* Remove code that starts the scanner
* Update CHANGELOG
* Disable tests of the scanner
* Disable scanning tests in CI
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove general conditional compilation flags
See https://blog.rust-lang.org/2024/05/06/check-cfg.html
The conditional compilation flags for tor were superfluous as we can
make do fine with using only features.
* Update changelog
* Add `tokio_unstable` to to `unexpected_cfgs`
* Update changelog
* Fix `tokio_unstable` in `zebrad`
* Always set mempool.debug_enable_at_height to 0 on Regtest
* Adds a Regtest with Zebra page to the book
* Deduplicates calls to is_regtest() in start fn
* upgrade min rust version in zebrad
* Display full network name in logs except for Mainnet and default Testnet
* Add example logs/code to regtest section of the book
* apply some extra information
Co-authored-by: Arya <aryasolhi@gmail.com>
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Pili Guerra <mpguerra@users.noreply.github.com>
* Allow custom testnets to define more parameters and to make peer connections based on the initial_testnet_peer config field
* Updates latest stored test config
* Update zebra-network/src/config.rs
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: Marek <mail@marek.onl>
* Adds a `target_difficulty_limit` field on `testnet::Parameters`
* updates test to increment block nonce until finding a block that's below the difficulty threshold
* increment the nonce while the difficulty is invalid instead of while the difficulty threshold is invalid
* Adds comments
* moves network Magic type from zebra-network to zebra-chain
* Adds `network_magic` field to `testnet::Parameters` and uses the regtest network magic from zcashd
* Add a network magic config field for custom testnets
* Adds/updates tests
* Update zebra-chain/src/parameters/network/testnet.rs
* Adds a link to the Regtest network magic in zcashd
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Adds a `target_difficulty_limit` field on `testnet::Parameters`
* updates test to increment block nonce until finding a block that's below the difficulty threshold
* increment the nonce while the difficulty is invalid instead of while the difficulty threshold is invalid
* Adds comments
* Reduce the end of support time from 20 weeks to 16 weeks.
* Update release-process section of the book
* Adds changelog entry
* Update CHANGELOG.md
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Allow configurable Nu5 activation height on Regtest
* Fixes test
* removes outdated TODO
* Adds `current_with_activation_height()` method and uses it in `Commitment::from_bytes()`
* Enables parts of the internal miner for use on Regtest when the solution isn't checked
* Update internal miner config field docs
* Allow configurable Nu5 activation height on Regtest
* Fixes test
* removes outdated TODO
* Adds `current_with_activation_height()` method and uses it in `Commitment::from_bytes()`
* changelog and readme for 1.7.0 release
* chore: Release
* update zebra-scan and zebra-grpc to the release crates dry run script
* update ESTIMATED_RELEASE_HEIGHT
* update the release period to 6 weeks
* update release block
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* Always activate Canopy at Height(1) on Regtest
* Ignores the zip 212 grace period on configured Testnets and Regtest
* - Returns early when there is no Heartwood activation height when creating or updating HistoryTree
- Skips call to `check::legacy_chain()` when no NU5 activation height is set (it would return immediately anyway)
- Replaces `.map()` with `.filter_map()` in `NetworkUpgrade::target_spacings()`
- Removes outdated TODO
* - When proof of work is disabled, skips checking if Zebra is synced to the network tip in the getblocktemplate method
* Sets full_verifier_utxo_lookahead to Height::MIN instead of panicking
* When network is regtest, skips starting sync task and commits the genesis block if it's missing in the state
* updates/fixes test config
* Adds test for committing Canopy blocks on Regtest
* - Updates median time past and difficulty checks to use fewer than 11/17/28 blocks
* uses SLOW_START_INTERVAL of 0 if PoW is disabled, adds TODOs
* Update getblocktemplate method to return reserved chain history activation root hash, uses Nu5 at height 1
Test passes.
