Put the toml table in the right place
* Try another place in Cargo.toml
* Let's try again without "package."
* Remove duplicate release metadata from Cargo.toml
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* De-duplicate app_version and user_agent code, rename to build_version
* Make RPC testnet flag forward-compatible with additional testnets
* Fix RPC tests with new argument
* Use "modified" rather than "dirty" for uncommitted changes in build metadata
* Split the vergen version into its own function
* Add a missing timeout to outbound TCP connections
* Move inbound handshakes into their own function, replacing the manual span
* Delete a useless manual span in zebra_network::config
* Add an extra timeout to the spawned inbound handshake task
* Increase concurrency limit, reduce peer broadcast
* Fix a div_ceil() TODO
* Document security requirements of inbound peer overload handling
* Reduce drop probability and fix its formatting
* Put a 5 second timeout on inbound service requests
* Update drop probability tests
* Add error types, metrics, and logging for InboundTimeout errors
* fix: prevent progress bar from panicking using workaround
* remove more progress bar lengths
* re-add set_len() calls commented out; restore one that shouldn't cause panics
* Update zebra-state/src/service/non_finalized_state.rs
Co-authored-by: teor <teor@riseup.net>
---------
Co-authored-by: teor <teor@riseup.net>
* ignore client supplied content-type header and use json always
* rename method
* add one more check to test
* Add missing proptest-impl dependency from zebrad to zebra-rpc
* change to replace only specific content type
* remove cargo mods
* refactor `insert_or_replace_content_type_header`
* add security comments
* allow variants of text/plain ocntent_type
---------
Co-authored-by: teor <teor@riseup.net>
* change(crates): Publish tower-batch-control
* Cargo fields for zebra-test
* Cargo fields for tower-fallback
* Cargo fields for zebra-chain
* Cargo fields for zebra-consensus
* Cargo fields for zebra-network
* Cargo fields for zebra-node-services
* Cargo fields for zebra-rpc
* Cargo fields for zebra-script
* Cargo fields for zebra-state
* Cargo fields for zebrad
* Cargo fields for zebra-test
* Include zebra-test version and path for zebra-chain
* Include zebra-chain version and path for zebra-node-services
* Include zebra-chain version and path for zebra-script
* Include zebra-chain and zebra-test versions and paths for zebra-state
* Include zebra-* versions and paths for zebra-consensus
* Include zebra-* and tower-fallback versions and paths for tower-batch-control
* Include tower-* versions and paths for zebra-consensus
* Fixed tower-fallback license string
* Remove versions for dev-dependencise
* Update zebra-rpc/Cargo.toml
Co-authored-by: teor <teor@riseup.net>
* tower-batch-control license MUST remain MIT only
* Align zebra-network with upstream tower's MIT license
* Update zebra-test/Cargo.toml
Co-authored-by: teor <teor@riseup.net>
* Update zebra-utils/Cargo.toml
Co-authored-by: teor <teor@riseup.net>
* fix(legal): Use correct licenses for tower-batch-control and zebra-network (#6927)
* Don't modify whitespace
* Resolve rustdoc and cargo-release warnings
* Add missing zebra internal dependency versions
* Workaround missing zebra-utils test dependency in zebrad test-only feature
* Fix missing zebra internal dependency versions
* Add README, home page, and search terms to every crate
* Fix README publish warnings
* Change tower crates to beta versions
* Add zebra-utils to the list of allowed unused dependencies
* Update tower-batch-control/Cargo.toml
* Update tower-fallback/Cargo.toml
---------
Co-authored-by: teor <teor@riseup.net>
* Delete an unused CI job that was previously partially deleted
* Add 2 more jobs to the full sync test
* Increase Rust test time: current expected time is 60 hours
* Implement minor and patch database format versions
* Log and update database format versions when opening database
* Refactor the current list of column families into a constant
* Open all available column families, including from future Zebra versions
* Refactor note commitment tree lookups to go through the height methods
* Make Sapling/Orchard note commitment tree lookup forwards compatible
* Ignore errors reading column family lists from disk
* Update format version comments and TODOs
* Correctly log newly created database formats
* Fix a new cargo lint about resolver versions
* cargo clippy --fix --all-features --all-targets
* cargo fmt --all
* Add missing tokio feature in the state, revealed by the new resolver
* Add missing dev dependencies in zebra-node-services
* Add a missing `tokio` feature from PR #6813
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* updates Cargo.toml
* Migrate to abscissa 0.7.0
* Avoid panic from calling color_eyre::install twice
* Uses 'start' as the default subcommand
* updates default cmd logic
* Fixes minor cli issues
* removes outdated check in acceptance test
* Adds a test for process_cli_args, fixes version_args test.
Adds -V to process_cli_args match case
* Revert "fix(clippy): Silence future-incompat warnings until we upgrade Abscissa (#6024)"
This reverts commit dd90f79b48.
