* Allow custom testnets to define more parameters and to make peer connections based on the initial_testnet_peer config field
* Updates latest stored test config
* Update zebra-network/src/config.rs
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: Marek <mail@marek.onl>
* Adds a `target_difficulty_limit` field on `testnet::Parameters`
* updates test to increment block nonce until finding a block that's below the difficulty threshold
* increment the nonce while the difficulty is invalid instead of while the difficulty threshold is invalid
* Adds comments
* moves network Magic type from zebra-network to zebra-chain
* Adds `network_magic` field to `testnet::Parameters` and uses the regtest network magic from zcashd
* Add a network magic config field for custom testnets
* Adds/updates tests
* Update zebra-chain/src/parameters/network/testnet.rs
* Adds a link to the Regtest network magic in zcashd
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Adds a `target_difficulty_limit` field on `testnet::Parameters`
* updates test to increment block nonce until finding a block that's below the difficulty threshold
* increment the nonce while the difficulty is invalid instead of while the difficulty threshold is invalid
* Adds comments
* Allow configurable Nu5 activation height on Regtest
* Fixes test
* removes outdated TODO
* Adds `current_with_activation_height()` method and uses it in `Commitment::from_bytes()`
* Always activate Canopy at Height(1) on Regtest
* Ignores the zip 212 grace period on configured Testnets and Regtest
* - Returns early when there is no Heartwood activation height when creating or updating HistoryTree
- Skips call to `check::legacy_chain()` when no NU5 activation height is set (it would return immediately anyway)
- Replaces `.map()` with `.filter_map()` in `NetworkUpgrade::target_spacings()`
- Removes outdated TODO
* - When proof of work is disabled, skips checking if Zebra is synced to the network tip in the getblocktemplate method
* Sets full_verifier_utxo_lookahead to Height::MIN instead of panicking
* When network is regtest, skips starting sync task and commits the genesis block if it's missing in the state
* updates/fixes test config
* Adds test for committing Canopy blocks on Regtest
* - Updates median time past and difficulty checks to use fewer than 11/17/28 blocks
* uses SLOW_START_INTERVAL of 0 if PoW is disabled, adds TODOs
* Update getblocktemplate method to return reserved chain history activation root hash, uses Nu5 at height 1
Test passes.
* Updates test to expect NU5 as the default nu activation at Height(1)
* Removes invalid difficulty snapshot
* fixes tests
* removes regtest NU5 activation height config field
* Apply suggestions from code review
* Update zebra-state/src/service/check/difficulty.rs
Co-authored-by: Marek <mail@marek.onl>
* Update zebra-state/src/service/check/difficulty.rs
* Updates docs/comments, renames an argument
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
* Adds `network_name` field and accessor method on `Parameters`, uses it in the `Display` impl for `Network`
* Removes unnecessary `.filter()`
* adds constraints on valid network names and a test
* adds config field for setting network name, adds "with_" prefix to ParameterBuilder setter methods
* Adds `MainnetKind`, `TestnetKind`, and `RegtestKind` to reserved network names
* updates stored test configs and fixes `network_name()` docs
* Adds a `new_regtest()` method on `Network` and `testnet::Parameters`, updates config deserialization to return an error if the initial_testnet_peers include any default initial peers AND contain configured activation heights
* Updates `activates_network_upgrades_correctly` test to check Regtest activation heights (and default Mainnet/Testnet)
* Refactors if-let & match statement into general match statement, removes constraint against including `testnet_parameters` field/section in the config when using `Mainnet` or `Regtest`
* Removes outdated TODO
* Restores `testnet_parameters` section of the latest stored config.
* Adds `with_sapling_hrps()` method and uses it to set the Regtest HRPs in `new_regtest()`.