* Updates test to expect NU5 as the default nu activation at Height(1)
* Removes invalid difficulty snapshot
* fixes tests
* removes regtest NU5 activation height config field
* Apply suggestions from code review
* Update zebra-state/src/service/check/difficulty.rs
Co-authored-by: Marek <mail@marek.onl>
* Update zebra-state/src/service/check/difficulty.rs
* Updates docs/comments, renames an argument
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
* Adds `network_name` field and accessor method on `Parameters`, uses it in the `Display` impl for `Network`
* Removes unnecessary `.filter()`
* adds constraints on valid network names and a test
* adds config field for setting network name, adds "with_" prefix to ParameterBuilder setter methods
* Adds `MainnetKind`, `TestnetKind`, and `RegtestKind` to reserved network names
* updates stored test configs and fixes `network_name()` docs
* Adds a `new_regtest()` method on `Network` and `testnet::Parameters`, updates config deserialization to return an error if the initial_testnet_peers include any default initial peers AND contain configured activation heights
* Updates `activates_network_upgrades_correctly` test to check Regtest activation heights (and default Mainnet/Testnet)
* Refactors if-let & match statement into general match statement, removes constraint against including `testnet_parameters` field/section in the config when using `Mainnet` or `Regtest`
* Removes outdated TODO
* Restores `testnet_parameters` section of the latest stored config.
* Adds `with_sapling_hrps()` method and uses it to set the Regtest HRPs in `new_regtest()`.
Adds a test for Sapling HRP validation
* Checks that default Mainnet/Testnet/Regtest Sapling HRPs pass validation in `with_sapling_hrps()`
* Uses the correct constant in test
* Adds `is_regtest()` methods
* Adds genesis hash methods and fields to `testnet::Parameters` and its builder
* Copies Regtest genesis block from zcashd
* moves genesis hash check to Network.checkpoint_list()
* Checks the first line in the checkpoint list instead of the first item in the BTreeMap
* Checks that there is _some_ genesis block in the checkpoints list in `from_list()`, adds Regtest checkpoints (which only includes the genesis block)
* Adds a doc comment to `ParametersBuilder::default()`
* Adds a `disable_pow` field and skips checking proof of work if it's true
* Makes `equihash::Solution` an enum to support Regtest solutions, adds a test for validating and committing the Regtest genesis block
* use genesis_hash as first checkpoint when checkpoints are missing for configured testnets too
* Applies suggestions from code review.
* Reverts changes to `activation_height()` method
* Avoids panic in test
* Updates test docs
* drop custom panic hooks after expected panics
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
* Adds `network_name` field and accessor method on `Parameters`, uses it in the `Display` impl for `Network`
* Removes unnecessary `.filter()`
* adds constraints on valid network names and a test
* adds config field for setting network name, adds "with_" prefix to ParameterBuilder setter methods
* Adds `MainnetKind`, `TestnetKind`, and `RegtestKind` to reserved network names
* updates stored test configs and fixes `network_name()` docs
* Adds a `new_regtest()` method on `Network` and `testnet::Parameters`, updates config deserialization to return an error if the initial_testnet_peers include any default initial peers AND contain configured activation heights
* Updates `activates_network_upgrades_correctly` test to check Regtest activation heights (and default Mainnet/Testnet)
* Refactors if-let & match statement into general match statement, removes constraint against including `testnet_parameters` field/section in the config when using `Mainnet` or `Regtest`
* Removes outdated TODO
* Restores `testnet_parameters` section of the latest stored config.
* Adds `with_sapling_hrps()` method and uses it to set the Regtest HRPs in `new_regtest()`.