* Drops the worker guard to flush logs when zebra shuts down
* Adds cargo feature to clap
* restores process_cli_args
* updates deny.toml
* Updates EntryPoint help template
* Updates subcommand help msgs
* removes trailing whitespace, capitalizes sentences
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* revert parts of revert "Revert fix(clippy): Silence future-incompat warnings until we upgrade Abscissa"
* Applies suggestions from code review
* Moves EntryPoint to its own module
* fixes version_args test
* Updates changelog
* Prunes redundant test cases
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Revert "Prunes redundant test cases"
This reverts commit 3f73979184.
* Update zebrad/src/commands/entry_point.rs
Co-authored-by: teor <teor@riseup.net>
* Add missing import
* Updates `process_cli_args` to return a result
---------
Co-authored-by: teor <teor@riseup.net>
* Rewrite some state cache docs to clarify
* Add a zebra_network::Config.cache_dir for peer address caches
* Add new config test files and fix config test failure message
* Create some zebra-chain and zebra-network convenience functions
* Add methods for reading and writing the peer address cache
* Add cached disk peers to the initial peers list
* Add metrics and logging for loading and storing the peer cache
* Replace log of useless redacted peer IP addresses
* Limit the peer cache minimum and maximum size, don't write empty caches
* Add a cacheable_peers() method to the address book
* Add a peer disk cache updater task to the peer set tasks
* Document that the peer cache is shared by multiple instances unless configured otherwise
* Disable peer cache read/write in disconnected tests
* Make initial peer cache updater sleep shorter for tests
* Add unit tests for reading and writing the peer cache
* Update the task list in the start command docs
* Modify the existing persistent acceptance test to check for peer caches
* Update the peer cache directory when writing test configs
* Add a CacheDir type so the default config can be enabled, but tests can disable it
* Update tests to use the CacheDir config type
* Rename some CacheDir internals
* Add config file test cases for each kind of CacheDir config
* Panic if the config contains invalid socket addresses, rather than continuing
* Add a network directory to state cache directory contents tests
* Add new network.cache_dir config to the config parsing tests
* rename verifiers
* rename `PreparedBlock` to `SemanticallyVerifiedBlock`
* rename `CommitBlock` to `SemanticallyVerifiedBlock`
* rename `FinalizedBlock` to `CheckpointVerifiedBlock`
* rename `CommitFinalizedBlock` to `CommitCheckpointVerifiedBlock`
* rename `FinalizedWithTrees` to `ContextuallyVerifiedBlockWithTrees`
* rename `ContextuallyValidBlock` to `ContextuallyVerifiedBlock`
* change some `finalized` variables or function arguments to `checkpoint_verified`
* fix docs
* document the difference between `CheckpointVerifiedBlock` and `ContextuallyVerifiedBlock`
* fix doc links
* apply suggestions to request
Co-authored-by: Marek <mail@marek.onl>
* apply suggestions to service
Co-authored-by: Marek <mail@marek.onl>
* apply suggestions to finalized_state.rs and write.rs
Co-authored-by: Marek <mail@marek.onl>
* fmt
* change some more variable names
* change a few missing generics
* fix checkpoint log issue
* rename more `prepared` vars `semantically_verified`
* fix test regex
* fix test regex 2
---------
Co-authored-by: Marek <mail@marek.onl>
* Update MAX_TX_INV_IN_MESSAGE for ZIP-239 WTX IDs
* Combine multiple transaction updates into a single gossip & rate-limit gossips
* Rate-limit block gossips
* Fix mempool_transaction_expiration gossip test timings
* Enforce MAX_TX_INV_IN_MESSAGE in the network layer, rather than each service
* Fix documentation for `Message::Tx`
* Split MAX_INV_IN_RECEIVED_MESSAGE and MAX_TX_INV_IN_SENT_MESSAGE
* Fix log message typo
* Move some docs to/from another PR
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add a PeerSocketAddr type which hides its IP address, but shows the port
* Manually replace SocketAddr with PeerSocketAddr where needed
```sh
fastmod SocketAddr PeerSocketAddr zebra-network
```
* Add missing imports
* Make converting into PeerSocketAddr easier
* Fix some unused imports
* Add a canonical_peer_addr() function
* Fix connection handling for PeerSocketAddr
* Fix serialization for PeerSocketAddr
* Fix tests for PeerSocketAddr
* Remove some unused imports
* Fix address book listener handling
* Remove redundant imports and conversions
* Update outdated IPv4-mapped IPv6 address code
* Make addresses canonical when deserializing
* Stop logging peer addresses in RPC code
* Update zebrad tests with new PeerSocketAddr type
* Update zebra-rpc tests with new PeerSocketAddr type
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add extra vergen metadata to startup and panic reports
* Upgrade to vergen 8.1.3
* Update build script docs
* Upgrade env var names for vergen 8.1.3
* Switch to `git2` dependency feature
* Use renamed environmental variable for `git describe`
* Ignore vergen errors if `.git` doesn't exist
* Update Cargo.lock
* Remove unused deny.toml exceptions with --all-features
Some of these might be from this PR, or the missed dependency updates.
