dependabot[bot]
a58299a0f0
build(deps): bump color-eyre from 0.5.6 to 0.5.7
...
Bumps [color-eyre](https://github.com/yaahc/color-eyre ) from 0.5.6 to 0.5.7.
- [Release notes](https://github.com/yaahc/color-eyre/releases )
- [Changelog](https://github.com/yaahc/color-eyre/blob/master/CHANGELOG.md )
- [Commits](https://github.com/yaahc/color-eyre/compare/v0.5.6...v0.5.7 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-11-09 08:40:55 -05:00
dependabot[bot]
1e3cf6dc5c
build(deps): bump tracing-subscriber from 0.2.14 to 0.2.15
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.14 to 0.2.15.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.14...tracing-subscriber-0.2.15 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-11-04 20:37:40 -05:00
dependabot[bot]
785fc30481
build(deps): bump hyper from 0.13.8 to 0.13.9
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.8 to 0.13.9.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.8...v0.13.9 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-11-04 20:07:18 -05:00
Henry de Valence
253bab042e
sync: add a concurrency limit for block downloads
2020-10-26 12:05:35 -07:00
Henry de Valence
12d25159c6
zebrad: use hedged requests in sync
...
The hedge middleware implements hedged requests, as described in _The
Tail At Scale_. The idea is that we auto-tune our retry logic according
to the actual network conditions, pre-emptively retrying requests that
exceed some latency percentile. This would hopefully solve the problem
where our timeouts are too long on mainnet and too slow on testnet.
2020-10-26 12:05:35 -07:00
Henry de Valence
b90581a3d7
zebrad: create a Downloads Stream for syncing.
...
This makes two changes relative to the existing download code:
1. It uses a oneshot to attempt to cancel the download task after it
has started;
2. It encapsulates the download creation and cancellation logic into a
Downloads struct.
2020-10-26 12:05:35 -07:00
dependabot[bot]
ff51c2e0c0
build(deps): bump tracing-subscriber from 0.2.13 to 0.2.14
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.13 to 0.2.14.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.13...tracing-subscriber-0.2.14 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-10-23 15:02:02 -04:00
dependabot[bot]
76e7e3d714
build(deps): bump tracing-subscriber from 0.2.12 to 0.2.13
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.12 to 0.2.13.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.12...tracing-subscriber-0.2.13 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-10-08 15:09:32 -04:00
dependabot[bot]
23a62a2d87
build(deps): bump inferno from 0.10.0 to 0.10.1
...
Bumps [inferno](https://github.com/jonhoo/inferno ) from 0.10.0 to 0.10.1.
- [Release notes](https://github.com/jonhoo/inferno/releases )
- [Changelog](https://github.com/jonhoo/inferno/blob/master/CHANGELOG.md )
- [Commits](https://github.com/jonhoo/inferno/compare/v0.10.0...v0.10.1 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-10-06 05:31:01 -04:00
dependabot[bot]
d769f62a73
build(deps): bump color-eyre from 0.5.5 to 0.5.6
...
Bumps [color-eyre](https://github.com/yaahc/color-eyre ) from 0.5.5 to 0.5.6.
- [Release notes](https://github.com/yaahc/color-eyre/releases )
- [Changelog](https://github.com/yaahc/color-eyre/blob/master/CHANGELOG.md )
- [Commits](https://github.com/yaahc/color-eyre/compare/v0.5.5...v0.5.6 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-10-05 11:26:23 -04:00
Jane Lusby
40e22808c7
disable reporting url for timeout errors ( #1087 )
...
* disable reporting url for timeout errors
* revert newline removal
* switch to released color-eyre version
2020-09-21 16:15:09 -07:00
dependabot[bot]
85241a49d6
build(deps): bump hyper from 0.13.7 to 0.13.8
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.7 to 0.13.8.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.7...v0.13.8 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-09-21 11:58:31 -04:00
Jane Lusby
ca648ff27c
Enable issue-url feature in color-eyre ( #1072 )
...
* Enable issue-url feature in color-eyre
* get version automatically
* and the url!