Adds a test for Sapling HRP validation
* Checks that default Mainnet/Testnet/Regtest Sapling HRPs pass validation in `with_sapling_hrps()`
* Uses the correct constant in test
* Adds `is_regtest()` methods
* Updates test docs
* drop custom panic hooks after expected panics
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
* Adds `network_name` field and accessor method on `Parameters`, uses it in the `Display` impl for `Network`
* Removes unnecessary `.filter()`
* adds constraints on valid network names and a test
* adds config field for setting network name, adds "with_" prefix to ParameterBuilder setter methods
* Adds `MainnetKind`, `TestnetKind`, and `RegtestKind` to reserved network names
* updates stored test configs and fixes `network_name()` docs
---------
Co-authored-by: Marek <mail@marek.onl>
* update zcash_script and zcash_primitives
* restore windows support
* add a windows config file
* try exact output from CI
* ignore config test in windows
* disable test for windows
* remove test for windows
* change zcash_script branch to release
* bump top the last zcash_script release version
* restore `rejection_restores_internal_state_genesis` test
* fix typo in test name and enable single thread on windows
* disable single thread
* Bump `chrono` from 0.4.34 to 0.4.38
* Stop using the deprecated `from_timestamp_opt`
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* fix beta imports and other warnings
* clippy lints beta
* move attributes to after docs
Co-authored-by: Marek <mail@marek.onl>
* move some code to test module
* implement display instead of direct tostring for LongPollId
Co-authored-by: Arya <aryasolhi@gmail.com>
* fix typo
---------
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Arya <aryasolhi@gmail.com>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
---------
Co-authored-by: Marek <mail@marek.onl>
* Bump `clap` from 4.5.3 to 4.5.4
* Bump `indexmap` from 2.2.5 to 2.2.6
* Bump `rayon` from 1.9.0 to 1.10.0
* Bump `tokio` from 1.36.0 to 1.37.0
* Bump `tokio-stream` from 0.1.14 to 0.1.15
* Bump `regex` from 1.10.3 to 1.10.4
* Bump `insta` from 1.36.1 to 1.38.0
* Bump `serde_json` from 1.0.113 to 1.0.115
* Bump `prost` from 0.12.2 and 0.12.3 to 0.12.4
* Bump `bitflags` from 2.4.2 to 2.5.0
* Bump `bs58` from 0.5.0 to 0.5.1
* Bump `incrementalmerkletree` from 0.5.0 to 0.5.1
* Bump `zcash_address` from 0.3.1 to 0.3.2
* Bump `bytes` from 1.5.0 to 1.6.0
* Bump `syn` from 2.0.53 to 2.0.58
* Bump `quote` from 1.0.35 to 1.0.36
* Bump `serde_yaml` from 0.9.33 to 0.9.34+deprecated
* Bump `primitive-types` + `zcash_history`
* Bump `jsonrpc` from 0.17.0 to 0.18.0
* Adds logging of column family size and database size on startup and shutdown
* Changes log level of column families size strings to debug. Adds TODO comment to use human_bytes crate for human-readable format of metrics. Adds print_db_metrics function to ZebraDb struct.
* Calls enumerate() on column_families to access index var
* Resolves cargo fmt checker results
* Resolves clippy lint
* Runs and fixes changes from fmt, clippy, check and test
* Removes prop.txt
* minor doc changes
---------
Co-authored-by: Elijah Hampton <elijahhampton@MBP-de-Elijah-2.lan>
Co-authored-by: Pili Guerra <mpguerra@users.noreply.github.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* removed derive copy from network, address and ledgerstate
* changed is_max_block_time_enforced to accept ref
* changed NetworkUpgrade::Current to accept ref
* changed NetworkUpgrade::Next to accept ref
* changed NetworkUpgrade::IsActivationHeight to accept ref
* changed NetworkUpgrade::TargetSpacingForHeight to accept ref
* changed NetworkUpgrade::TargetSpacings to accept ref
* changed NetworkUpgrade::MinimumDifficultySpacing_forHeight to accept ref
* changed NetworkUpgrade::IsTestnetMinDifficultyBlock to accept ref
* changed NetworkUpgrade::AveragingWindowTimespanForHeight to accept ref
* changed NetworkUpgrade::ActivationHeight to accept ref
* changed sapling_activation_height to accept ref
* fixed lifetime for target_spacings
* fixed sapling_activation_height
* changed transaction_to_fake_v5 and fake_v5_transactions_for_network to accept ref to network
* changed Input::vec_strategy to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_history.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/viewing_key* to accept ref to network
* changed functions in zebra-chain/src/transparent/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_primitives.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_note_encryption.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/history_tree* to accept ref to network
* changed functions in zebra-chain/src/block* to accept ref to network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* fixed errors in zebra-chain/src/block/arbitrary.rs
* finished fixing errors in zebra-chain - all crate tests pass
* changed functions in zebra-state::service::finalized_state to accept &Network
* changed functions in zebra-state::service::non_finalized_state to accept &Network
* zebra-state tests run but fail with overflow error
* zebra-state tests all pass
* converted zebra-network -- all crate tests pass
* applied all requested changes from review
* converted zebra-consensus -- all crate tests pass
* converted zebra-scan -- all crate tests pass
* converted zebra-rpc -- all crate tests pass
* converted zebra-grpc -- all crate tests pass
* converted zebrad -- all crate tests pass