Adds a test for Sapling HRP validation
* Checks that default Mainnet/Testnet/Regtest Sapling HRPs pass validation in `with_sapling_hrps()`
* Uses the correct constant in test
* Adds `is_regtest()` methods
* Updates test docs
* drop custom panic hooks after expected panics
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
* Adds `network_name` field and accessor method on `Parameters`, uses it in the `Display` impl for `Network`
* Removes unnecessary `.filter()`
* adds constraints on valid network names and a test
* adds config field for setting network name, adds "with_" prefix to ParameterBuilder setter methods
* Adds `MainnetKind`, `TestnetKind`, and `RegtestKind` to reserved network names
* updates stored test configs and fixes `network_name()` docs
---------
Co-authored-by: Marek <mail@marek.onl>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
* adds activation heights field
* updates stored test config, adds a quicker test for checking that stored configs can be parsed, adds an intermediate representation of activation heights
* implement Parameters for Network
* Passes &Network directly instead of converting to zp_consensus::Network where there were conversions
* fixes a bad merge (removes a network conversion in zcash_note_encryption)
* Adds a test for the Parameters impl for zebra_chain::Network
* fixes doc links
* - Makes the `activation_heights` config field optional by adding a #[serde(default)]
- Panics if a non-zero activation height is provided for the `Genesis` network upgrade
- Always sets the `Genesis` and `BeforeOverwinter` network upgrade activation heights to 0 and 1, `BeforeOverwinter` could be overwritten by a later network upgrade
- Makes the `activation_heights` field on `Parameters` private, adds/uses an accessor method instead, and adds a builder struct and `build()` method
* small refactor of activation_heights() method
* check that activation heights are in the right order
* Updates `NetworkUpgrade::activation_height()` to return the height of the next NetworkUpgrade if it doesn't find the activation height of `&self`
* checks that the miner address is of TestnetKind on Regtest and update assertion message
* Adds a DNetworkUpgradeActivationHeights struct for better control over how activation heights can be configured
* moves all ordered network upgrades to a constant, adds a no_duplicates test, moves struct with activation heights outside deserialization impl and accepts it in `ParametersBuilder::activation_heights()` instead of a Vec
* panics if any network upgrades are configured to activate at Height(0) because it's reserved for Genesis
* Simplifies the `ParametersBuilder::activation_heights()` method and removes an unnecessary test.
* Adds Sapling HRPs as fields on testnet params. (#8398)
* Applies suggestions from code review.
* Update zebra-chain/src/parameters/network_upgrade.rs
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* fix beta imports and other warnings
* clippy lints beta
* move attributes to after docs
Co-authored-by: Marek <mail@marek.onl>
* move some code to test module
* implement display instead of direct tostring for LongPollId
Co-authored-by: Arya <aryasolhi@gmail.com>
* fix typo
---------
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Arya <aryasolhi@gmail.com>
* minor cleanup and rename
* Adds an empty NetworkParameters struct to Network::Testnet variant, updates production code.
* Updates tests
* Adds `NetworkKind` and uses it instead of `Network` in `HistoryTreeParts` and `transparent::Address`
* Adds a [network.testnet_parameters] section to the config, uses `NetworkKind` as zebra_network::Config::network field type, and converts 'Network' to `NetworkKind` before serializing
* Applies some suggestions from code review
* Applies suggestions from code review
* returns b58 prefix constants directly to remove From<NetworkKind> impl for zcash_primitives::consensus::Network
* Applies more suggestions from code review.
* moves conversions to zcash_primitives::consensus::Network to where they're used.
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* rename `network` variables and method names typed as NetworkKind to `network_kind`
* use only test block heights for the network associated with them
* Applies more suggestions from code review.