* add user agent as argument, use git to auto build zebra user agent
* try to fix test
* fix typo
* change expect text
* remove newline
* fix some docs
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* refuse to run Zebra if it is too old
* update the release checklist to consider the constants
* bring newline back
* apply new end of support code
* attempt to add tests (not working yet)
* move eos to progress task
* move tests
* add acceptance test (not working)
* fix tests
* change to block height checks (ugly code)
* change warn days
* refactor estimated blocks per day, etc
* move end of support code to its own task
* change test
* fix some docs
* move constants
* remove uneeded conversions
* downgrade tracing
* reduce end of support time, fix ci changing debugs to info again
* update instructions
* add failure messages
* cargo lock update
* unify releaase name constant
* change info msg
* clippy fixes
* add a block explorer
* ignore testnet in end of support task
* change panic to 16 weeks
* add some documentation about end of support
* Tweak docs wording
---------
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add extra test type modes to support zebra-checkpoints
* Add Mainnet and Testnet zebra-checkpoints test harnesses
* Add zebra-checkpoints to test docker images
* Add zebra-checkpoints test entrypoints
* Add Mainnet CI workflow for zebra-checkpoints
* Enable zebra-checkpoints feature in the test image
* Use the same features for (almost) all the docker tests
* Make workflow features match Docker features
* Add a feature note
* Add a zebra-checkpoints test feature to zebrad
* Remove the "no cached state" testnet code
* Log a startup message to standard error when launching zebra-checkpoints
* Rename tests to avoid partial name conflicts
* Fix log formatting
* Add sentry feature to experimental docker image build
* Explain what ENTRYPOINT_FEATURES is used for
* Use the correct zebra-checkpoints path
* Silence zebrad logs while generating checkpoints
* Fix zebra-checkpoints log handling
* Re-enable waiting for zebrad to fully sync
* Add documentation for how to run these tests individually
* Start generating checkpoints from the last compiled-in checkpoint
* Fix clippy lints
* Revert changes to TestType
* Wait for all the checkpoints before finishing
* Add more stderr debugging to zebra-checkpoints
* Fix an outdated module comment
* Add a workaround for zebra-checkpoints launch/run issues
* Use temp dir and log what it is
* Log extra metadata about the zebra-checkpoints binary
* Add note about unstable feature -Z bindeps
* Temporarily make the test run faster and with debug info
* Log the original test command name when showing stdout and stderr
* Try zebra-checkpoints in the system path first, then the cargo path
* Fix slow thread close bug in dual process test harness
* If the logs are shown, don't say they are hidden
* Run `zebra-checkpoints --help` to work out what's going on in CI
* Build `zebra-utils` binaries for `zebrad` integration tests
* Revert temporary debugging changes
* Revert changes that were moved to another PR
* Rename variables so it's clearer what they do
* Fully document zebra-checkpoints arguments
* Remove some outdated references to zcashd
* Add a json-conversion feature for converting JSON to valid Heights
* Simplify zebra-checkpoints code using conversion methods
* Track the last checkpoint height rather than the height gap
* Move all the CLI-specific code into a single function
* Remove cfg(feature) from the test RPC client API
* Move the RpcRequestClient into zebra-node-services
* Fix the case of RpcRequestClient
* Add transport and addr arguments to zebra-checkpoints
* Make zebra-checkpoints support both CLI and direct JSON-RPC connections
* Fix RpcRequestClient compilation
* Add a suggestion for zcashd authentication failures
* Document required features
* Handle differences in CLI & direct parameter and response formats
* Replace a custom function with an existing dependency function
* Add a checkpoint list test for minimum height gaps
* Silence an extremely verbose error in zebra-consensus tests
This disables around 10,000 logs like:
2023-04-18T02:46:28.441662Z WARN init{config=Config { checkpoint_sync: true, debug_skip_parameter_preload: false } network=Mainnet debug_skip_parameter_preload=true}: unexpected error: Closed in state request while verifying previous state checkpoints
* Increase the outbound connection interval to 100ms
* Start the inbound service as soon as possible, and the syncer last
* Increase acceptance test time limits to get more debug info
* Add more debug info to inbound service overload tracing messages
* Implement Display and to_string() for NetworkUpgrade
* Add a progress-bar feature to zebrad
* Add the progress bar writer to the tracing component
* Add a block progress bar transmitter
* Correctly shut down the progress bar, and shut it down on an interrupt
* Make it clearer that the progress task never exits
* Add a config for writing logs to a file
* Add a progress-bar feature to zebra-network
* Add a progress bar for the address book size
* Add progress bars for never attempted and failed peers
