* Move NoChainTip to a test-only module
* Move test-only ChainSyncStatus code into its own module
* Move RecentSyncLengths mocks to their own module
* Silence an unused test code lint
* Actually, NoChainTip is used in production for isolated connections
* Split the conventional fee check into its own method
This will be used for block production and relaying
* Move getblocktemplate transaction selection into a new zip317 module
* Add a block_production_fee_weight field to VerifiedUnminedTx
* Add a custom Zebra minimum transaction weight for block production
* Implement ZIP-317 transaction selection for block production
* Split weighted index setup into its own function
* Split picking a transaction into its own function
* Re-apply: add acceptance test for getblocktemplate method in CI (#5653)
Revert "Revert "change(tests): add acceptance test for getblocktemplate method in CI (#5653)" (#5672)"
This reverts commit 6446e0ec1b.
* Fix incorrect MAX_CONTEXT_BLOCKS assertion in state
* Actually negate the miner fee for the RPC output
* Try the RPC again after waiting for transactions to verify
* Log before the test waits for the mempool to verify transactions
* Use the new ssh key secrets in CI
* Remove an unused async track_caller which will soon become a warning
* Explicitly drop unused futures
* Work around a compiler panic (ICE) with flat_map()
https://github.com/rust-lang/rust/issues/105044
* Remove a redundant into_iter()
* allow(clippy::needless_collect)
* updates comments
* adds check nullifier no dup fns for transactions
* Adds:
- check::anchors fn for tx iter
- TODO comments for unifying nullifiers and anchors checks
- new state request
Updates unknown anchor errors to accomodate tx-only check
Calls new state fn from transaction verifier
* updates check::anchors fns to use transactions
updates TransactionContextualValidity request to check sprout anchors
adds comment mentioning TransactionContextualValidity ignores UTXOs
* conditions new state req call on is_mempool
updates tests
* fix doc link / lint error
* checks for duplicate nullifiers with closures
* Update zebra-state/src/service/check/nullifier.rs
Co-authored-by: teor <teor@riseup.net>
* documents find_duplicate_nullifier params
moves if let statement into for loop
* renames new state req/res
* asserts correct response variant in tx verifier
* adds CheckBestChainTipShieldedSpends call in tx verifier to async checks
* re-adds tracing instrumentation to check::anchors fn
renames transaction_in_state to transaction_in_chain
* adds block/tx wrapper fns for anchors checks
* uses UnminedTx instead of transaction.hash()
deletes broken test
* updates new state req/res name
* updates tests and uses par_iter for anchors checks
* Updates check::anchors pub fn docs.
* Adds:
- comments / docs
- a TransactionError variant for ValidateContextError
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* moves downcast to From impl
rustfmt
* moves the ValidateContextError into an Arc
updates comments and naming
* leaves par_iter for another PR
* puts io::Error in an Arc
* updates anchors tests to call tx_anchors check
* updates tests to call tx_no_duplicates_in_chain
slightly improves formatting
* Update zebra-consensus/src/error.rs
Co-authored-by: teor <teor@riseup.net>
* moves Arc from HistoryError to ValidateContextError
Co-authored-by: teor <teor@riseup.net>
* populate block height
* populate cur_time
* populate min_time
* populate capabilities
* populate last_block_hash
* create read state request for getblocktemplate
* refactor to get difficulty fields more properly
* populate bits and target fields
* fix tests
* add target and bits documentation
* docs
* fix docs
* docs
* remove metrixs counter calls
* apply some suggestions from code review
* hide some code behind feature
* simplify the service
* fix error handling
* remove comment
* fox doc
* panic if we dont have enough state
* bring tip data from the state
* make proposal empty
* fix time
* fix docs, consensus rules
* remove non used anymore fn
* remove another non used fn
* remove no needed change
* remove more unused changes
* remove unused anymore change
* apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* fix build and snapshots
* apply testnet consensus rule
* fix test
* rustfmt
* remove time as allowed field to be modified by the miner if mining minimum difficulty block
* move all times to before calculating difficulty
* do some cleanup
* Adjust times so the whole time range is a testnet minimum difficulty block
* Return a GetBlockTemplateChainInfo struct from the difficulty calculation
* Add a Zebra-only max_time field to the getblocktemplate RPC
Co-authored-by: teor <teor@riseup.net>
* Add a ZIP-317 conventional fee module
* Add a conventional fee calculation stub, and use it for mempool size limiting
* Just return a usize from zcash_serialized_size(), removing the unused Result
* Add ZIP-317 constants
* Calculate the ZIP-317 conventional fee
* Update tests
* Add a CHANGELOG entry
* Fix a comment typo
Co-authored-by: Daira Hopwood <daira@jacaranda.org>
* Fix some missing words in a comment
Co-authored-by: Arya <aryasolhi@gmail.com>
Co-authored-by: Daira Hopwood <daira@jacaranda.org>
Co-authored-by: Arya <aryasolhi@gmail.com>
* bump zcash_proofs from 0.8.0 to 0.9.0
bump zcash_primitives from 0.8.0 to 0.9.0
* update deny.toml to skip zcash_primitives 0.8.1