* Rename `NetworkParameters` to `Parameters` and move it a new `testnet` module
---------
Co-authored-by: Marek <mail@marek.onl>
* removed derive copy from network, address and ledgerstate
* changed is_max_block_time_enforced to accept ref
* changed NetworkUpgrade::Current to accept ref
* changed NetworkUpgrade::Next to accept ref
* changed NetworkUpgrade::IsActivationHeight to accept ref
* changed NetworkUpgrade::TargetSpacingForHeight to accept ref
* changed NetworkUpgrade::TargetSpacings to accept ref
* changed NetworkUpgrade::MinimumDifficultySpacing_forHeight to accept ref
* changed NetworkUpgrade::IsTestnetMinDifficultyBlock to accept ref
* changed NetworkUpgrade::AveragingWindowTimespanForHeight to accept ref
* changed NetworkUpgrade::ActivationHeight to accept ref
* changed sapling_activation_height to accept ref
* fixed lifetime for target_spacings
* fixed sapling_activation_height
* changed transaction_to_fake_v5 and fake_v5_transactions_for_network to accept ref to network
* changed Input::vec_strategy to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_history.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/history_tree.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/viewing_key* to accept ref to network
* changed functions in zebra-chain/src/transparent/address.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_primitives.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/zcash_note_encryption.rs to accept ref to network
* changed functions in zebra-chain/src/primitives/history_tree* to accept ref to network
* changed functions in zebra-chain/src/block* to accept ref to network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain::parameters::network
* fixed errors in zebra-chain
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* changed NonEmptyHistoryTree and InnerHistoryTree to hold value instead of ref
* fixed errors in zebra-chain/src/block/arbitrary.rs
* finished fixing errors in zebra-chain - all crate tests pass
* changed functions in zebra-state::service::finalized_state to accept &Network
* changed functions in zebra-state::service::non_finalized_state to accept &Network
* zebra-state tests run but fail with overflow error
* zebra-state tests all pass
* converted zebra-network -- all crate tests pass
* applied all requested changes from review
* converted zebra-consensus -- all crate tests pass
* converted zebra-scan -- all crate tests pass
* converted zebra-rpc -- all crate tests pass
* converted zebra-grpc -- all crate tests pass
* converted zebrad -- all crate tests pass
* applied all requested changes from review
* fixed all clippy errors
* fixed build error in zebrad/src/components/mempool/crawler.rs
* updates ScanTask.subscribe() to return rsp_tx instead of awaiting it, returns service errors from grpc methods
* Adds a timeout to scan service and improves error message when subscribe responders are dropped
* Returns an error from `RegisterKeys` svc request when no keys are registered
* tests register keys error message
* Adds test for timeouts
* adds TODOs for fixing bugs
* Orders scan service requests in scan method
* removes CheckKeyHashes request
* fixes bad merge conflict resolution
* update test to check downcast to Elapsed error
* update errors in scan method
* update error msg in register_keys method
* fixes compiler error
* merges scan task tests and checks that the scan task removes keys
* Adds test to CI
* Skip to expected block height and assert that the result is from that height
* Updates test docs and uses zebrad state path for scan cache
* Log "Zcash network: {network}" from scan task commands test
* update scan task to notify subscribe caller once the new subscribed_keys are sent on the watch channel
* Fixes timing bug in scan gRPC method:
Joins register/subscribe scan service calls, sends SubscribeResults request first, and filters out duplicate results from channel
* Removes outdated TODO
* wraps subscribed_keys in an Arc before sending to watch channel, fixes typo
* Remove result senders for keys that have been removed
* processes SubscribeResults messages
* send tx ids of results to the subscribe channel
* replaces BoxError with Report in scan_range
* adds a watch channel for using subscribed_keys in scan_range
* updates args to process_messages in test
* adds a `subscribe` method to ScanTask for sending a SubscribeResults cmd
* updates test for process_messages to cover subscribe cmds
* impls SubscribeResult service request and updates sender type
* adds test for SubscribeResults scan service request
* adds acceptance test
* updates tests and imports
* fixes acceptance test by using spawn_blocking to avoid blocking async executor and setting an appropriate start height
* fixes test
* Applies suggestions from code review.
* use tokio mpsc channel in scan task instead of std/blocking mpsc
* use tokio mpsc channel for results sender
* adds `was_parsed_keys_empty` instead of checking that all the parsed keys are new keys
* fixes test failures related to send errors in scan task
* returns height and key for scan results from subcribe_results results receiver
* hide scan_service mod in zebra-node-service behind feature
* Refactor obtaining of activation heights
* Impl the `RegisterKeys` service request
* Mock viewing keys for tests
* Refactor tests
* Apply suggestions from code review
Co-authored-by: Arya <aryasolhi@gmail.com>
* Remove a redundant comment
I don't think we need to assume the genesis block doesn't contain
shielded data as the comment says.
* Avoid using a single-letter variable
* Refactor mocking Sapling scanning keys
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
* adds clear_results RPC method for zebra-scan
* adds delete_keys rpc method
* adds docs
* Update zebra-grpc/proto/scanner.proto
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Apply suggestions from code review
* start zebra-scan gRPC server from zebrad start command
* adds a test that the scanner starts with zebrad
* adds a `listen_addr` field to the shielded scan config
* updates test to use a random port and set the listen_addr config field
* fixes test
* Update zebra-scan/src/config.rs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* fixes panic when trying to open multiple mutable storage instances.
