* Export the `zebra_state::Config::db_path` method
Make it easier for tests to discover the sub-directory used to store
the chain state data.
* Generate code for interfacing with lightwalletd
Use the `tonic-build` crate to generate Rust code for communicating with
lightwalletd using gRPC.
The `*.proto` files were obtained from the Zcash lightwalletd
repository.
* Use `block::Height` instead of `Height`
Import the `block` instead to make it slightly clearer.
* Add helper function to remove a file if it exists
Try to remove it and ignore an error if it says that the file doesn't
exist. This will be used later to remove the lock file from a copied
chain state directory.
* Add helper function to copy chain state dirs
Copy an existing chain state directory into a new temporary directory.
* Add a `BoxStateService` type alias
Make it easier to write and read a boxed version of a state service.
* Add a helper function to start the state service
Make it easier to specify the state service to use an existing state
cache directory.
* Import `eyre!` macro at the module level
Allow it to be used in different places without having to repeat the
imports.
* Add `load_tip_height_from_state_directory` helper
A function to discover the current chain tip height stored in a state
cache.
* Add helper function to prepare partial sync. state
Loads a partially synchronized cached state directory into a temporary
directory that can be used by a zebrad instance, and also returns the
chain tip block height of that state.
* Add `perform_full_sync_starting_from` helper
Runs a zebrad with an existing partially synchronized state, and
finishes synchronizing it to the network chain tip.
* Add function to load transactions from a block
Use a provided state service to load all transactions from a block at a
specified height.
The state service is a generic type parameter, because
`zebra_state::service::ReadStateService` is not exported publicly. Using
a generic type parameter also allows the service to be wrapped in layers
if needed in the future.
* Add `load_transactions_from_block_after` helper
A function to load transactions from a block stored in a cached state
directory. The cached state must be synchronized to a chain tip higher
than the requested height.
* Add helper function to load some test transactions
Given a partially synchronized chain state, it will extend that chain by
performing a full synchronization, and obtain some transactions from one
of the newly added blocks.
* Update `spawn_zebrad_for_rpc_without_initial_peers`
Wait until the mempool is activated.
* Add method to start lightwalletd with RPC server
Returns the lightwalletd instance and the port that it's listening for
RPC connections.
The instance can reuse an existing cached lightwalletd state if the
`LIGHTWALLETD_DATA_DIR` environment variable is set.
* Add a `LightwalletdRpcClient` type alias
To make it easier to identify the type generated from the Protobuf
files.
* Add helper function to connect to lightwalletd
Prepare an RPC client to send requests to a lightwalletd instance.
* Add a `prepare_send_transaction_request` helper
Creates a request message for lightwalletd to send a transaction.
* Add test to send transactions using lightwalletd
Obtain some valid transactions from future blocks and try to send them
to a lightwalletd instance connected to a zebrad instance that hasn't
seen those transactions yet. The transactions should be successfully
queued in Zebra's mempool.
* Make `zebra_directory` parameter generic
Allow using a `TempDir` or a `PathBuf`.
* Move lightwalletd protobuf files
Place them closer to the module directory, so that it's clearer that
they specify the RPC protocol for lightwalletd, and not Zebra itself.
* Don't use coinbase transactions in the test
Coinbase transactions are rejected by the mempool.
* Don't remove state lock file
It is removed automatically by Zebra when it shuts down, so if it exists
it should be reported as a bug.
* Force mempool to be enabled in Zebrad instance
Speed up the initialization of the Zebrad instance used for lightwalletd
to connect to.
* Refactor to create `LIGHTWALLETD_DATA_DIR_VAR`
Document how the environment variable can be used to speed up the test.
* Check for process errors in spawned Zebra instance
Enable checking for known process failure messages.
* Add `FINISH_PARTIAL_SYNC_TIMEOUT` constant
Document why it exists and how the choice of the value affects the test.
* Add `LIGHTWALLETD_TEST_TIMEOUT` constant
And use it for the Zebrad and the Lightwalletd instances used in the
send transaction integration test.
* Check `lightwalletd` process for errors
Enable checking the lightwalletd process for known failure messages.
* Update `tonic` and `prost` dependencies
Use the latest version and fix CI failures because `rustfmt` isn't
installed in the build environment.
* Create `send_transaction_test` module
Move the send transaction using lightwalletd test and its helper
functions into a new module.
* Move `LIGHTWALLETD_TEST_TIMEOUT` constant
Place it in the parent `lightwalletd` module.
* Move gRPC helper functions and types to `rpc` mod.