* Add an optional limit and label to connection counters
* Add open connection progress bars
* Improve CheckpointList API and CheckpointVerifier debugging
* Add checkpoint index and checkpoint queue progress bars
* Security: Limit the number of non-finalized chains tracked by Zebra
* Make some NonFinalizedState methods available with proptest-impl
* Add a non-finalized chain count progress bar
* Track the last fork height for newly forked chains
* Add a should_count_metrics to Chain
* Add a display method for PartialCumulativeWork
* Add a progress bar for each chain fork
* Add a NonFinalizedState::disable_metrics() method and switch to using it
* Move metrics out of Chain because we can't update Arc<Chain>
* Fix: consistently use best chain order when searching chains
* Track Chain progress bars in NonFinalizedState
* Display work as bits, not a multiple of the target difficulty
* Handle negative fork lengths by reporting "No fork"
* Correctly disable unused fork bars
* clippy: rewrite using `match _.cmp(_) { ... }`
* Initial mempool progress bar implementation
* Update Cargo.lock
* Add the actual transaction size as a description to the cost bar
* Only show mempool progress bars after first activation
* Add queued and rejected mempool progress bars
* Clarify cost note is actual size
* Add tracing.log_file config and progress-bar feature to zebrad docs
* Derive Clone for Chain
* Upgrade to howudoin 0.1.2 and remove some bug workarounds
* Directly call the debug formatter to Display a Network
Co-authored-by: Arya <aryasolhi@gmail.com>
* Rename the address count metric to num_addresses
Co-authored-by: Arya <aryasolhi@gmail.com>
* Simplify reverse checkpoint lookup
Co-authored-by: Arya <aryasolhi@gmail.com>
* Simplify progress bar shutdown code
Co-authored-by: Arya <aryasolhi@gmail.com>
* Remove unused MIN_TRANSPARENT_TX_MEMPOOL_SIZE
* Document that the progress task runs forever
* Fix progress log formatting
* If progress-bar is on, log to a file by default
* Create missing directories for log files
* Add file security docs for running Zebra with elevated permissions
* Document automatic log file, spell progress-bar correctly
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
* check last seen tip hash from mempool in fetch_mempool_transactions()
* Moves last_seen_tip_hash to ActiveState
* fixes tests and tests fixes
* continues to the next iteration of the loop to make fresh state and mempool requests if called with a long poll id
* Update zebra-rpc/src/methods/get_block_template_rpcs.rs
Co-authored-by: teor <teor@riseup.net>
* adds allow[unused_variable) for linter
* expects a chain tip when not(test)
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Addresses comments in code review
* - Removes second call to `last_tip_change()`
- Fixes tests using enabled mempool
* Adds note about chain tip action requirement to test method `enable()`
* updates doc comment
* Update zebrad/src/components/mempool.rs
Co-authored-by: teor <teor@riseup.net>
* fixes test
---------
Co-authored-by: teor <teor@riseup.net>
* Unify the `impl`s of `Sub` and `Add` for `Height`
* Adjust tests for `Height` subtraction
* Use `Height` instead of `i32`
* Use `block:Height` in RPC tests
* Use `let .. else` statement
Co-authored-by: Arya <aryasolhi@gmail.com>
* Update zebra-consensus/src/block/subsidy/general.rs
* Refactor the handling of height differences
* Remove a redundant comment
* Update zebrad/src/components/sync/progress.rs
Co-authored-by: Arya <aryasolhi@gmail.com>
* Update progress.rs
* impl TryFrom<u32> for Height
* Make some test assertions clearer
* Refactor estimate_up_to()
* Restore a comment that was accidentally removed
* Document when estimate_distance_to_network_chain_tip() returns None
* Change HeightDiff to i64 and make Height.sub(Height) return HeightDiff (no Option)
* Update chain tip estimates for HeightDiff i64
* Update subsidy for HeightDiff i64
* Fix some height calculation test edge cases
* Fix the funding stream interval calculation
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
Co-authored-by: teor <teor@riseup.net>
* Adds 'Contains' request in state, and:
- adds finalized block hashes to sent_blocks
- replaces Depth call with Contains in sync, inbound, and block verifier
* removes unnecessary From impl
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* updates references to Request::Contains
* Renames zs::response::BlockLocation to KnownBlocks
* Updates AlreadyInChain error
* update docs for sent_hashes.add_finalized
* Update zebra-consensus/src/block.rs
Co-authored-by: teor <teor@riseup.net>
* Update comment for `sent_blocks` field in state service
* update KnownBlock request to check the non-finalized state before responding that a block is in the queue
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* update references to renamed method
* Clear sent_blocks when there's a reset
* Move self.finalized_block_write_sender.is_none() to can_fork_chain_at
* revert changes related to checking queue
---------
Co-authored-by: teor <teor@riseup.net>
* build(deps): bump dirs from 4.0.0 to 5.0.0
Bumps [dirs](https://github.com/soc/dirs-rs) from 4.0.0 to 5.0.0.
