* Unify the `impl`s of `Sub` and `Add` for `Height`
* Adjust tests for `Height` subtraction
* Use `Height` instead of `i32`
* Use `block:Height` in RPC tests
* Use `let .. else` statement
Co-authored-by: Arya <aryasolhi@gmail.com>
* Update zebra-consensus/src/block/subsidy/general.rs
* Refactor the handling of height differences
* Remove a redundant comment
* Update zebrad/src/components/sync/progress.rs
Co-authored-by: Arya <aryasolhi@gmail.com>
* Update progress.rs
* impl TryFrom<u32> for Height
* Make some test assertions clearer
* Refactor estimate_up_to()
* Restore a comment that was accidentally removed
* Document when estimate_distance_to_network_chain_tip() returns None
* Change HeightDiff to i64 and make Height.sub(Height) return HeightDiff (no Option)
* Update chain tip estimates for HeightDiff i64
* Update subsidy for HeightDiff i64
* Fix some height calculation test edge cases
* Fix the funding stream interval calculation
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
Co-authored-by: teor <teor@riseup.net>
* adds confirmation field to getrawtransaction
* Updates tests
* Adds comment about correctness
* Apply suggestion revisions from review
* fixes overflow bug and adds test for valid confirmations value
* Update test to check that confirmations isn't too high
* Update transaction request to return confirmations
* Applies suggestions from PR review
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fixes test
* restore derives that were lost in a bad merge
---------
Co-authored-by: teor <teor@riseup.net>
* Remove unused dependencies
* Check for newly unused dependencies in CI
* Use the correct grep command
* Always show cargo machete output
* Ignore cargo machete exit status, use grep instead
* Use if instead of && and subshells
* Invert if logic
* Mark Zebra coinbase transactions with extra coinbase data
* Log when we commit a block mined by Zebra to our state
* Reduce logging instrumentation during block writes
* Remove debug types in Zebra block log
* Add network and commit to write task logs
* Apply an allow-list before we log arbitrary user messages from blocks
* Rate-limit Zebra mined block logging to once every 1000 blocks
* Add mining configs for extra coinbase data and imitating zcashd, but don't use them yet
* Check CoinbaseData size limit when building transparent transactions
* Replace LIKE_ZCASHD constants with a config
* Take extra coinbase data from the configured string
* Update the zebrad configs in the tests with new config fields
* Add the response type for `z_validateaddress`
* Add UAs to the address variants
* Remove a redundant TODO
* Impl `z_validateaddress`
* Add basic test vectors
* Add basic snapshots
* Remove a deprecated field from the RPC response
* Add basic snapshot data
* Check the semantic validity of UAs
* Refactor imports
* Refactor snapshot filenames
This PR removes the `.new` filename extensions from snapshots.
* Rename `address` to `unified_address`
* Stabilise the BestChainBlockHash state request
* Always include the block hash in the getblock RPC response
* Make the lightwalletd integration tests compatible with zcash/lightwalletd
* Update getblock RPC snapshots
* Return the correct missing block error code
* Use existing Work type to calculate get_difficulty RPC, round in f64 tests
* Use a valid difficulty in all snapshots
* Explain compatibility TODO
* Fix typo
* Document consensus rules in the difficulty module
* Calculate the difficulty using the high 128 bits of the U256 values
* Require 6 significant figures of accuracy in the difficulty unit tests
* fixup! Calculate the difficulty using the high 128 bits of the U256 values
* Update snapshots
* clippy: remove unnecessary return statement
* Add hash, height, and confirmations fields to getblock RPC
* Remove a test that is already checked by snapshots
* Document the performance requirements of the getblock RPC
* Update snapshots, use new naming scheme
* Fix off-by-one error in confirmations
* Fix spelling mistakes
* adds basic usage of long polling in gbt test
* adds !submit_old check before cancelling proposing a new template
* Removes break statement in long polling task
* Update zebrad/tests/common/rpc_client.rs
Co-authored-by: teor <teor@riseup.net>
* use blocking_send and watch channel
* fix "cannot block the current thread from within a runtime"
* Reduces interval between proposals and increases num proposals required.
* Runs rate-limiting sleeps in parallel to validation
* corrects comment.