Make them more accessible so that they can be used by other tests.
* Create a `cached_state` module
Move the test utility functions related to using a cached Zebra state
into the module.
* Move `perform_full_sync_starting_from` to `sync`
Keep to closer to the synchronization utility functions.
* Move Zebra cached state path variable constant
Place it in the `cached_state` module.
* Skip test if `ZEBRA_TEST_LIGHTWALLETD` is not set
Make it part of the set of tests ignored as a whole if no lightwalletd
tests should be executed.
* Move `spawn_zebrad_for_rpc_without_initial_peers`
Place it in the `launch` sub-module.
* Rename `rpc` module into `wallet_grpc`
Avoid any potential misunderstandings when the name is seen out of
context.
* Allow duplicate `heck` dependency
At least until `structopt` is updated or `zebra-utils` is updated to use
`clap` 3.
* Fix a deny.toml typo
* fix(build): CMake is required by `prost` crate
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* Refactor instrumented records in `ChainTipSender`
Record the fields using a helper method. This reduces duplicate code and
prepares for removing the `active_value` field from the type, because
the replacement for it has to be atomically read to avoid a deadlock
when reading from the `watch::Sender` endpoint.
* Replace `active_value` field with sender borrow
Now that Tokio has been updated to a version in which `watch::Sender`
has a `borrow` method, we can remove the `active_value` field.
To prevent a deadlock like the one that happened with the synchronizer
some time ago, the method instrumentation was slightly refactored to
have the fields recorded in helper methods that avoid obtaining a
read-lock twice.
* Remove some `TODO` comments
They are resolved with the current changes.
* Refactor to avoid obtaining current `Span` twice
This is a minor optimization to remove an unnecessary second call to
`tracing::Span::current()`.
* Add a comment about preventing dead-locks
Explain why a binding can't be created for the old tip reference.
* Retry after log ssh failures in full sync test
Co-authored-by: teor <teor@riseup.net>
* implement display for `Script`
* implement `getaddressutxos`
* fix space
* normalize list of addresses as argument to rpc methods
* implement `AddressStrings`
* make a doc clearer
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add a finalized state txids query
* Add an address transaction IDs query, without height filters
* Connect the address transaction ID query to the RPC
* Basic filtering of address transaction IDs by height range
* Add a network and range argument to the getaddresstxids test
* Test all block range combinations for mainnet
* Fix a file descriptor limit error
* Optimise seeking the first transaction for an address
The first transaction's location is part of the address location.
* Filter finalized address transaction IDs by height range
* Filter non-finalized address transaction IDs by the height range
* Fix up snapshot tests for the new height range API
* Add `Amount::serialize_as_string` helper method
A helper method that makes it easier to serialize an `Amount` as a
string. This is needed for the response type of the `getaccountbalance`
RPC.
* Implement state service call for address balance
Add `Read{Request,Response}::AddressBalance` variants and implement the
handler that calls the query function.
* Create an `AddressBalance` response type
Only contains the `balance` field which is needed by `lightwalletd`.
That field is serialized as a string, following the RPC specification.
* Implement `get_address_balance` RPC
Query the read-only state service for the information, and wrap it in an
`AddressBalance` response type so that it is serialized correctly.
* Run `rustfmt` inside `proptest!` block
Fix some minor formatting details.
* Test `get_address_balance` with valid addresses
Check that the RPC leads to a query to the mocked state service for a
balance amount.
* Test `get_address_balance` with invalid addresses
An error message should be returned by the RPC.
* Rename metric to `address_balance`
Keep it consistent with how it's named in other places.
Co-authored-by: teor <teor@riseup.net>
* Revert "Add `Amount::serialize_as_string` helper method"
This reverts commit 01b432e3d2.
* Serialize amount as an integer
This is different from what the documentation says, but it's what
lightwalletd expects.
* Add reference to RPC documentation
Make sure it is linked to for easy access.
* Create an `AddressStrings` type
To be used as the input for the `get_address_balance` RPC method.
* Use `AddressStrings` in `get_address_balance` RPC
Fix the input parameter so that the list of address strings is placed
inside a JSON map.
* Update property tests to use `AddressStrings`
Make sure the proper input type is created.
Co-authored-by: teor <teor@riseup.net>
* Add address UTXOs query functions, but without the transaction IDs
* Return transaction IDs along with address UTXOs
* Add a convenience type for address UTXOs
* Add output addresses to the convenience method
* Fix query documentation
* Rename the chain transaction IDs method
* Update changelog for 1.0.0-beta.8
* Bump Zebra crate versions
The tower crates and their dependencies haven't changed,
so their versions don't need to be bumped.