2020-09-17 15:09:18 -07:00
dependabot[bot]
ba32d27f6e
build(deps): bump tracing-subscriber from 0.2.11 to 0.2.12 ( #1059 )
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.11 to 0.2.12.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.11...tracing-subscriber-0.2.12 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2020-09-14 13:49:07 -07:00
Ramana Venkata
991c70723a
zebrad: Create zebrad.toml in acceptance tests from ZebradConfig
...
Fixes #929
2020-08-23 21:24:19 -04:00
dependabot[bot]
945b019739
build(deps): bump tracing-subscriber from 0.2.10 to 0.2.11 ( #873 )
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.10 to 0.2.11.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.10...tracing-subscriber-0.2.11 )
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2020-08-11 10:30:50 -07:00
Henry de Valence
a77328ad7c
Refactor tracing components ( #834 )
...
* Split tracing component code into modules.
* Repatriate Tracing and simplify config handling.
We upstreamed our Tracing component, expecting not to have to exert fine
control over the tracing settings. But this turned out not to be the case, and
now that we want to do other things (flamegraphs, journalctl, opentelemetry,
etc), we end up with really awkward code (as in the current flamegraph
handling).
This also makes use of the changes to `init()` to load the config early to pass
configuration data into the components, which avoids the need for the
refactoring in #775 .
Finally, we restore support for the `-v` flag when the filter is unset. Closes #831 .
* Disable tracing and metrics endpoints by default.
Closes #660 .
* Switch back to upstream Abscissa.
* Integrate flamegraph support into the new Tracing component.
* Pass -v in acceptance tests to get info-level output.
* Clean up acceptance test code.
2020-08-06 10:29:31 -07:00
Jane Lusby
867dd0b475
Setup tracing-flame for use profiling zebrad ( #436 )
...
* Setup tracing-flame for use profiling zebrad
* start work on conditional flamegraph generation
* review time!
* update comments
* Update Cargo.toml
* disable default features for inferno
* reorganize
* missing one trait
* Apply suggestions from code review
* graceful shutdown!
* remove special case handling on ctrlc for cleanup
* rename signal fn to better represent its responsibility
* remove unused global hook for flushing flamegraph
* move tracing logic to the right file
* just copy linkerd's signal handling logic
* update book
* make zebrad app drop on shutdown normally
* Update zebrad/src/components/tokio.rs
Co-authored-by: teor <teor@riseup.net>
* Update zebrad/src/application.rs
Co-authored-by: teor <teor@riseup.net>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* cleanup a little
* ooh yea there's an API for that
* setup env-filter for backup subscriber
* document env filter
* document return codes
* forgot to save
* Update book/src/applications/zebrad.md
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
2020-08-05 16:35:56 -07:00
dependabot[bot]
8e268150a7
build(deps): bump tracing-subscriber from 0.2.9 to 0.2.10
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.9 to 0.2.10.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.9...tracing-subscriber-0.2.10 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-08-03 21:11:50 -04:00
Alfredo Garcia
f2d7bb3177
Command execution tests ( #690 )
...
* add zebrad acceptance tests
* add custom command test helpers that work with kill
* add and use info event for start and seed commands
* combine conflicting tests into one test case
Co-authored-by: Jane Lusby <jane@zfnd.org>
2020-08-01 16:15:26 +10:00
Henry de Valence
4aa00ad216
Align crate versions and user-agent with NU numbers.
...
We had a brief discussion on discord and it seemed like we had consensus on the
following versioning policy:
* zebrad: match major version to NU version, so we will start by releasing
zebrad 3.0.0;
* zebra-* libraries: start by matching zebrad's version, then increment major
versions of each library as we need to make breaking changes (potentially
faster than the zebrad version, always respecting semver but making no
guarantees about the longevity of major releases).
This commit sets all of the crate versions to 3.0.0-alpha.0 -- the -alpha.0
marks it as a prerelease not subject to perfect adherence to compatibility
guarantees.