- [Release notes](https://github.com/soc/dirs-rs/releases)
- [Commits](https://github.com/soc/dirs-rs/commits)
---
updated-dependencies:
- dependency-name: dirs
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
* Allow a different dirs-sys version used for a different purpose
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: teor <teor@riseup.net>
* add initial ES support
* hide elasticsearch behind feture, add config
* make the builds and clippy happy
* move ES code to a function
* change database name
* fix database name and panic
* increase close to tip interval
* update deny for elastic
* remove a block clone
* try to fix builds
* fix builds 2
* refactor some imports and unwraps
* typo
* change argument of elasticsearch function
* move elastic call to the end of `commit_finalized_direct`
* get height from block
* Combine transaction IDs that arrive close together rather than overwriting them
* Reduce the size of transaction ID gossip logs
* Limit the maximum number of times we wait for new changes before sending
* Make logs even shorter
* Expand correctness comment
* Remove trailing space
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Remove unused dependencies
* Check for newly unused dependencies in CI
* Use the correct grep command
* Always show cargo machete output
* Ignore cargo machete exit status, use grep instead
* Use if instead of && and subshells
* Invert if logic
* Mark Zebra coinbase transactions with extra coinbase data
* Log when we commit a block mined by Zebra to our state
* Reduce logging instrumentation during block writes
* Remove debug types in Zebra block log
* Add network and commit to write task logs
* Apply an allow-list before we log arbitrary user messages from blocks
* Rate-limit Zebra mined block logging to once every 1000 blocks
* Add mining configs for extra coinbase data and imitating zcashd, but don't use them yet
* Check CoinbaseData size limit when building transparent transactions
* Replace LIKE_ZCASHD constants with a config
* Take extra coinbase data from the configured string
* Update the zebrad configs in the tests with new config fields
* Allow missing docs directly on derived error types
* Make Request::BestChainBlockHash redirect to the ReadStateService
* Re-write the checkpoint_sync documentation based on the latest consensus rules
* Expose the underlying iterator for CheckpointList
* Validate existing state block hashes at startup, but ignore the result
* Monitor state block hash checkpoint task in the start command
* Fix indentation
* Make logging consistent
* Explain the config needed for full security
* Tidy required checkpoints docs, expand other docs
* Add security and deprecation changelog entries
* Replace task handle vector with a struct
* Add a test that this consensus-critical code actually runs and finishes
* Make some state methods and types available in tests
* Add missing docs
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* checks tip height before mempool insertions
* adds unit test for reverifying txs
* Adds TODO
* Adds correctness note
* dedup best_tip_height() calls
* Update zebrad/src/components/mempool.rs
Co-authored-by: teor <teor@riseup.net>
* uses Option for expected tip height
* removes misplaced dummy_call()
* calls wait_for_chain_tip without a timeout where it doesn't matter and skips instead of panicking where it doesn't
* Update zebrad/src/components/mempool/tests/vector.rs
* removes whitespace for rustfmt
---------
Co-authored-by: teor <teor@riseup.net>
* Stabilise the BestChainBlockHash state request
* Always include the block hash in the getblock RPC response
* Make the lightwalletd integration tests compatible with zcash/lightwalletd
* Update getblock RPC snapshots
* Return the correct missing block error code
* adds basic usage of long polling in gbt test
* adds !submit_old check before cancelling proposing a new template
* Removes break statement in long polling task
* Update zebrad/tests/common/rpc_client.rs
Co-authored-by: teor <teor@riseup.net>
* use blocking_send and watch channel
* fix "cannot block the current thread from within a runtime"
* Reduces interval between proposals and increases num proposals required.
* Runs rate-limiting sleeps in parallel to validation
* corrects comment.
---------
Co-authored-by: teor <teor@riseup.net>
* Revert "Temporarily fix the code for a disabled test"
This reverts commit d915624417cc946e53aac76449e0b5b719e03d2a.
* Check every valid time source in the proposal tests
* Activate block proposal tests in CI
* Repeats block proposal test a few times at an interval to sample different mempool contents
* Increase the number of templates tested to 10
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: arya2 <aryasolhi@gmail.com>
* bump v1.0.0-rc.4
* Add new mainnet and testnet checkpoints generated using zcashd
* make changes to changelog from review
* move item to new section
* change section name
---------
Co-authored-by: teor <teor@riseup.net>
* Implement the BestChainNextMedianTimePast state request
* Verify the lock times of mempool transactions
* Document that the mempool already handles lock time rejections correctly
* Fix existing tests
* Add new mempool lock time success and failure tests
* Revert "Update code that we're going to delete in the next PR anyway"
This reverts commit 1fed70da9e.