Some Zebra crates haven't changed,
but I bumped all the versions to keep them consistent.
* Explicitly say that we support NU5 testnet 2
* Expand PR #3799 into changelog entries
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* update librustzcash; adapt to new API
* add ticket reference for removing zcash_proofs duplicated dependencies
* update to new zcash_script V5 API
* use zp_tx shorthand
* update to Zcash 4.7.0 dependencies
* update protocol versions
* feat(rpc): Implement `getblockchaininfo` RPC method (#3891)
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Make sync error logs more user-friendly (#3944)
- use info level, there is nothing the user needs to do,
particularly for a single error
- explain that the errors are temporary
- hide backtraces, because they look like crashes
* Update test.patch.yml with lightwalletd job (#3970)
* Update test.patch.yml with lightwalletd job
* Remove a workflow condition that will always be false
In general, patch workflows need the
opposite conditions to the original workflow.
But in this case, we know the result of the
condition will always be true, so we can just delete it.
Co-authored-by: teor <teor@riseup.net>
* fix(doc): Fix bugs in the lightwalletd database design (#3964)
* Re-order column families in design in dependency order
* Minor RFC design tweaks and fixes
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Repoint zebra image links to our new zfnd.org site for now (#3949)
* Repoint zebra image links to our new zfnd.org site for now
* Remove images/
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix typos (#3956)
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* bump database version to trigger testnet rollback
* reduce minimum protocol version for now (will be changed later)
* update dependencies
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* update versions to match zcash 4.7.0
* deny.toml: update 'darling'
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: Dimitris Apostolou <dimitris.apostolou@icloud.com>
* Make address index types consistent
* Simplify non-finalized address index updates
* Update snapshots for address index queries
* Simplify non-finalized UTXO query
* Add a query method for non-finalized address balance changes
* Add a query method for finalized state address balances
* Add a query function for address balances
* Refactor balance queries to make them repeatable
* Retry interrupted finalized balance queries
* Pop chain root blocks until it matches the finalized tip
* Avoid cloning the chain
It has already been cloned by the watch receiver
* Refactor and fix documentation of the balance query code
* implement `getaddresstxids` rpc method with dummy empty response
* use already public function
* fix some docs
* pass a list of addresses to the state request
* sync range errors with zcashd
* refactor a loop
* fix grammar
* fix tests
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: teor <teor@riseup.net>
* Add test-only serialization, and make existing serialization test-only
* Make AddressLocations clearer in the API
* Add UnspentOutputAddressLocation
* Add the AddressLocation to the UTXO database value
* Update the snapshot test code for UnspentOutputAddressLocation
* Update the raw data snapshots
* Update the high-level data snapshots
* Increment the database version
* Make serialization clearer
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix code formatting
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add an empty utxo_by_transparent_addr_loc column family
* Update snapshot data for the new column family
* Add an AddressUnspentOutputs type
* Add round-trip tests for AddressUnspentOutputs
* Move address balances into their own method
* Simplify updating address balances
* Fix utxo_by_out_loc column family name
* Implement reads and writes of address UTXOs
* Update raw data snapshots
* Update the snapshot tests for high-level address UTXOs
* Assert rather than taking empty address snapshots for genesis
* Update high-level address UTXO snapshot data, and delete empty snapshots
* Increment the database version
* Use typed values for all ReadDisk methods
* Implement test-only serialization for transparent::Address
* Implement FromDisk for ()
* Store AddressUnspentOutput as the column family key
* Update round-trip serialization tests for AddressUnspentOutput
* Update snapshot test code, and add a UTXO data snapshot
* Update existing snapshot data
* Add new UTXO snapshot data
* Update column family name
```sh
fastmod utxo_by_transparent_addr_loc utxo_loc_by_transparent_addr_loc zebra*
```
* cargo fmt --all
* cargo insta test --review --delete-unreferenced-snapshots
* Explain why it is ok to use invalid database iterator indexes
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add explanations of UTXO database updates
* Simplify an assertion
* Remove UnspentOutputAddressLocation and just store transparent::Output
* Update snapshot test data
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Derive Hash for transparent address index types
* Expose some types used by transparent address indexes
* Add an empty transparent transfers type for transparent address indexes
* Update TransparentTransfers with created UTXOs
* Add spent transparent outputs to ContextuallyValidBlock
* Update TransparentTransfers with spent transparent outputs
* Ignore missing spent outputs, so that tests pass
* Remove empty TransparentTransfers after a spend revert
* Update TransparentTransfers with creating and spending transaction IDs
* Ignore duplicate created UTXOs, so that tests pass
* Add some TODO comments
* Remove accidental doctest formatting
* Add address transfers index accessor methods
* Use TransactionLocation in the non-finalized state
* Apply more address index assertions to production code
* Refactor deeply nested code and apply more assertions
* Return UTXOs in chain order
* Return transaction hashes in chain order
* Stop indexing each transparent output multiple times
* Run some more asserts during tests
* Tidy TODO comments
* Fix an incorrect assert condition
* Use OrderedUtxos so that spent UTXOs can be stored in chain order
* Update tests to use OrderedUtxos
* Update the index API for the getaddressutxos query
* Remove redundant arguments in tests
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix(ci): correctly use lowered network caps
In the Test workflow we were using a different approach than the one being used in the Full sync test.