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Returns error from getblocktemplate if not synced
* sets max estimated distance to 1
* removes unnecessary calls to best_tip_height
adds info log when estimated_distance_to_chain_tip is too high
* trigger GitHub actions
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Uses BestChainUtxo to find utxos for mempool
* adds missing input test
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* update other instances of the renamed InputNotFound error
* adds read::unspent_utxo fn
* adds test for success case
Co-authored-by: teor <teor@riseup.net>
* Add a getblocktemplate-rpcs feature to zebra-chain, and fix missing feature deps
* Add a coinbase transaction creation stub
* Add coinbase creation to zebra-chain
* Add coinbase creation and miner subsidy to zebra-consensus
* Add the miner config to the GetBlockTemplateRpcImpl
* Generate the coinbase transaction in the getblocktemplate RPC
* Provide fake valid block heights to getblocktemplate RPC tests
* Update getblocktemplate RPC snapshots
* Add a getblocktemplate.coinbase_tx deserialized transaction snapshot test
* Update snapshots
* Return funding stream outputs in the same order every time
* Update snapshots
* Fix a script bytes bug
* Update snapshots
* Split out a select_mempool_transactions() function
* Add some TODOs
* Cleanup redundant dependencies
* Draft conversion from coinbase Transactions into TransactionTemplates
* Document a non-coinbase requirement for remaining_transaction_balance()
* Add a Network field to the getblocktemplate RPC handler
* Clarify an error message
* Re-raise panics in the getblocktemplate task, for better debugging
* Fix how the fake coinbase transaction is created
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Clean up references to fpe that were not removed when we removed orchard code
* Update Cargo.lock
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add a legacy_sigop_count field to VerifiedUnminedTx
* Add conversions from Vec<VerifiedUnminedTx> to block header roots
* Add fee and sigops field to block template transactions
* Fix up mempool request names
* Increase existing snapshot test coverage
* Document a new method parameter
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Add documentation for the getblocktemplate RPC
* Add a new mempool::Request::Transactions
* Add conversions from Vec<UnminedTx> to merkle::Root and AuthDataRoot
* Fill in the merkle root and auth data root fields
* Delete the Coinbase type, it's the same as Transaction
* Fill in some other existing types
* Add Hex serialization support to some zebra-chain types
* Add TransactionTemplate fields and fill some in
* Fix test hangs by spawning async tasks
* Add temporary workaround for no transactions in the block
* Encode hashes and roots as hex
* Update RPC snapshots
* Add a missing Request::Transactions handler
* Fix doc warnings
* Fix fee serialization
* Update snapshots for serialization changes
* Add a missing Cargo.lock change
* Change depends type
* Remove duplicate feature entry
* Document the new RPC feature
* Fix a comment typo
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update default roots docs
* Fix comment typo
* Fix a comment typo
Co-authored-by: Arya <aryasolhi@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: Arya <aryasolhi@gmail.com>
* Bump zcash_primitives, zcash_note_encryption and oechard deps at once
* Bump dependencies, and update `deny.toml`
* Upgrade to zcash_script 0.1.8
* Update Cargo.lock
* Use 3-part version numbers consistently
* Get address by serializing the Output, then using zcash_primitives to parse it (#5507)
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: teor <teor@riseup.net>
* Put `tor` behind its own `--cfg` flag
* Bump x25519-dalek from 1.2.0 to 2.0.0-pre.1
* Bump zcash_proofs to 0.8.0
* Update `deny.toml`
* Update `Cargo.lock`
* Fix missing doc link warning
* Mention a ticket that tracks the dep. conflict
* Update `.codespellrc`
* Disable the other tor dependency
* Clarify a comment
* Add Tor x25519-dalek issue to README
* Update Cargo.lock
Co-authored-by: teor <teor@riseup.net>
* Fix clippy cast and closure warnings
* Silence incorrect lints in Clippy 1.64
* Use correct clippy syntax
Co-authored-by: Marek <mail@marek.onl>
* Disable an incorrect Clippy 1.64 lint
* Disable lint on the correct code
* Try another place
Co-authored-by: Marek <mail@marek.onl>
* Increment Zebra versions
* Initial draft changelog
* Add blog post to the release checklist
* Say "user testing"
Co-authored-by: teor <teor@riseup.net>
* add grpc mempool test research
* add a config flag for mempool injection of transactions in test
* Only copy the inner state directory in the send transactions test
* Preload Zcash parameters in some transaction verification tests
* Add a block and transaction Hash method to convert from display order bytes
* Update test coverage docs
* Add debugging output for mempool transaction verification
* Test fetching sent mempool transactions using gRPC
* Add extra log checks to the send transaction test
* Wait for zebrad mempool activation before running gRPC tests
* Update send transaction test for lightwalletd not returning mempool transactions
* Check zebrad logs instead of disabled lightwalletd gRPCs
* Add a debug option that makes RPCs pretend the sync is finished
* Remove an unused debug option
* Remove unused test code and downgrade some logs