* Initial zcash-test-block-template script without block proposal construction
* Try creating block data using jq and printf
* Move proposal_block_from_template() to zebra-rpc and remove eyre dependency
* Implement FromStr for DateTime32 and Duration32
* Basic block-template-to-proposal command without time source handling
* Move block proposal code into its own module
* Use time source in block-template-to-proposal
* Make block-template-to-proposal require the getblocktemplate-rpcs feature
* Use block-template-to-proposal in the test script zcash-rpc-block-template-to-proposal
* Apply new hex formatting to commitments and nonces in block proposal tests
* Re-add missing imports from rebase
* Re-add missing conversions from rebase
* Update to new method name after rebase
* Derive a Default impl
* Restore a comment that was accidentally deleted during the rebase
* Avoid a clippy::unwrap-in-result
* Temporarily fix the code for a disabled test
* Fix tool build with Docker caches
* Make clippy happy with the temporary fix
* Give a pass/fail status for each proposal response
* Accept zcashd block templates in block-template-to-proposal
* Fix pretty printing
* Zebra expects a longpollid, so give it a dummy value
* Add "required" fields which Zebra requires
* Use curtime as the dummy maxtime in zcashd templates
* Support large block proposals by reading proposal data from a file
* Test all valid time modes for each proposal
* Allow the user to set the time command
* Put debug logs into their own files
* Exit with an error status when any proposal is invalid
* Log the date and time to make it easier to match errors to node logs
* Derive default using #[default]
* Implement PartialEq manually to satisfy clippy
* Allow a manual derive in test-only code
* Fix some missing docs warnings in the Docker build
* Format commitments and nonces as hex
* Format Sprout and Sapling nullifiers as hex when debugging
* Format Sprout commitments as hex when debugging
* Format redpallas keys as hex when debugging
* Update code that we're going to delete in the next PR anyway
* adds ValidateBlock request to state
* adds `Request` enum in block verifier
skips solution check for BlockProposal requests
calls CheckBlockValidity instead of Commit block for BlockProposal requests
* uses new Request in references to chain verifier
* adds getblocktemplate proposal mode response type
* makes getblocktemplate-rpcs feature in zebra-consensus select getblocktemplate-rpcs in zebra-state
* Adds PR review revisions
* adds info log in CheckBlockProposalValidity
* Reverts replacement of match statement
* adds `GetBlockTemplate::capabilities` fn
* conditions calling checkpoint verifier on !request.is_proposal
* updates references to validate_and_commit_non_finalized
* adds snapshot test, updates test vectors
* adds `should_count_metrics` to NonFinalizedState
* Returns an error from chain verifier for block proposal requests below checkpoint height
adds feature flags
* adds "proposal" to GET_BLOCK_TEMPLATE_CAPABILITIES_FIELD
* adds back block::Request to zebra-consensus lib
* updates snapshots
* Removes unnecessary network arg
* skips req in tracing intstrument for read state
* Moves out block proposal validation to its own fn
* corrects `difficulty_threshold_is_valid` docs
adds/fixes some comments, adds TODOs
general cleanup from a self-review.
* Update zebra-state/src/service.rs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update zebra-rpc/src/methods/get_block_template_rpcs.rs
Co-authored-by: teor <teor@riseup.net>
* check best chain tip
* Update zebra-state/src/service.rs
Co-authored-by: teor <teor@riseup.net>
* Applies cleanup suggestions from code review
* updates gbt acceptance test to make a block proposal
* fixes json parsing mistake
* adds retries
* returns reject reason if there are no retries left
* moves result deserialization to RPCRequestClient method, adds docs, moves jsonrpc_core to dev-dependencies
* moves sleep(EXPECTED_TX_TIME) out of loop
* updates/adds info logs in retry loop
* Revert "moves sleep(EXPECTED_TX_TIME) out of loop"
This reverts commit f7f0926f4050519687a79afc16656c3f345c004b.
* adds `allow(dead_code)`
* tests with curtime, mintime, & maxtime
* Fixes doc comment
* Logs error responses from chain_verifier CheckProposal requests
* Removes retry loop, adds num_txs log
* removes verbose info log
* sorts mempool_txs before generating merkle root
* Make imports conditional on a feature
* Disable new CI tests until bugs are fixed
* adds support for getpeerinfo RPC
* adds vector test
* Always passes address_book to RpcServer
* Update zebra-network/src/address_book.rs
Co-authored-by: teor <teor@riseup.net>
* Renames PeerObserver to AddressBookPeers
* adds getpeerinfo acceptance test
* Asserts that addresses parse into SocketAddr
* adds launches_lightwalletd field to TestType::LaunchWithEmptyState and uses it from the get_peer_info test
* renames peer_observer mod
* uses SocketAddr as `addr` field type in PeerInfo
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* adds ValidateBlock request to state
* adds `Request` enum in block verifier
skips solution check for BlockProposal requests
calls CheckBlockValidity instead of Commit block for BlockProposal requests
* uses new Request in references to chain verifier
* adds getblocktemplate proposal mode response type
* makes getblocktemplate-rpcs feature in zebra-consensus select getblocktemplate-rpcs in zebra-state
* Adds PR review revisions
* adds info log in CheckBlockProposalValidity
* Reverts replacement of match statement
* adds `GetBlockTemplate::capabilities` fn
* conditions calling checkpoint verifier on !request.is_proposal
* updates references to validate_and_commit_non_finalized
* adds snapshot test, updates test vectors
* adds `should_count_metrics` to NonFinalizedState
* Returns an error from chain verifier for block proposal requests below checkpoint height
adds feature flags
* adds "proposal" to GET_BLOCK_TEMPLATE_CAPABILITIES_FIELD
* adds back block::Request to zebra-consensus lib
* updates snapshots
* Removes unnecessary network arg
* skips req in tracing intstrument for read state
* Moves out block proposal validation to its own fn
* corrects `difficulty_threshold_is_valid` docs
adds/fixes some comments, adds TODOs
general cleanup from a self-review.