* open db in blocking task
* fixes test
---------
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* moves ScanTask to its own module in service module
* moves `process_messages()` method to scan_task.rs
* uses get_mut() and returns new keys
* updates types and adds scan_until() function
* adds and uses wait_for_height() function
* spawns scan_until_task_handler to poll scan_until_tasks FuturesUnordered
* corrects comment
* adds TODO
* updates expected test log, corrects panic msg, fixes fmt
* moves scan functions to scan_task module
* moves ScanTaskCommand and related method impls to its own module
* moves `ScanTask::mock()` test constructor to its own module
* creates `add_keys` mod and moves `scan_until()` function there
* moves scan task executor to its own module and adds ScanRangeTaskBuilder type
* renames add_keys to scan_range, moves executor to scan_task mod
* adds test for process_messages
* updates scan_height_and_store_results() to skip last_scanned_height check if there is no key height for a key in `parsed_keys`
* updates `default_test_config()`
* adds acceptance test for registering keys in ScanTask
* uses the right feature for the new acceptance test
* Applies suggestions from code review
* Patch equihash to use the solver branch
* Add an internal-miner feature and set up its dependencies
* Remove 'Experimental' from mining RPC docs
* Fix a nightly clippy::question_mark lint
* Move a byte array utility function to zebra-chain
* fixup! Add an internal-miner feature and set up its dependencies
* Add an equihash::Solution::solve() method with difficulty checks
* Check solution is valid before returning it
* Add a TODO to check for peers before mining
* Move config validation into GetBlockTemplateRpcImpl::new()
* fixup! fixup! Add an internal-miner feature and set up its dependencies
* Use the same generic constraints for GetBlockTemplateRpcImpl struct and impls
* Start adding an internal miner component
* Add the miner task to the start command
* Add basic miner code
* Split out a method to mine one block
* Spawn to a blocking thread
* Wait until a valid template is available
* Handle shutdown
* Run mining on low priority threads
* Ignore some invalid solutions
* Use a difference nonce for each solver thread
* Update TODOs
* Change the patch into a renamed dependency to simplify crate releases
* Clean up instrumentation and TODOs
* Make RPC instances cloneable and clean up generics
* Make LongPollId Copy so it's easier to use
* Add API to restart mining if there's a new block template
* Actually restart mining if there's a new block template
* Tidy instrumentation
* fixup! Move config validation into GetBlockTemplateRpcImpl::new()
* fixup! Make RPC instances cloneable and clean up generics
* Run the template generator and one miner concurrently
* Reduce logging
* Fix a bug in getblocktemplate RPC tip change detection
* Work around some watch channel change bugs
* Rate-limit template changes in the receiver
* Run one mining solver per available core
* Use updated C code with double-free protection
* Update to the latest solver branch
* Return and submit all valid solutions
* Document what INPUT_LENGTH means
* Fix watch channel change detection
* Don't return early when a mining task fails
* Spawn async miner tasks to avoid cooperative blocking, deadlocks, and improve shutdown responsiveness
* Make existing parallelism docs and configs consistent
* Add a mining parallelism config
* Use the minimum of the configured or available threads for mining
* Ignore optional feature fields in tests
* Downgrade some frequent logs to debug
* Document new zebrad features and tasks
* Describe the internal-miner feature in the CHANGELOG
* Update dependency to de-duplicate equihash solutions
* Use futures::StreamExt instead of TryStreamExt
* Fix a panic message typo
* Note default path to config file in README and docs
* Applies suggestions from review & adds new test config file
* removes default path for 'Other' OSes from ZebradConfig docs
* fixes config_tests
* Run clippy and build all targets on all crates individually
* Fix prod and test features for scanner deps