* applied all requested changes from review
* fixed all clippy errors
* fixed build error in zebrad/src/components/mempool/crawler.rs
* updates ScanTask.subscribe() to return rsp_tx instead of awaiting it, returns service errors from grpc methods
* Adds a timeout to scan service and improves error message when subscribe responders are dropped
* Returns an error from `RegisterKeys` svc request when no keys are registered
* tests register keys error message
* Adds test for timeouts
* adds TODOs for fixing bugs
* Orders scan service requests in scan method
* removes CheckKeyHashes request
* fixes bad merge conflict resolution
* update test to check downcast to Elapsed error
* update errors in scan method
* update error msg in register_keys method
* fixes compiler error
* begin refactor suggested as "step 2": https://github.com/ZcashFoundation/zebra/issues/7968#issue-2003245309
Squashed from multiple commits to enable partial rebase
* break out more little traits
* add activation implementation leveraging From<Network> for lrz::cons::
* for transfer of ownership I cannot return a type that's owned by the method
* hrp_sapling_extended_full_viewing_key
* complete implementation of interface of Parameters on Network reuse Parameters on zcash Network where possible
* move doc-comments to trait declarations (from impls)
* Simplify/complete Parameters impl for Network
* Add checkpoint_list method, move documentation, etc
* move last match network to inside network method
* add back comment
* use zcash_address for parameter types in zebra-chain
* use inherent methods instead of big parameters passthrough
* revert to implementation of From on zcash_primitives::..::Network vs &zcash_prim...
* move match
* add test to block maximum time rule
* update changelog
* finish porting target_difficutly_limit
* remove obscelete code comment
* revert non-functional change
* finish migrating target_difficulty_limit, checkpoint_list
* update changelog
---------
Co-authored-by: Hazel OHearn <gygaxis@zingolabs.org>
* added functions for fetching block vectors
* inserted new network methods for vector fetching into zebra-chain
* changed tag back to test/feature=branch
* changed tag back to test/feature=branch
* changed tag back to test/feature=branch
* changed feature tag to proptest-impl, started implementing in zebra-consensus tests
* adding methods to zebra-consensus, lifetime error in src/transaction/tests.rs, needs refactoring
* finished adding methods to zebra-consensus
* finished adding new methods to zebrad
* added new methods to zebra-rpc and zebra-scan
* finished removing statements matching on Network from tests
* updated new error message
* changed get_block_bytes() and get_block_sapling_roots_bytes to return option and removed serialization error types as per requested changes in PR review
* removed match statements from zebra_chain::transaction::arbitrary::test_transactions() and new zebra-grpc tests
* moved zebra-chain::test_utils to zebra-chain::test
* removed get_ prefix from getter methods
* renamed zebra-chain::test to zebra-chain::tests
* renamed zebra-chain::test to zebra-chain::tests
* fixed clippy warnings
* changed block_map to return clone
* merges scan task tests and checks that the scan task removes keys
* Adds test to CI
* Skip to expected block height and assert that the result is from that height
* Updates test docs and uses zebrad state path for scan cache
* Log "Zcash network: {network}" from scan task commands test
* chore(dev-deps): always specify the version for dev-dependencies
* test(tower-batch-control): remove zebra-consensus dev dependency
Copies the Ed25519Verifier code directly to tower-batch-control tests
* test(zebra-consensus): update ed25519 verifier tests with ones from batch-control
* test(zebra-consensus): restore previous timeout values
The timeouts copied from tower-batch-control seems too low
and there must have been a reasoning why were they introduced
* chore: update dev-deps versions to beta.33
* chore(tower-batch-control): remove dev-dependency on metrics
* chore(tower-batch-control): remove zebra-chain dev-dependency
* Update zebra-scan/Cargo.toml
* bump all versions to match current release
* fix missed commas in version bumps
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Pili Guerra <mpguerra@users.noreply.github.com>
* update scan task to notify subscribe caller once the new subscribed_keys are sent on the watch channel
* Fixes timing bug in scan gRPC method:
Joins register/subscribe scan service calls, sends SubscribeResults request first, and filters out duplicate results from channel
* Removes outdated TODO
* wraps subscribed_keys in an Arc before sending to watch channel, fixes typo
* Remove result senders for keys that have been removed
* processes SubscribeResults messages
* send tx ids of results to the subscribe channel
* replaces BoxError with Report in scan_range
* adds a watch channel for using subscribed_keys in scan_range
* updates args to process_messages in test
* adds a `subscribe` method to ScanTask for sending a SubscribeResults cmd
* updates test for process_messages to cover subscribe cmds
* impls SubscribeResult service request and updates sender type
* adds test for SubscribeResults scan service request
* adds acceptance test
* updates tests and imports
* fixes acceptance test by using spawn_blocking to avoid blocking async executor and setting an appropriate start height
* fixes test
* Applies suggestions from code review.