Also, in the Full sync test the variable was LOWER_NET_NAME, but NETWORK was being used in the disk name, with caps.
* imp(ci): get state version from local constants.rs
* imp(ci): use the same get name approach
* fix(ci): use the correct name for state version variable
* imp(ci)!: use different disk names for cached states
Disk states synced to canopy and synced to the chain tip should have different names to reference correctly on actual and coming tests the needed disk.
* imp(ci): test-stateful-sync no longer depends on regenerate-stateful-disks
* Apply suggestions from code review
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* fix(ci): use a better name for network string conversion
* Revert "Apply suggestions from code review"
This reverts commit cbbfaf4e9c.
* fix: do not get log information if sync was skipped
* fix(ci): do not lower the variable name
* fix(ci): use the same lowering case for network everywhere
* test: more .dockerignore conditions
* fix: use the right approach to lower caps
* remove extra .dockerignore
* trigger a change for stateful disk regeneration
* imp(ci): use `checkpoint` as the disk reference
* revert wrong delete
* fix(ci): add INSTANCE_ID and correct logging message
* imp(ci): add `v` prefix to state version number
* fix(ci): remove typo from logging message to get the height
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Add Utxo constructors from output locations
* Store transparent outputs rather than Utxo structs
* Update raw data snapshots
* Increment the state version
* Change OutputLocation to contain a TransactionLocation
* Change OutputLocation reads from the database
* Update some doc comments
* Update some TODOs
* Change deleting spent UTXOs and updating spent balances
* Change adding new UTXOs and adding their values to balances
* Disable dead code warnings
* Update snapshot test code
* Update round-trip tests for OutputLocations
* Update snapshot test data
* Increment the database format version
* Remove a redundant try_into()
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Refactor redundant code
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* ci: attempt at fixing 'Regenerate stateful disks'
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add an empty balance_by_transparent_addr column family
* Add an AddressBalanceLocation type for balance_by_transparent_addr
* Add serialization for balance_by_transparent_addr types
* Add round-trip tests for the new serialized types
* Add missing round-trip and serialized equality tests
* Add a network field to DiskWriteBatch
* Refactor confusing all_utxos_spent_by_block argument
It was actually just the UTXOs from the state spent by the block,
excluding the UTXOs created and spent within the block.
But now we need it to contain all the spent outputs,
including the ones created by the block.
* Read and update address balances in the finalized state
* Update raw data snapshots for transparent address balances
* Add test-only deserialization for transparent addresses
* Add high-level snapshot test code for address balances
* Add high-level snapshots for address balances
* Increment the state version after NU5 testnet 2 rollback
* Implement disk serialization for block headers and transactions
* Re-order column family initialization to match the design
* Add new empty transaction column families
* Split writing block header and transaction data
* Re-order column families for consistency
* Update write snapshots for transaction split
* Use split block and transaction data when reading
* Update snapshots to include genesis transaction hash location
* Filter all prefix iterators to make sure they return the correct values
* Test that the new transaction indexes are consistent
* Add some cleanup TODOs
* Increment the database format to version 15
* Remove unused fisk format impls for Block
* Add a missing prefix extractor for transaction locations
* Make the database generic over the thread mode
* Replace prefix iteration with iteration from a key, and a filter
Prefix iteration caused database hangs.