* Standardise dependency order
* Remove unnecessary async in tests
* Fix an unused import in a test
* Work around a no space left on device error
* Actually just use a larger runner
* Provide access to DiskDb and DiskWriteBatch outside the state using a feature
* Actually let's export ZebraDb for the format upgrade code
* Pass column families to ZebraDb as an argument
* Allow the database kind to be changed in config.rs
* Use the state kind in finalized_state.rs
* Allow different database kinds in ZebraDb, but don't move the upgrade code yet
* Allow different database kinds in DiskDb
* Allow different database kinds in upgrade.rs, but don't split the upgrade code out yet
* Add new arguments to raw database tests
* Fix doc links
* Fix internal imports
* Fix unused code
* Update zebrad version metadata
* Create a specific state database delete function
* Fix state exports
* Fix zebrad tests
* Fix zebrad state write tests
* Make CI run again
* Fix dead code warnings for test methods
* Remove unnecessary async on some tests
* Fix logging required by tests
* Fix logging required in test itself
* Fix variable names
* Try to copy the message and add regexes
* Simple replacements of doc.zebra.zfnd.org with docs.rs
* Manual fixes for specific main/internal/external docs
* Point developer docs to doc-internal.zebra.zfnd.org
* fastmod --glob '\!.git' -- doc.zebra.zfnd.org/zebrad docs.rs/zebrad/latest/zebrad
* Manually remove any remaining doc.zfnd.zebra.org links
* Remove the external docs job
* Add changelog entry and fix links
* Fix links that were broken before this PR
* Add tree key format and cached root upgrades
* Document the changes in the upgrades
* Remove unnecessary clippy::unwrap_in_result
* Fix database type
* Bump state version
* Skip some checks if the database is empty
* Fix tests for a short state upgrade
* Disable format checks in some tests
* Document state performance issues
* Clarify upgrade behaviour
* Clarify panic messages
* Delete incorrect genesis trees write code
* Fix metrics handling for genesis
* Remove an unused import
* Explain why genesis anchors are ok
* Update snapshots
* Debug a failing test
* Fix some tests
* Fix missing imports
* Move the state check in a test
* Fix comment and doc typos
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Arya <aryasolhi@gmail.com>
* Clarify what a long upgrade is
* Rename unused function arguments
Co-authored-by: Marek <mail@marek.onl>
* Add all_unordered log regex matching methods
* Fix timing issues with version upgrades and other logs
* Fix argument name in docs
Co-authored-by: Marek <mail@marek.onl>
* Explain match until first for all regexes behaviour better
---------
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Arya <aryasolhi@gmail.com>
* Enable getblocktemplate-rpcs in production builds
* Update mining instructions
* Consistently use ZF funding stream addresses in examples
* Simplify skip_getblocktemplate()
* Set the test miner address based on the network
* Correctly skip checks in lightwalletd send transactions test
* Wait longer for transaction query
* Wait longer before re-checking the mempool
* Skip mempool checks if it wasn't queried by lightwalletd
* rustfmt
* clippy and rustfmt
* Fix attribute issue
* Fix typo
Co-authored-by: Arya <aryasolhi@gmail.com>
---------
Co-authored-by: Arya <aryasolhi@gmail.com>
* Correctly skip checks in lightwalletd send transactions test
* Wait longer for transaction query
* Wait longer before re-checking the mempool
* Skip mempool checks if it wasn't queried by lightwalletd
* rustfmt
* clippy and rustfmt
* Fix attribute issue
* Add a progress bar config that is disabled unless the feature is on
* Simplify the default config
* Enable the progress bar feature by default, but require the config
* Rename progress bars config to avoid merge conflicts
* Use a log file when the progress bar is activated
* Document how to configure progress bars
* Handle log files in config_tests and check config path
* Fix doc link
* Fix path check
* Fix config log matching
* Fix clippy warning
* Add tracing to config tests
* It's zebrad not zebra
* cargo fmt --all