2020-07-24 11:46:37 -07:00
dependabot[bot]
f7c59c99b5
build(deps): bump tracing-subscriber from 0.2.8 to 0.2.9
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.8 to 0.2.9.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.8...tracing-subscriber-0.2.9 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-07-24 14:31:44 -04:00
Jane Lusby
c1a1493159
use dirs crate for default location of state and config ( #714 )
...
* use dirs crate for default location of state and config
* panic if a path isn't specified for zebra-state
2020-07-23 21:12:20 +10:00
Jane Lusby
a722cf33f7
enable new tracing instrumentation in tokio
2020-07-22 14:39:54 -04:00
dependabot[bot]
2208a6a22d
build(deps): bump tracing-subscriber from 0.2.7 to 0.2.8
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.7 to 0.2.8.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.7...tracing-subscriber-0.2.8 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-07-21 12:01:40 -04:00
dependabot[bot]
c3fcac8a5c
Bump hyper from 0.13.6 to 0.13.7
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.6 to 0.13.7.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.6...v0.13.7 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-07-14 10:40:53 -07:00
teor
e1bb95603c
Put zebrad/Cargo.toml in a nicer order ( #650 )
2020-07-14 10:17:05 -07:00
dependabot[bot]
a1d02c2606
Bump tracing-subscriber from 0.2.6 to 0.2.7
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.6 to 0.2.7.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.6...tracing-subscriber-0.2.7 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-07-02 06:47:04 -04:00
Jane Lusby
7245d91fe9
fix block downloading to be parallelized and commited via the verifier ( #540 )
2020-06-30 09:42:09 -07:00
Henry de Valence
70241d3cad
Fix broken git dependencies.
...
Pinning hashes means these won't break again in the future; they can always be updated.
2020-06-22 20:23:02 -07:00
Jane Lusby
246e7cd2a9
Start testing out new version of `eyre` and `color-eyre` in zebra ( #526 )
...
* port to new version of eyre without generics
* correctly setup color_eyre hooks
Co-authored-by: Jane Lusby <jane@zfnd.org>
2020-06-22 15:36:23 -07:00
dependabot[bot]
f301de41fa
Bump tracing-subscriber from 0.2.5 to 0.2.6
...
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing ) from 0.2.5 to 0.2.6.
- [Release notes](https://github.com/tokio-rs/tracing/releases )
- [Commits](https://github.com/tokio-rs/tracing/compare/tracing-subscriber/-0.2.5...tracing-subscriber-0.2.6 )
Signed-off-by: dependabot[bot] <support@github.com>
2020-06-22 12:01:47 -04:00
Jane Lusby
431f194c0f
propagate errors out of zebra_network::init ( #435 )
...
Prior to this change, the service returned by `zebra_network::init` would spawn background tasks that could silently fail, causing unexpected errors in the zebra_network service.
This change modifies the `PeerSet` that backs `zebra_network::init` to store all of the `JoinHandle`s for each background task it depends on. The `PeerSet` then checks this set of futures to see if any of them have exited with an error or a panic, and if they have it returns the error as part of `poll_ready`.
2020-06-09 12:24:28 -07:00
Deirdre Connolly
42cc55b0bb
Remove testing tokio task
...
That fires 'GetPeers' requests at our running 'zebra seed'.
2020-06-08 19:26:23 -04:00
Deirdre Connolly
8f5e7c268b
Request::Peers not GetPeers
2020-06-08 19:26:23 -04:00
Jane Lusby
18b4dbc16c
fix tracing configuration issues ( #432 )
2020-06-04 19:34:06 -07:00
dependabot-preview[bot]
07b7c711fb
Bump color-eyre from 0.3.2 to 0.3.4
...
Bumps [color-eyre](https://github.com/yaahc/color-eyre ) from 0.3.2 to 0.3.4.
- [Release notes](https://github.com/yaahc/color-eyre/releases )
- [Commits](https://github.com/yaahc/color-eyre/commits )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-06-02 22:55:02 -04:00
Jane Lusby
e9af80b875
Add initial version of zebra-state ( #414 )
...
