* add serialization for value balances
* change test names
* change panic messages
* add a deserialization test
* return the errors from `from_bytes()` methods
* add prop test for serialize/deserialize Amount
* Move amount proptests to amount::tests::prop
Co-authored-by: teor <teor@riseup.net>
* Simplify state service initialization in test
Use the test helper function to remove redundant code.
* Create `BestTipHeight` helper type
This type abstracts away the calculation of the best tip height based on
the finalized block height and the best non-finalized chain's tip.
* Add `best_tip_height` field to `StateService`
The receiver endpoint is currently ignored.
* Return receiver endpoint from service constructor
Make it available so that the best tip height can be watched.
* Update finalized height after finalizing blocks
After blocks from the queue are finalized and committed to disk, update
the finalized block height.
* Update best non-finalized height after validation
Update the value of the best non-finalized chain tip block height after
a new block is committed to the non-finalized state.
* Update finalized height after loading from disk
When `FinalizedState` is first created, it loads the state from
persistent storage, and the finalized tip height is updated. Therefore,
the `best_tip_height` must be notified of the initial value.
* Update the finalized height on checkpoint commit
When a checkpointed block is commited, it bypasses the non-finalized
state, so there's an extra place where the finalized height has to be
updated.
* Add `best_tip_height` to `Handshake` service
It can be configured using the `Builder::with_best_tip_height`. It's
currently not used, but it will be used to determine if a connection to
a remote peer should be rejected or not based on that peer's protocol
version.
* Require best tip height to init. `zebra_network`
Without it the handshake service can't properly enforce the minimum
network protocol version from peers. Zebrad obtains the best tip height
endpoint from `zebra_state`, and the test vectors simply use a dummy
endpoint that's fixed at the genesis height.
* Pass `best_tip_height` to proto. ver. negotiation
The protocol version negotiation code will reject connections to peers
if they are using an old protocol version. An old version is determined
based on the current known best chain tip height.
* Handle an optional height in `Version`
Fallback to the genesis height in `None` is specified.
* Reject connections to peers on old proto. versions
Avoid connecting to peers that are on protocol versions that don't
recognize a network update.
* Document why peers on old versions are rejected
Describe why it's a security issue above the check.
* Test if `BestTipHeight` starts with `None`
Check if initially there is no best tip height.
* Test if best tip height is max. of latest values
After applying a list of random updates where each one either sets the
finalized height or the non-finalized height, check that the best tip
height is the maximum of the most recently set finalized height and the
most recently set non-finalized height.
* Add `queue_and_commit_finalized` method
A small refactor to make testing easier. The handling of requests for
committing non-finalized and finalized blocks is now more consistent.
* Add `assert_block_can_be_validated` helper
Refactor to move into a separate method some assertions that are done
before a block is validated. This is to allow moving these assertions
more easily to simplify testing.
* Remove redundant PoW block assertion
It's also checked in
`zebra_state::service::check::block_is_contextually_valid`, and it was
getting in the way of tests that received a gossiped block before
finalizing enough blocks.
* Create a test strategy for test vector chain
Splits a chain loaded from the test vectors in two parts, containing the
blocks to finalize and the blocks to keep in the non-finalized state.
* Test committing blocks update best tip height
Create a mock blockchain state, with a chain of finalized blocks and a
chain of non-finalized blocks. Commit all the blocks appropriately, and
verify that the best tip height is updated.
Co-authored-by: teor <teor@riseup.net>
* Add ZIP-221 history tree to finalized state
* Improve error / panic handling; improve documentation
* Return error again when preparing batch, fix expect messages
* Fix bug when pushing the Heartwood actiation block to the history tree
* Re-increase database version since it was increased in main
Co-authored-by: teor <teor@riseup.net>
* Make legacy chain limit clearer
That way, it doesn't get confused with the coinbase maturity limit.
* Allow 1-5 transactions in each generated block, not always 5
* rustfmt
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Tidy chain Cargo.toml
* Organize imports
* Add method to get note commitments from all Actions in Orchard shielded data
* Add method to get note commitments from all JoinSplits in Sprout JoinSplitData
* Add Request and Response variants for awaiting anchors
* Add anchors and note commitment trees to finalized state db
* Add (From|Into)Disk impls for tree::Roots and stubs for NoteCommitmentTrees
* Track anchors and note commitment trees in Chain
Append note commitments to their trees when doing update_chain_state_with,
then use the resulting Sapling and Orchard roots to pass to history_tree, and add
new roots to the anchor sets.