* use tokio mpsc channel in scan task instead of std/blocking mpsc
* use tokio mpsc channel for results sender
* adds `was_parsed_keys_empty` instead of checking that all the parsed keys are new keys
* fixes test failures related to send errors in scan task
* returns height and key for scan results from subcribe_results results receiver
* hide scan_service mod in zebra-node-service behind feature
* Refactor obtaining of activation heights
* Impl the `RegisterKeys` service request
* Mock viewing keys for tests
* Refactor tests
* Apply suggestions from code review
Co-authored-by: Arya <aryasolhi@gmail.com>
* Remove a redundant comment
I don't think we need to assume the genesis block doesn't contain
shielded data as the comment says.
* Avoid using a single-letter variable
* Refactor mocking Sapling scanning keys
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
* adds clear_results RPC method for zebra-scan
* adds delete_keys rpc method
* adds docs
* Update zebra-grpc/proto/scanner.proto
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Apply suggestions from code review
* start zebra-scan gRPC server from zebrad start command
* adds a test that the scanner starts with zebrad
* adds a `listen_addr` field to the shielded scan config
* updates test to use a random port and set the listen_addr config field
* fixes test
* Update zebra-scan/src/config.rs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* fixes panic when trying to open multiple mutable storage instances.
* open db in blocking task
* fixes test
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* moves ScanTask to its own module in service module
* moves `process_messages()` method to scan_task.rs
* uses get_mut() and returns new keys
* updates types and adds scan_until() function
* adds and uses wait_for_height() function
* spawns scan_until_task_handler to poll scan_until_tasks FuturesUnordered
* corrects comment
* adds TODO
* updates expected test log, corrects panic msg, fixes fmt
* moves scan functions to scan_task module
* moves ScanTaskCommand and related method impls to its own module
* moves `ScanTask::mock()` test constructor to its own module
* creates `add_keys` mod and moves `scan_until()` function there
* moves scan task executor to its own module and adds ScanRangeTaskBuilder type
* renames add_keys to scan_range, moves executor to scan_task mod
* adds test for process_messages
* updates scan_height_and_store_results() to skip last_scanned_height check if there is no key height for a key in `parsed_keys`
* updates `default_test_config()`
* adds acceptance test for registering keys in ScanTask
* uses the right feature for the new acceptance test
* Applies suggestions from code review
* handle RemoveKeys command in ScanTask
* implements DeleteKeys request
* uses spawn_blocking and updates comments
* removes spawn_init fn
* adds test for new Storage method
* adds fake_sapling_results helper function
* adds test for scan service DeleteKeys request
* adds TODO for unwrap_or_clone
* checks the keys sent to the scan task for removal
* moves message processing to its own function
* adds a timeout for the scanner task response
* hide mock() methods behind cfg(test) or feature
* adds MAX_REQUEST_KEYS constant
* updates test to insert and delete results for a second key
* Update zebra-scan/src/init.rs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* test that the expected number of results are in the db
* fix unused import lint
* fixes unused imports
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Marek
dependabot[bot]
Arya
Alfredo Garcia
Elijah Hampton
idky137
Za Wilcox
bishopcheckmate