* Manually iterate through transaction locations to re-create blocks
Also:
- re-write disk read API to avoid iterator hangs
- move disk read API to ReadDisk
- re-write impl rocksdb::AsColumnFamilyRef to a where clause, for consistency
* Update the database version so it's larger than the NU5 testnet 2 version
* Update changelog for v1.0.0-beta.7
* Increment all crate versions
* Remove redundant release test that is now covered by CI
* Remove completed NU5 README check task from the release template
* Add Merge Freeze tool to the release checklist
* Simplify release checklist by removing unused steps
* Make proptest-impl features consistently depend on each other
* Use a non-test method for consensus checks
* Make proptest dependencies the same between crates
* Repoint zebra image links to our new zfnd.org site for now
* Remove images/
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Increment the database format version
* Update IntoDisk and FromDisk docs
* Rename fixed_byte_len to fixed_disk_byte_len
* Add functions that truncate and extend serialized bytes
* Store heights in 3 bytes on disk
* Update database raw data snapshots for 3-byte heights
* Log an error if we ever get close to the maximum disk height
* Store transaction indexes in 2 bytes on disk
* Update database raw data snapshots for 2-byte transaction indexes
* Make doc comment phrasing consistent
* Replace IntoDiskFixed with fixed constants
* Replace u32 byte length literal with a constant calculation
* Fix off-by-one error in MAX_ON_DISK_HEIGHT
* Add proptest seeds for the MAX_ON_DISK_HEIGHT off-by-one error
* Remove redundant module from a Height type
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add round-trip test for OutputLocation disk serialization
* Make the transaction snapshot tests more accurate
Previously, we were showing the genesis transaction hash at height 0, index 0.
But its hash is actually not stored by location in the database,
because the genesis transaction is skipped due to a consensus rule.
* Update the transaction snapshot data
* Add history tree snapshot tests
At the current test heights, the history trees are all empty.
* Add the history tree snapshot data
* Update comments
* Simplify snapshot test code
* Make some serde::Serialize impls test-only, so we can hex-encode them
This should also speed up release compilation a bit.
* Add snapshot test code for UTXOs
* Add snapshot data for UTXOs
* Split out ReadRequest and ReadResponse state service enums
* Simplify RPC test vectors
* Split state requests into Request and ReadRequest
* Make zebra-rpc use the new state ReadRequest
* Add request metrics to ReadStateService
Add a field to distinguish StateService and ReadStateService metrics.
Add missing StateService request metrics.
* Refactor state transaction lookup so it can be shared between services
* Implement ReadState Request::Transaction
* Revert "Drop the Chain watch channel lock before accessing the finalized state"
This reverts commit 8870944d13.
* Add a WatchReceiver wrapper that always clones the borrowed watch data
This avoids deadlocks, by holding the read lock for as short a time as possible.
* Drop the shared Arc<Chain>s as quickly as possible
This reduces memory usage.
* Make read::block more flexible, by accepting any AsRef<Chain>
* Make the block method docs consistent
* Avoid livelocks by explicitly dropping the borrow after the clone
* Use the read-only state service for RPCs
* Refactor non-finalized block lookup into Chain
* Implement the read-only state block request
* Drop the Chain watch channel lock before accessing the finalized state
* Query Sapling & Orchard trees by height in the finalized state
* Add Sapling & Orchard trees to the non-finalized state
* Add a TODO about concurrent read-only access to Sprout tree
Co-authored-by: teor <teor@riseup.net>
* Update the database format version
* Keep only the most recent Sprout tree in the database
* Check that the database returns empty trees for the genesis block
* Assert that the database returns the highest trees
* Document how to update insta snapshots
* Add note commitment tree insta snapshot tests
* Add comments about cached tree roots in snapshots
* Add snapshot data for sapling and orchard trees
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: teor <teor@riseup.net>
* Add state service module docs and cleanup
* Move and add finalized state methods
* Add chain and non-finalized state methods
* Cleanup methods and imports
* Create a ReadStateService type
* Add a stub service implementation
* Add a TODO
* Update ReadStateService request stubs with RPC names and tickets
* Documentation updates
* Make RPC State generic bounds accept a buffered state and a read-only state
* Doc updates
* Add missing proptest-impl feature in RPC dev dependencies
* Move the legacy chain check to the `check` module
And move `populated_state` to the `arbitrary` module.
* Cleanup imports
* Document the state service struct
* Split state block iter into its own module
* Prepare the finalized state for read-only state
* Add a forced shutdown mode, used in test code before forced exits
* Document the small database drop race condition window
* Move the legacy chain check to the `check` module
And move `populated_state` to the `arbitrary` module.
* Cleanup imports
* Document the state service struct
* Split state block iter into its own module
Janito Vaqueiro Ferreira Filho
Dimitris Apostolou
Alfredo Garcia
teor
Conrado Gouvea
Gustavo Valverde
dependabot[bot]
Deirdre Connolly
Marek