* rename zebra-storage to zebra-state
* Setup initial skeleton for zebra-state
* add test
* Apply suggestions from code review
Co-authored-by: Henry de Valence <hdevalence@hdevalence.ca>
* move shared test vectors to a common crate
Co-authored-by: Jane Lusby <jane@zfnd.org>
Co-authored-by: Henry de Valence <hdevalence@hdevalence.ca>
2020-06-02 16:16:17 -07:00
dependabot-preview[bot]
8e7d91b4a3
Bump eyre from 0.4.2 to 0.4.3
...
Bumps [eyre](https://github.com/yaahc/eyre ) from 0.4.2 to 0.4.3.
- [Release notes](https://github.com/yaahc/eyre/releases )
- [Commits](https://github.com/yaahc/eyre/commits )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-06-02 18:48:50 -04:00
dependabot-preview[bot]
a62b93d47c
Bump hyper from 0.13.5 to 0.13.6
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.5 to 0.13.6.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.5...v0.13.6 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-05-30 00:29:05 -04:00
Jane Lusby
da72c5a86a
switch from abscissa::Context to color-eyre ( #409 )
...
Co-authored-by: Jane Lusby <jane@zfnd.org>
2020-05-28 23:01:24 -04:00
dependabot-preview[bot]
46cb7c02f2
Bump once_cell from 1.3.1 to 1.4.0
...
Bumps [once_cell](https://github.com/matklad/once_cell ) from 1.3.1 to 1.4.0.
- [Release notes](https://github.com/matklad/once_cell/releases )
- [Changelog](https://github.com/matklad/once_cell/blob/master/CHANGELOG.md )
- [Commits](https://github.com/matklad/once_cell/compare/v1.3.1...v1.4.0 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-05-13 22:28:18 -04:00
dependabot-preview[bot]
83ee4c2ca3
Bump hyper from 0.13.4 to 0.13.5
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.4 to 0.13.5.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.4...v0.13.5 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-04-18 08:43:40 +00:00
dependabot-preview[bot]
6867449ff4
Bump hyper from 0.13.3 to 0.13.4
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.3 to 0.13.4.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.3...v0.13.4 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-03-20 21:05:17 -04:00
dependabot-preview[bot]
cf0348b4f5
Bump hyper from 0.13.2 to 0.13.3
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.2 to 0.13.3.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.2...v0.13.3 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-03-03 20:16:27 -05:00
Henry de Valence
75d3d44fb3
Metrics MVP: add two metrics and export them to Prometheus.
...
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
2020-02-14 20:14:05 -05:00
Henry de Valence
9273f83761
Remove tracing-subscriber.
...
We don't need to handle the subscriber directly since we upstreamed this
functionality into Abscissa.
2020-02-05 14:05:46 -08:00
dependabot-preview[bot]
dd24dbece3
Bump hyper from 0.13.1 to 0.13.2
...
Bumps [hyper](https://github.com/hyperium/hyper ) from 0.13.1 to 0.13.2.
- [Release notes](https://github.com/hyperium/hyper/releases )
- [Changelog](https://github.com/hyperium/hyper/blob/master/CHANGELOG.md )
- [Commits](https://github.com/hyperium/hyper/compare/v0.13.1...v0.13.2 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-01-29 17:25:34 -05:00
dependabot-preview[bot]
dbe7427f58
Bump once_cell from 1.3.0 to 1.3.1
...
Bumps [once_cell](https://github.com/matklad/once_cell ) from 1.3.0 to 1.3.1.
- [Release notes](https://github.com/matklad/once_cell/releases )
- [Changelog](https://github.com/matklad/once_cell/blob/master/CHANGELOG.md )
- [Commits](https://github.com/matklad/once_cell/compare/v1.3.0...v1.3.1 )
Signed-off-by: dependabot-preview[bot] <support@dependabot.com>
2020-01-18 23:26:25 -05:00
Tony Arcieri
45eb81a204
Upgrade to Abscissa v0.5
2020-01-15 12:06:31 -08:00