* Update zebra-state/src/service.rs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update zebra-rpc/src/methods/get_block_template_rpcs.rs
Co-authored-by: teor <teor@riseup.net>
* check best chain tip
* Update zebra-state/src/service.rs
Co-authored-by: teor <teor@riseup.net>
* Applies cleanup suggestions from code review
* updates gbt acceptance test to make a block proposal
* fixes json parsing mistake
* adds retries
* returns reject reason if there are no retries left
* moves result deserialization to RPCRequestClient method, adds docs, moves jsonrpc_core to dev-dependencies
* moves sleep(EXPECTED_TX_TIME) out of loop
* updates/adds info logs in retry loop
* Revert "moves sleep(EXPECTED_TX_TIME) out of loop"
This reverts commit f7f0926f4050519687a79afc16656c3f345c004b.
* adds `allow(dead_code)`
* tests with curtime, mintime, & maxtime
* Fixes doc comment
* Logs error responses from chain_verifier CheckProposal requests
* Removes retry loop, adds num_txs log
* removes verbose info log
* sorts mempool_txs before generating merkle root
* Make imports conditional on a feature
* Disable new CI tests until bugs are fixed
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* adds ValidateBlock request to state
* adds `Request` enum in block verifier
skips solution check for BlockProposal requests
calls CheckBlockValidity instead of Commit block for BlockProposal requests
* uses new Request in references to chain verifier
* adds getblocktemplate proposal mode response type
* makes getblocktemplate-rpcs feature in zebra-consensus select getblocktemplate-rpcs in zebra-state
* Adds PR review revisions
* adds info log in CheckBlockProposalValidity
* Reverts replacement of match statement
* adds `GetBlockTemplate::capabilities` fn
* conditions calling checkpoint verifier on !request.is_proposal
* updates references to validate_and_commit_non_finalized
* adds snapshot test, updates test vectors
* adds `should_count_metrics` to NonFinalizedState
* Returns an error from chain verifier for block proposal requests below checkpoint height
adds feature flags
* adds "proposal" to GET_BLOCK_TEMPLATE_CAPABILITIES_FIELD
* adds back block::Request to zebra-consensus lib
* updates snapshots
* Removes unnecessary network arg
* skips req in tracing intstrument for read state
* Moves out block proposal validation to its own fn
* corrects `difficulty_threshold_is_valid` docs
adds/fixes some comments, adds TODOs
general cleanup from a self-review.
* Update zebra-state/src/service.rs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update zebra-rpc/src/methods/get_block_template_rpcs.rs
Co-authored-by: teor <teor@riseup.net>
* check best chain tip
* Update zebra-state/src/service.rs
Co-authored-by: teor <teor@riseup.net>
* Applies cleanup suggestions from code review
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Changelog with trivial entries
* Delete trivial entries
* Summarise known issues in README, but don't change the list yet
* Add block timeouts to known issues
* Update the release template to add missing version files
* Bump crate versions
* Add the required Rust version to the release checklist
* Update the Rust version requirement to 1.65, Zebra now uses `let ... else ...`
* Update checkpoints
* Add checkpoints to the CHANGELOG
* Breaking Rust compiler version change
* Clarify the latest stable supported rust version
* Add some TODOs
* Move and rename height_from_signed_int()
* Move get_block_template() support functions to a submodule
* Fix incorrect P2SH comments and logs
* Split initial checks into their own functions
* Split state fetch into its own function, do some cleanup
* Move get_block_template_opts to get_block_template::parameters
* Fix and simplify test imports
* Rename block_height to next_block_height
* Rename to chain_tip_and_local_time to make it clear what it contains
* Split fetching mempool transactions out, include them in long poll id
* Refactor coinbase generation
* Split default root calculation into a separate function
* Use DateTime32 for getblocktemplate times
* Use typed difficulty fields rather than strings
* Split out a generate coinbase and roots function
* Move GetBlockTemplate construction into a method
* Document what happens to unusual difficulty values
* Clean up some TODOs
* fastmod check_address check_miner_address
* cargo fmt --all
* Fix an incorrect panic message
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move Drop from mempool::ActiveState to mempool::Downloads, to avoid bugs
* Re-verify mempool transactions after a fork
And add a marker struct for mempool download cancellation.
