* Update the workflow run conditions for CI docker tests
* Run release builds and release Docker image tests on pull requests
* Remove the manual docker test from the release checklist
* Fix workflow syntax
* Use the right kind of quotes
* ci(tests): just run the full sync weekly
This change allows to run the Zebra full sync test every Friday at mid-day UTC.
* fix: also run Testnet & LWD full sync only on schedule
* chore: remove not needed file
* chore: fix wording and comments
Co-authored-by: teor <teor@riseup.net>
---------
Co-authored-by: teor <teor@riseup.net>
* Stop running multiple full syncs on different branches
* Fully fix concurrency, and require found cache or generated cache
* Use correct syntax and job dependencies
* Split checking for cached state disks into its own workflow
* Fix workflow field order
* Run the top-level workflow when the reusable workflow changes
* And run dependent workflows for pull requests as well
* Remove redundant output names
* Document the existing and new workflow jobs
* Add the network to the "no disk found" message
* Tweak existing docs and descriptions
* Generate Zebra checkpoints on testnet
* Add a full sync testnet entrypoint, and simplify mainnet env vars
* Only run the full testnet sync on the main branch
* Deduplicate and update the zebra-checkpoints docs
* Add instructions for automatic checkpoint generation
* Hide some details in the release checklist
* Update release checkpoint instructions to use CI
* Only update the cache in one job on mainnet
* Split checking for cached state disks into its own workflow
* Fix workflow field order
* Run the top-level workflow when the reusable workflow changes
* And run dependent workflows for pull requests as well
* Remove redundant output names
* Document the existing and new workflow jobs
* Add the network to the "no disk found" message
* Add extra test type modes to support zebra-checkpoints
* Add Mainnet and Testnet zebra-checkpoints test harnesses
* Add zebra-checkpoints to test docker images
* Add zebra-checkpoints test entrypoints
* Add Mainnet CI workflow for zebra-checkpoints
* Enable zebra-checkpoints feature in the test image
* Use the same features for (almost) all the docker tests
* Make workflow features match Docker features
* Add a feature note
* Add a zebra-checkpoints test feature to zebrad
* Remove the "no cached state" testnet code
* Log a startup message to standard error when launching zebra-checkpoints
* Rename tests to avoid partial name conflicts
* Fix log formatting
* Add sentry feature to experimental docker image build
* Explain what ENTRYPOINT_FEATURES is used for
* Use the correct zebra-checkpoints path
* Silence zebrad logs while generating checkpoints
* Fix zebra-checkpoints log handling
* Re-enable waiting for zebrad to fully sync
* Add documentation for how to run these tests individually
* Start generating checkpoints from the last compiled-in checkpoint
* Fix clippy lints
* Revert changes to TestType
* Wait for all the checkpoints before finishing
* Add more stderr debugging to zebra-checkpoints
* Fix an outdated module comment
* Add a workaround for zebra-checkpoints launch/run issues
* Use temp dir and log what it is
* Log extra metadata about the zebra-checkpoints binary
* Add note about unstable feature -Z bindeps
* Temporarily make the test run faster and with debug info
* Log the original test command name when showing stdout and stderr
* Try zebra-checkpoints in the system path first, then the cargo path
* Fix slow thread close bug in dual process test harness
* If the logs are shown, don't say they are hidden
* Run `zebra-checkpoints --help` to work out what's going on in CI
* Build `zebra-utils` binaries for `zebrad` integration tests
* Revert temporary debugging changes
* Revert changes that were moved to another PR
* refactor(ci): use GitHub secrets and variables
We've been using values that are variable across multiple workflows,
and those can only be changed if modifying the workflows, but we should
be able to change the values without committing new changes in the code
for this purpose we're now using GitHub Variables, and even moving
non-sensitive information into variables instead of secrets. Allowing
more flexibility and other scenarios that should be easier to manage,
like deploying to Mainnet or Testnet.