* Update release for config file changes
* Fix config test failures
* Allow printing to stdout in a method
* Avoid manual handling of previous sapling trees by using iterator windows instead
* Avoid manual sapling subtree index handling by comparing prev and current subtree indexes instead
* Simplify adding notes by using the exact number of remaining notes
* Simplify by skipping the first block, because it can't complete a subtree
* Re-use existing tree update code
* Apply the sapling changes to orchard subtree updates
* add a reverse database column family iterator function
* Make skipping the lowest tree independent of iteration order
* Move new subtree checks into the iterator, rename to end_height
* Split subtree calculation into a new method
* Split the calculate and write methods
* Quickly check the first subtree before running the full upgrade
* Do the quick checks every time Zebra runs, and refactor slow check error handling
* Do quick checks for orchard as well
* Make orchard tree upgrade match sapling upgrade code
* Upgrade subtrees in reverse height order
* Bump the database patch version so the upgrade runs again
* Reset previous subtree upgrade data before doing this one
* Add extra checks to subtree calculation to diagnose errors
* Use correct heights for subtrees completed at the end of a block
* Add even more checks to diagnose issues
* Instrument upgrade methods to improve diagnostics
* Prevent modification of re-used trees
* Debug with subtree positions as well
* Fix an off-by-one error with completed subtrees
* Fix typos and confusing comments
Co-authored-by: Marek <mail@marek.onl>
* Fix mistaken previous tree handling and end tree comments
* Remove unnecessary subtraction in remaining leaves calc
* Log heights when assertions fail
* Fix new subtree detection filter
* Move new subtree check into a method, cleanup unused code
* Remove redundant assertions
* Wait for subtree upgrade before testing RPCs
* Fix subtree search in quick check
* Temporarily upgrade subtrees in forward height order
* Clarify some comments
* Fix missing test imports
* Fix subtree logging
* Add a comment about a potential hang with future upgrades
* Fix zebrad var ownership
* Log more info when add_subtrees.rs fails
* cargo fmt --all
* Fix unrelated clippy::unnecessary_unwrap
* cargo clippy --fix --all-features --all-targets; cargo fmt --all
* Stop the quick check depending on tree de-duplication
* Refactor waiting for the upgrade into functions
* Wait for state upgrades whenever the cached state is updated
* Wait for the testnet upgrade in the right place
* Fix unused variable
* Fix a subtree detection bug and comments
* Remove an early reference to reverse direction
* Stop skipping subtrees completed at the end of blocks
* Actually fix new subtree code
---------
Co-authored-by: Marek <mail@marek.onl>
* update docs for new lightwalletd version used in Zebra
* update some asserts
* add `RUST_LOG` to docker `entrypoint.sh` file
* clarify zecwallet-cli is untested with zcash/lightwalletd fork in the book
* revert entrypoint rust log changes
* remove sleep
* revert doc changes
* change formatting in expected output
* try sleep now that CI is working
* try sending more transactions
* remove tests with failures
* remove newline
* obtain lightwalletd from the logs
* revert #7332
* temporarily stop checking that the update sync has a good cached state
* Revert "temporarily stop checking that the update sync has a good cached state"
This reverts commit 0fb10938d9.
* add `save_to_disk` to workflow
* Fix lightwalletd height_grep_text for ECC fork
* Add a TODO about blocking the async executor
---------
Co-authored-by: teor <teor@riseup.net>
* Add lightwalletd's protobuf types
* Don't explicitly derive `Eq` for enums
I got bitten by this bug: https://github.com/tokio-rs/prost/issues/332
when I added the enum `ShieldedProtocol` to the file `service.proto`.
The problem is that `prost` implicitly derives `Eq` for enums, so
deriving it explicitly via `type_attribute` causes a conflict. Lukily,
there is another method `message_attribute` that operates only on
messages and not enums.