* Update README based on recent mitigations for some issues, tidy format
* Make mempool proptests easier to debug
* Make UnminedTx Display text much smaller
* Update tests for mempool transaction re-verification after forks
* Retry all stored and pending transactions
* Fix a test to check for mempool reset retries
* Declare support for long polling in the getblocktemplate RPC
* Add long polling input and ID structs
* Split out an update_checksum() function
* Implement LongPollId conversion to and from a string
* Use the LongPollId type in the RPC
* Add a longpollid field to the getblocktemplate parameters and responses, but don't use it yet
* Use multiple RPC threads with the getblocktemplate feature, to enable efficient long polling
* Update RPC snapshots
* Remove the "longpoll" capability, it's for miners, not nodes
* Use the long poll length constant in tests
* Update snapshots
* Remove the "long polling is not supported" error
* Fix minor compilation issues after the merge/rebase
* Expand long poll id comments
* Rename estimated height to local height, because that's what it actually is
* Add an invalid params test and fix the long poll id test
* Add modified config for config_tests
* Instrument all the config sub-tests
* Show the missing config file when the test fails
* Fix the generated config file
* Allow a clippy lint in tests
* Explain conversion from bytes to u32
* Remove a duplicate test case
* Remove verbose continuous_blockchain test logs
* Downgrade verbose zebra-network logs to debug
* Downgrade some state logs to debug during tests
* Mark were we would add always-on log filters, if we needed to
* Reduce the number of mempool property tests, to reduce logging
* Box errors to deal with large error warnings, add accessor methods for error properties
* Remove or explain some large enum variant lints
* Turn some tickets into TODOs
* Allow missing docs on single-field error enum variants
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move NoChainTip to a test-only module
* Move test-only ChainSyncStatus code into its own module
* Move RecentSyncLengths mocks to their own module
* Silence an unused test code lint
* Actually, NoChainTip is used in production for isolated connections
* Adds ignored jsonrequestobject argument
* adds docs
returns an error for unsupported options
* returns an error when longpollid is provided
* comments out capabilities enum and uses Vec<String> instead
* fixes spelling mistake
* uncomments GetBlockTemplateCapability enum and uses allow(dead_code) instead
* adds UnknownCapability
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* adds derived traits.
* removes unused [allow(dead_code)]
* test invalid params error for block data
* add capablity to gbt vectors test
* reverts passing in default options to getblocktemplate request in vectors test
* adds a jsonrequestobject with an unknown capability to gbt acceptance test
Co-authored-by: teor <teor@riseup.net>
* Remove a redundant sprout full sync job
* Add two new full sync jobs
* Allow the full sync test to run for 48 hours (estimated current time 40-45 hours)
* Split the conventional fee check into its own method
This will be used for block production and relaying
* Move getblocktemplate transaction selection into a new zip317 module
* Add a block_production_fee_weight field to VerifiedUnminedTx
* Add a custom Zebra minimum transaction weight for block production
* Implement ZIP-317 transaction selection for block production
* Split weighted index setup into its own function
* Split picking a transaction into its own function
* Re-apply: add acceptance test for getblocktemplate method in CI (#5653)
Revert "Revert "change(tests): add acceptance test for getblocktemplate method in CI (#5653)" (#5672)"
This reverts commit 6446e0ec1b.
* Fix incorrect MAX_CONTEXT_BLOCKS assertion in state
* Actually negate the miner fee for the RPC output
* Try the RPC again after waiting for transactions to verify
* Log before the test waits for the mempool to verify transactions
* Use the new ssh key secrets in CI
* updates comments
* adds check nullifier no dup fns for transactions
* Adds:
- check::anchors fn for tx iter
- TODO comments for unifying nullifiers and anchors checks
- new state request
Updates unknown anchor errors to accomodate tx-only check
Calls new state fn from transaction verifier
* updates check::anchors fns to use transactions
updates TransactionContextualValidity request to check sprout anchors
adds comment mentioning TransactionContextualValidity ignores UTXOs
* conditions new state req call on is_mempool
updates tests
* fix doc link / lint error
* checks for duplicate nullifiers with closures
* Update zebra-state/src/service/check/nullifier.rs
Co-authored-by: teor <teor@riseup.net>
* documents find_duplicate_nullifier params
moves if let statement into for loop
* renames new state req/res
* asserts correct response variant in tx verifier
* adds CheckBestChainTipShieldedSpends call in tx verifier to async checks
* re-adds tracing instrumentation to check::anchors fn
renames transaction_in_state to transaction_in_chain
* adds block/tx wrapper fns for anchors checks
* uses UnminedTx instead of transaction.hash()
deletes broken test
* updates new state req/res name
* updates tests and uses par_iter for anchors checks
* Updates check::anchors pub fn docs.
* Adds:
- comments / docs
- a TransactionError variant for ValidateContextError
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* moves downcast to From impl
rustfmt
* moves the ValidateContextError into an Arc
updates comments and naming
* leaves par_iter for another PR
* puts io::Error in an Arc
* updates anchors tests to call tx_anchors check
* updates tests to call tx_no_duplicates_in_chain
slightly improves formatting
* Update zebra-consensus/src/error.rs
Co-authored-by: teor <teor@riseup.net>
* moves Arc from HistoryError to ValidateContextError
Co-authored-by: teor <teor@riseup.net>
* Log zebrad config path as well as config values
* Remove duplicate config log
* Only log config path and data for server commands
* Use config ref instead
dependabot[bot]
teor
Arya
Alfredo Garcia
Conrado Gouvea
Deirdre Connolly
Marek