* Handle errors when appending to note commitment trees
* Add comments explaining why note commitment are not removed from the tree in revert_chain_state_with
* Implementing note commitments in finalized state
* Finish serialization of Orchard tree; remove old tree when updating finalize state
* Add serialization and finalized state updates for Sprout and Sapling trees
* Partially handle trees in non-finalized state. Use Option for trees in Chain
* Rebuild trees when forking; change finalized state tree getters to not require height
* Pass empty trees to tests; use empty trees by default in Chain
* Also rebuild anchor sets when forking
* Use empty tree as default in finalized state tree getters (for now)
* Use HashMultiSet for anchors in order to make pop_root() work correctly
* Reduce DEFAULT_PARTIAL_CHAIN_PROPTEST_CASES and MAX_PARTIAL_CHAIN_BLOCKS
* Reduce DEFAULT_PARTIAL_CHAIN_PROPTEST_CASES and MAX_PARTIAL_CHAIN_BLOCKS even more
* Apply suggestions from code review
* Add comments about order of note commitments and related methods/fields
* Don't use Option for trees
* Set DEFAULT_PARTIAL_CHAIN_PROPTEST_CASES=1 and restore MAX_PARTIAL_CHAIN_BLOCKS
* Remove unneeded anchor set rebuilding in fork()
* Improve proptest formatting
* Add missing comparisons to eq_internal_state
* Renamed sprout::tree::NoteCommitmentTree::hash() to root()
* Improve comments
* Add asserts, add issues to TODOs
* Remove impl Default for Chain since it was only used by tests
* Improve documentation and assertions; add tree serialization tests
* Remove Sprout code, which will be moved to another branch
* Add todo! in Sprout tree append()
* Remove stub request, response *Anchor* handling for now
* Add test for validating Sapling note commitment tree using test blocks
* Increase database version (new columns added for note commitment trees and anchors)
* Update test to make sure the order of sapling_note_commitments() is being tested
* Improve comments and structure of the test
* Improve variable names again
* Rustfmt
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Conrado P. L. Gouvea <conradoplg@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
* Validate transparent coinbase output maturity and shielding
- Add a CoinbaseSpendRestriction enum and Transaction method
- Validate transparent coinbase spends in non-finalized chains
* Don't use genesis created UTXOs for spends in generated block chains
* Refactor out a new_transaction_ordered_outputs function
* Add Transaction::outputs_mut for tests
* Generate valid transparent spends in arbitrary block chains
* When generating blocks, fixup the block contents, then the block hash
* Test that generated chains contain at least one transparent spend
* Make generated chains long enough for reliable tests
* Add transparent and shielded input and output methods to Transaction
* Split chain generation into 3 functions
* Test that unshielded and immature transparent coinbase spends fail
* Comment punctuation
* Clarify a comment
* Clarify probability calculation
* Test that shielded mature coinbase output spends succeed
* add value_balance methods to transparent and shielded
* add value_balance() to transaction
* check the remaining value consensus rule
* change error name
* fix doc and nitpick
* refactor value_balance() method for joinsplit
* changes to value_balance() of Inputs
* implement joinsplits() method(not working)
* remove created methods
* remove special case
* change return error in utilities
* move utils functions to transaction methods
* fix the docs
* simplify some code
* add constrains explicitly
* remove turbofish
* refactor some transaction methods
* fix value balance signs, add docs
* simplify some code
* avoid panic in consensus check
* add missing doc
* move remaining value balance check to the state
* make changes from the last review
Co-authored-by: teor <teor@riseup.net>
* Create a `zebra_state::init_test` helper function
This function will be used as a replacement for `zebra_state::init`
inside tests. It's a simpler alternative because it can ignore any
details that aren't relevant for tests.
* Use `init_test` inside `zebra-state` tests
Update usages of `init` to use `init_test` instead, which simplifies
most cases.
* Use `zebra_state::init_test` in `zebra-consensus`
Replace usages of `zebra_state::init` with the new helper function. This
simplifies the code a bit.
* Add `proptest-impl` feature to `zebra-state`
This prepares the `zebra-state` crate to be able to export some
test-specific helper types and functions.
* Add `arbitrary` module to `zebra-state` root
A separate module to contain the `Prepare` trait, since it's required by
some prop-test strategies and therefore can't be in the `tests` module.
* Replace usages of `tests::Prepare`
Use the same trait but placed in a new module that's accessible based on
the feature flag.
* Remove old `Prepare` trait
It was obsoleted by the new copy in the `arbitrary` module.
* Make `StateService` crate-accessible
Prepare for it to be accessible in some test modules.
* Refactor strategy function import
Import the function directly, instead of just its containing module.
* Move some strategy functions to `tests::setup`
Create a new module for the strategy functions that are only used
internally.
Co-authored-by: teor <teor@riseup.net>
* Make some NonFinalizedState methods test-only
* Rename nullifier tests for clarity
* Reduce test times by reducing default proptest cases
The state tests should be about 4x faster after these changes.
They reduce total state test "user CPU" time to 20-30 seconds on my
machine. Previously it was around 2 minutes.
* Replace multiple pushes with extend
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Reject transparent output double-spends
Check that transparent spends use unspent outputs from:
* earlier transaction in the same block,
* earlier blocks in the parent non-finalized chain, or
* the finalized state.