* Test the `z_getsubtreesbyindex` RPC
* Fix a typo
* Add test vectors
* upgrade docs for new lightwalletd repo zebra is using now
* Update book/src/user/lightwalletd.md
Co-authored-by: Marek <mail@marek.onl>
---------
Co-authored-by: Marek <mail@marek.onl>
* add the basics
* add some docs, move code
* upgrade compact formats to https://github.com/zcash/lightwalletd/blob/v0.4.15/walletrpc/compact_formats.proto
* add a test for in sync chain
* test changing to ecc lightwalletd
* revert change of lightwalletd repo (already merged to main)
* add debug log to see whats going on with the test
* change log to tracing::info
* remove log line
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move format upgrades to their own module and enum
* Launch a format change thread if needed, and shut it down during shutdown
* Add some TODOs and remove a redundant timer
* Regularly check for panics in the state upgrade task
* Only run example upgrade once, change version field names
* Increment database format to 25.0.2: add format change task
* Log the running and initial disk database format versions on startup
* Add initial disk and running state versions to cached state images in CI
* Fix missing imports
* Fix typo in logs workflow command
* Add a force_save_to_disk argument to the CI workflow
* Move use_internet_connection into zebrad_config()
* fastmod can_spawn_zebrad_for_rpc can_spawn_zebrad_for_test_type zebra*
* Add a spawn_zebrad_without_rpc() function
* Remove unused copy_state() test code
* Assert that upgrades and downgrades happen with the correct versions
* Add a kill_and_return_output() method for tests
* Add a test for new_state_format() versions (no upgrades or downgrades)
* Add use_internet_connection to can_spawn_zebrad_for_test_type()
* Fix workflow parameter passing
* Check that reopening a new database doesn't upgrade (or downgrade) the format
* Allow ephemeral to be set to false even if we don't have a cached state
* Add a test type that will accept any kind of state
* When re-using a directory, configure the state test config with that path
* Actually mark newly created databases with their format versions
* Wait for the state to be opened before testing the format
* Run state format tests on mainnet and testnet configs (no network access)
* run multiple reopens in tests
* Test upgrades run correctly
* Test that version downgrades work as expected (best effort)
* Add a TODO for testing partial updates
* Fix missing test arguments
* clippy if chain
* Fix typo
* another typo
* Pass a database instance to the format upgrade task
* Fix a timing issue in the tests
* Fix version matching in CI
* Use correct env var reference
* Use correct github env file
* Wait for the database to be written before killing Zebra
* Use correct workflow syntax
* Version changes aren't always upgrades
---------
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Delete an unused CI job that was previously partially deleted
* Add 2 more jobs to the full sync test
* Increase Rust test time: current expected time is 60 hours
* Rewrite some state cache docs to clarify
* Add a zebra_network::Config.cache_dir for peer address caches
* Add new config test files and fix config test failure message
* Create some zebra-chain and zebra-network convenience functions
* Add methods for reading and writing the peer address cache
* Add cached disk peers to the initial peers list
* Add metrics and logging for loading and storing the peer cache
* Replace log of useless redacted peer IP addresses
* Limit the peer cache minimum and maximum size, don't write empty caches
* Add a cacheable_peers() method to the address book
* Add a peer disk cache updater task to the peer set tasks
* Document that the peer cache is shared by multiple instances unless configured otherwise
* Disable peer cache read/write in disconnected tests
* Make initial peer cache updater sleep shorter for tests
* Add unit tests for reading and writing the peer cache
* Update the task list in the start command docs
* Modify the existing persistent acceptance test to check for peer caches
* Update the peer cache directory when writing test configs
* Add a CacheDir type so the default config can be enabled, but tests can disable it
* Update tests to use the CacheDir config type
* Rename some CacheDir internals
* Add config file test cases for each kind of CacheDir config
* Panic if the config contains invalid socket addresses, rather than continuing
* Add a network directory to state cache directory contents tests
* Add new network.cache_dir config to the config parsing tests
* rename verifiers
* rename `PreparedBlock` to `SemanticallyVerifiedBlock`
* rename `CommitBlock` to `SemanticallyVerifiedBlock`
* rename `FinalizedBlock` to `CheckpointVerifiedBlock`
* rename `CommitFinalizedBlock` to `CommitCheckpointVerifiedBlock`
* rename `FinalizedWithTrees` to `ContextuallyVerifiedBlockWithTrees`
* rename `ContextuallyValidBlock` to `ContextuallyVerifiedBlock`
* change some `finalized` variables or function arguments to `checkpoint_verified`
* fix docs
* document the difference between `CheckpointVerifiedBlock` and `ContextuallyVerifiedBlock`
* fix doc links
* apply suggestions to request
Co-authored-by: Marek <mail@marek.onl>
* apply suggestions to service
Co-authored-by: Marek <mail@marek.onl>
* apply suggestions to finalized_state.rs and write.rs
Co-authored-by: Marek <mail@marek.onl>
* fmt
* change some more variable names
* change a few missing generics
* fix checkpoint log issue
* rename more `prepared` vars `semantically_verified`
* fix test regex
* fix test regex 2
---------
Co-authored-by: Marek <mail@marek.onl>
Arya
Alfredo Garcia
idky137
Marek
teor