---------
Co-authored-by: teor <teor@riseup.net>
* change error format in proposals
* use trim_matches
* make regex feature dependency
* remove regex fully
* remove char in comment to leave the file as it was before
* remove assertion lines from snapshots
* Move RPC method constants into their own module
* Rename RPC compatibility modules to avoid confusion
* Rename RPC middleware to include its new functionality
* Use FutureExt::inspect() for logging, and only format on failure
* Log all RPC errors at info level
* Make "invalid parameters" RPC error code match `zcashd`
* Revert "Temporarily fix the code for a disabled test"
This reverts commit d915624417cc946e53aac76449e0b5b719e03d2a.
* Check every valid time source in the proposal tests
* Activate block proposal tests in CI
* Repeats block proposal test a few times at an interval to sample different mempool contents
* Increase the number of templates tested to 10
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: arya2 <aryasolhi@gmail.com>
* Make it clearer that Zebra only supports transparent funding streams
* Initial getblocksubsidy RPC types and method, without ZEC conversion
* Add a ZEC fixed-point format wrapper to Amount
* Format getblocksubsidy fields in Zec
* Add snapshot tests for getblocksubsidy RPC
* Re-order RPC output to match zcashd
* Switch to formatting Zec with f64, because the getblocksubsidy RPC requires JSON numbers
* Sort RPC responses in zcashd funding stream order
* Add getblocksubsidy snapshots
* Fix a doc link
* Move Zec JSON formatter from zebra-chain to zebra-rpc
* Remove Ord impl for Zec, it's just for formatting
* Use fully-qualified path for serde derives
* Fix a clippy warning for the doc link fix
* Fix RPC comments and an error message
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* bump v1.0.0-rc.4
* Add new mainnet and testnet checkpoints generated using zcashd
* make changes to changelog from review
* move item to new section
* change section name
---------
Co-authored-by: teor <teor@riseup.net>
* Sorts transactions like zcashd in getrawmempool
* Simplifies sort logic and condenses duplicate code
* adds comment clarifying the intended byte order for transaction hashes
* Multiplies fee by MAX_BLOCK_BYTES/tx-size instead of tx-size
- Removes feature flag on get_raw_mempool
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Always uses `TransactionIds` request in tests
* reverts switch from #[cfg()] to cfg!()
* Adds feature flag to constant
* Updates tests and removes !cfg(not(test))
* Moves up comment
* adds missing transaction_ids
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Removes candidate_tx from candidate_txs
- Creates a new WeightedIndex instead of updating the weights
- Logs tx hashes and unpaid_actions in getblocktemplate
* Applies suggestions from PR review.
* Revert "Update code that we're going to delete in the next PR anyway"
This reverts commit 1fed70da9e.
* Initial zcash-test-block-template script without block proposal construction
* Try creating block data using jq and printf
* Move proposal_block_from_template() to zebra-rpc and remove eyre dependency
* Implement FromStr for DateTime32 and Duration32
* Basic block-template-to-proposal command without time source handling
* Move block proposal code into its own module
* Use time source in block-template-to-proposal
* Make block-template-to-proposal require the getblocktemplate-rpcs feature
* Use block-template-to-proposal in the test script zcash-rpc-block-template-to-proposal
* Apply new hex formatting to commitments and nonces in block proposal tests
* Re-add missing imports from rebase
* Re-add missing conversions from rebase
* Update to new method name after rebase
* Derive a Default impl
* Restore a comment that was accidentally deleted during the rebase
* Avoid a clippy::unwrap-in-result
* Temporarily fix the code for a disabled test
* Fix tool build with Docker caches
* Make clippy happy with the temporary fix
* Give a pass/fail status for each proposal response
* Accept zcashd block templates in block-template-to-proposal
* Fix pretty printing
* Zebra expects a longpollid, so give it a dummy value
* Add "required" fields which Zebra requires
* Use curtime as the dummy maxtime in zcashd templates
* Support large block proposals by reading proposal data from a file
* Test all valid time modes for each proposal
* Allow the user to set the time command
* Put debug logs into their own files
* Exit with an error status when any proposal is invalid
* Log the date and time to make it easier to match errors to node logs
dependabot[bot]
Marek
Arya
Deirdre Connolly
teor
Alfredo Garcia