* Fixup UTXOs in proptests
* Add a comment
* Clarify a consensus rule implementation
* Fix an incorrect comment
* Fix an incorrect error message
* Clarify a comment
* Document `unspent_utxos`
* Simplify the UTXO check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Further simplify and fix the UTXO check
- split each error case into a separate check
- combine `contains` and `insert`
- add a missing check against the non-finalized unspent UTXOs
- rename arguments and edit error strings for clarity
* Share test methods between check test modules
* Make some chain fields available to tests
* Make error field names consistent with transparent::Input
* WIP: Add tests for UTXO double-spends
- accept output and spend in the same block
- accept output and spend in a later block
- reject output and double-spend all in the same block
- reject output then double-spend in a later block
- reject output, spend, then double-spend all in different blocks
* Use Extend rather than multiple pushes
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Use Extend for more pushes
* Limit the number of proptest cases, to speed up tests
* Test rejection of UTXOs that were never in the chain
* Test rejection of spends of later transactions in the same block
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add sapling and orchard duplicate nullifier errors
* Reject duplicate finalized sapling and orchard nullifiers
Reject duplicate sapling and orchard nullifiers in a new block,
when the block is added to a non-finalized chain,
and the duplicate nullifier is already in the finalized state.
* Reject duplicate non-finalized sapling and orchard nullifiers
Reject duplicate sapling and orchard nullifiers in a new block,
when the block is added to a non-finalized chain,
and the duplicate nullifier is in:
* the same shielded data,
* the same transaction,
* the same block, or
* an earlier block in the non-finalized chain.
* Refactor sprout nullifier tests to remove common code
* Add sapling nullifier tests
Test that the state rejects duplicate sapling nullifiers in a new block,
when the block is added to a non-finalized chain,
and the duplicate nullifier is in:
* the same shielded data,
* the same transaction,
* the same block,
* an earlier block in the non-finalized chain, or
* the finalized state.
* Add orchard nullifier tests
Test that the state rejects duplicate orchard nullifiers in a new block,
when the block is added to a non-finalized chain,
and the duplicate nullifier is in:
* the same shielded data,
* the same transaction,
* the same block,
* an earlier block in the non-finalized chain, or
* the finalized state.
* Check for specific nullifiers in the state in tests
* Replace slices with vectors in arguments
* Remove redundant code and variables
* Simplify sapling TransferData tests
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Remove an extra :
* Remove redundant vec!
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add an OrderedUtxo type for validation of spends within a block
This change allows us to check that transparent spends use outputs from
earlier in their block. (But we don't actually do that check yet.)
We need to keep the order of UTXOs when we're contextually verifying
each new block that is added to a chain. But the block order is
irrelevant for UTXOs stored in the state.
* Take ownership in utxos_from_ordered_utxos
* Delete a confusing comment
* Document Ord for Chain and Proof of Work
* Create a NonFinalizedState::new method
And add some debug and clone derives.
* Test that block rejection restores internal non-finalized chain states
As part of this change, add `eq_internal_state` methods,
and proptests for them.
* Check that the chain's nullifiers are not modified on error
* Clarify a test description
* Refactor loop for readability
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix a variable name typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Reject duplicate sprout nullifiers in the state
* Improve docs and error messages
* Clarify "must be present" assert logs
* Move nullifier checks to their own module
Also:
* make non-finalized nullifier checks and errors generic over
sprout, sapling, and orchard
* create and update module and function documentation
* Fix a block type name in docs
* Move state assertions or skip them during tests
These changes enable state testing, while still asserting in production.
* Add sprout duplicate nullifier tests
* Improve comments
* Set value balance to 0 to pass future chain value pool checks
* Test finalized state in sprout nullifier accept test
* Replace assert with expect
* Improve assertion messages
* Document the new genesis transaction consensus rule
Zebra previously implemented this rule, but we documented it as a bug in
`zcashd`.
* Document the actual behaviour of zs_insert
* Use the block verifier and non-finalized state in the cached state tests
This substantially increases test coverage.
Previously, the cached state tests were configured with
`checkpoint_sync = true`, which only uses the checkpoint
verifier and the finalized state.
* Log the source of blocks in commit_finalized_direct
This lets us check that we're actually testing the non-finalized state
and block verifier in the cached state tests.
It also improves diagnostics for state errors.
* Fail cached state tests if they're using incorrect heights or configs
This makes sure that the cached state tests actually test the transition
from checkpoint to block verification, and the non-finalized state.
* Skip invalid legacy chain check test cases
Add proptest seeds for the failing test.
And improve some unclear documentation.
* Fix the legacy chain test blocks order
Also fix unclear documentation that might have led to this bug.
* Update versions for zebra v1.0.0-alpha.12 release
* Update Cargo.lock
* Update release checklist with latest version changes to help keep track for future releases
* Remove reference to the fact that tower-fallback was not updated
* add legacy chain check and tests
* improve has_network_upgrade check
* add docs to legacy_chain_check()
* change arbitrary module structure
* change the panic message
* move legacy chain acceptance into existing tests
* use a reduced_branch_id_strategy()
* add docs to strategy function
* add argument to check for legacy chain into sync_until()