* refactor(ci): use new GitHub variables for GCP auth
* fix(ci): typo
* fix(ci): do not use multiple variables for the same value
* fix(ci): typo in variable
* fix(vars): use different variables for machine types
* fix(vars): missing substitution
* fix: typo
* fix: make the input CI network override the default network
* Use the correct network variable for creating disks
---------
Co-authored-by: teor <teor@riseup.net>
* ci(lwd): run the send transactions test on each PR update
The send transactions test was moved to the main branch in #5480 because
it was very slow.
It's much faster (~30m) with #5015 and now it can be run for every PR
update again.
* fix(actions): remove references to the workflow_dispatch
* ci: add a test to validate Zebra's config file and path
* fix: use `ZEBRA_CONF_PATH` as single variable locating the conf
* fix: do not remove the containers
* fix: use extended regex
* fix: use different steps to validate the conf tests
* fix: do not specify a default CMD for running Docker in test builds
* fix: use actual starting commands for entrypoint
* fix: do not add cargo twice if cargo is in $1
* fix: allow to run `zebrad` in the `tests` stage of Dockerfile
* fix: new entrypoint does not allow an empty CMD
* fix: do not duplicate the `zebrad` command
* fix: segregate configuration jobs
* refactor(entrypoint): handle better parameters conditions
* fix: make `zebrad` an executable command in `tests` stage
* Show the commands that are being executed in the new docker test
* Show full logs without tee or grep
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fix: use the actual path inside docker
* fix: use `grep` with exit code
If the container is logging to stderr, piping works only for stdout, so we're adding `2>&1`
* fix: use `grep -q` to get an exit code
* fix: fail if any error is detected
* fix: fail if this test takes more than 5 minutes
* fix: update patch workflows
* feat: test Dockerfile `runtime` config
* fix: depend on the configuration test to continue
Co-authored-by: teor <teor@riseup.net>
* Re-apply: add acceptance test for getblocktemplate method in CI (#5653)
Revert "Revert "change(tests): add acceptance test for getblocktemplate method in CI (#5653)" (#5672)"
This reverts commit 6446e0ec1b.
* Fix incorrect MAX_CONTEXT_BLOCKS assertion in state
* Actually negate the miner fee for the RPC output
* Try the RPC again after waiting for transactions to verify
* Log before the test waits for the mempool to verify transactions
* Use the new ssh key secrets in CI
* adds test for getblocktemplate rpc method
* adds the new test to CI
* adds a couple logs
* Adds example for running the test in acceptance.rs
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Previous behavior:
`gcloud` commands have been running without an appropiate authentication
as the `auth` auction was sucessfully executed, but the actual gcloud
CLI being used in further jobs was not using the correct configuration
nor credentials
Expected behavior:
All `gcloud` commands should be properly configured and authenticated.
Solution:
Add the `google-github-actions/setup-gcloud` action after each
`google-github-actions/auth` invocation, and before running any `gcloud`
command.
Remove the need of an OAuth Access token when not required by following
steps
* updates mod docs for tests that use future blocks
* updates submitblock test to use TestType methods
* prunes redundant code
* adds check_sync_logs_until
* adds assertion for needs cached state & rpc server
* updates get_raw_future_blocks fn with rpc calls
* updates to get_raw_future_blocks fn and submit_block test
* Rename LightwalletdTestType to TestType
* moves TestType and random_known_rpc_port_config to test_type.rs and config.rs
* moves get_raw_future_blocks to cached_state.rs
* updates ci workflows to include submit block test
* adds get_future_blocks fn and uses it in load_transactions_from_future_blocks
* updates CI docker
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Applies suggestions from code review
* Updates misnamed closure param
* updates mod docs for test_type.rs
Co-authored-by: teor <teor@riseup.net>
* Use correct release for getblocktemplate config
* Include at least 2 full checkpoints in the lookahead limit
* Increase full sync timeout to 36 hours
* Only log "synced block height too far ahead of the tip" once
* Replace AboveLookaheadHeightLimit error with pausing the syncer
* Use AboveLookaheadHeightLimit for blocks a very long way from the tip
* Also add the getblocktemplate config, and fix the test message
* Remove an outdated TODO comment
* Allow syncing again when a small number of blocks are in the queue
* Allow some dead code
* Only run multiple test jobs if they are needed for a long test
* Remove unused job steps
* Remove trailing whitespace
* Follow logs in the Run step
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Run CI jobs on dependent PRs
* Change job names to be unique
* Fix outdated workflow name
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Make "test all" log output shorter
* Use different docker instance names
* Spell out command-line arguments
* Fix option names
* Use nocapture on basic tests but not ignored tests
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* only run the send transaction test on the main branch
* adds patch job
* Add concurrency rule to the send transactions test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Allow send tx test to be triggered manually
Co-authored-by: teor <teor@riseup.net>
* test all features
* increase task timeout
* add a new task for feature tests
* add `getblocktemplate-rpcs` tests to docker integration
* run the getblocktemplate-rpcs feature as a separated step in docker
* move getblocktemplate-rpcs in docker as a separated task
* ci(sync): only run the `lightwalletd` full sync on the `main` branch
Previous behavior:
In PR #5164, we made lightwalletd sync all the way to the tip in its full
sync test.
This increases that test's time from 1 hour to 4 hours, which makes the CI
we run on each PR change increase from 3 hours to 6 hours.
Expected behavior:
Run the lightwalletd full sync just on `main` or if a state disk for the
actual version is not found.
Solution:
Add the `github.event_name == 'push' && github.ref_name == 'main'` condition
to the `lightwalletd-full-sync` test.
Fixes#5316
* Allow lwd full syncs to be triggered manually (#5400)
* Limit checkpoint and lwd full sync concurrency
* Add a patch job for lightwalletd-full-sync
Co-authored-by: teor <teor@riseup.net>
* Revert "ci(ssh): connect using `ssh-compute` action by Google (#5330)"
This reverts commit b366d6e7bb.
* ci(ssh): use sudo for docker commands if user is not root
* ci(ssh): specify the service account to connect with
* ci(ssh): increase the Google Cloud instance sshd connection limit
* chore: add a new line at the end of the script
* chore: update our VM image to bullseye
* chore: fix `tj-actions/changed-files` file comparison
* refactor(ssh): connect using `ssh-compute` action by Google
Previous behavior:
From time to time SSH connections to deployed VMs fails with the following
error: `kex_exchange_identification: Connection closed by remote host`
This was still happening after implementing https://github.com/ZcashFoundation/zebra/pull/5292
Excpected behavior:
Ensure we're not creating SSH key pairs on the fly to improve our connections
guarantees
Solution:
- Enable the Cloud Identity-Aware Proxy API in GCP
- Create a firewall rule to enable connections from IAP
- Grant the required IAM permissions to enable IAP TCP forwarding
- Generate an SSH keys pair and set a private key as an input param
- Set the GitHub Action SA to have authorized ssh connection to the VMs
- Implement the `google-github-actions/ssh-compute` action to connect
* fix(ssh): id `compute-ssh` cannot be used more than once within the same scope
* fix(ci): try to enclose commands to override parsing issues
* tmp: remove ssh_args
* fix(action): secrets must be inherited to be used
* tmp: validate command enclosing fixes executin
* fix(ssh): ssh_args are not implemented correctly
* fix(ssh): login with the root user
* fix(privelege): uso sudo with docker commands
* tmp: add sudo
* fix(ssh): use sudo for all docker commands
* fix(ssh): add missing `sudo` commands
* fix(ssh): get sync height from ssh stdout
* fix(height): get the height correctly
* Increase search range for sync height
* Update sync height regexes for zebrad and lwd cached states
* Add labels to cached state images
* Update deploy-gcp-tests.yml
* Don't create new cached states for lwd updates
* Add a missing line continuation
* Fix a comment
* Revert a mistaken comment change
* Clarify a TODO comment
* Partially revert to old docker height log handling
* Use an output for the cached disk name
* Increase search range for sync height
* Update sync height regexes for zebrad and lwd cached states
* Add labels to cached state images
* Add a missing line continuation
teor
Gustavo Valverde
dependabot[bot]
Pili Guerra
Arya
Alfredo Garcia