* Fix test log checks
* Fix some rustdoc warnings
* Fix a compilation error due to new function arguments
* Make zebrad sync timeouts consistent and remove outdated code
* Document how to increase temporary directory space for tests
* Stop checking for a log that doesn't always happen
* Remove some commented-out code
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Update a comment about run time
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Add new config to new tests from the `main` branch
* Add transactions to the list, rather than replacing the list with each new block
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Rename a function to prepare_block_header_and_transaction_data_batch()
* Fix formatting of test command timeouts and child process output
* Put some #[cfg()]s in the standard Rust location
* Update some test timings
* Allow code timers to be ignored
* Add history trees for each height in non-fin state
* Refactor formatting
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* update zebra to 1.0.0-beta.13
* add changelog
* update the release date
* Update changelog for cryptographic batch PRs
* Add `bitvec` to the changelog
* Update CHANGELOG.md
* Add zebra-network fix and tokio version bump
* Recommend that users update their rust compiler
* Update disk and network usage for recent large blocks
* Fix spacing
* Add disk and network usage update to README
* apply size suggestions
Co-authored-by: teor <teor@riseup.net>
* add known performance issues
* update changelog
* change release date
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Make code execution time logs shorter
* Do ZK parameter preloads in the lightwalletd tests that need them
* Try to re-launch `lightwalletd` when it hangs during sync tests
* Increase full sync timeout
* Clear the `zebrad` logs during `lightwalletd` tests, to avoid logging deadlocks
* Actually clear more than one line of logs
* Check zebrad and lightwalletd output in parallel threads, while waiting for zebrad
* Check zebrad and lightwalletd output in parallel threads, while waiting for lightwalletd
* Improve test logging
* Fix a log typo
* Only wait for lightwalletd once, because its logs stop after the initial sync
* Look for cached state disks for this commit and branch first
* Only copy the state once in the send transactions test
* Wait longer for lightwalletd gRPC server startup
* Add some function docs
* cargo fmt --all
* Fix clippy::let_and_return
* Increase lightwalletd test timeouts for zebrad slowness
* Add a `zebrad_update_sync()` test, that update syncs Zebra without lightwalletd
* Run the zebrad-update-sync test in CI
* Add extra zebrad time to workaround lightwalletd bugs
* Add a CodeTimer diagnostic struct for long-running code
* Time state init and each state request, log when it takes too long
* Add code locations to execution timers
* Instrument state futures and functions with tracing spans
* Only log each code timer once
* Make displayed times shorter
* Split disk reads from CPU-heavy Sprout interstitial tree cryptography
* Improve anchor validation debugging and error messages
* Work around a test data bug, and save some CPU
* Remove redundant checks for empty shielded data
* Skip generating unused interstitial treestates
* Do disk fetches and quick checks, then CPU-heavy cryptography
* Wrap HistoryTree in an Arc in the state
* Run CPU-intensive chain validation and updates in parallel rayon threads
* Refactor to prepare for parallel tree root calculations
* Run finalized state note commitment tree root updates in parallel rayon threads
* Update finalized state note commitment trees using parallel rayon threads
* Fix a comment typo and add a TODO
* Split sprout treestate fetch into its own function
* Move parallel note commitment trees to zebra-chain
* Re-calculate the tree roots in the same parallel batches
* Do non-finalized note commitment tree updates in parallel threads
* Update comments about note commitment tree rebuilds
* Do post-fork tree updates in parallel threads
* Add a TODO for parallel tree updates in tests
* Fix broken intra-doc links
* Clarify documentation for sprout treestates
* Spawn large database reads into blocking tokio threads
* Concurrently read all blocks, headers, and transactions from disk
* Run zebra-state transaction deserialization on a rayon thread
* Split disk reads from CPU-heavy Sprout interstitial tree cryptography
* Improve anchor validation debugging and error messages
* Work around a test data bug, and save some CPU
* Remove redundant checks for empty shielded data
* Skip generating unused interstitial treestates
* Do disk fetches and quick checks, then CPU-heavy cryptography
* Wrap HistoryTree in an Arc in the state
* Run CPU-intensive chain validation and updates in parallel rayon threads
* Refactor to prepare for parallel tree root calculations
* Run finalized state note commitment tree root updates in parallel rayon threads
* Update finalized state note commitment trees using parallel rayon threads
* Fix a comment typo and add a TODO
* Split sprout treestate fetch into its own function
* Move parallel note commitment trees to zebra-chain
* Re-calculate the tree roots in the same parallel batches
* Do non-finalized note commitment tree updates in parallel threads
* Update comments about note commitment tree rebuilds
* Do post-fork tree updates in parallel threads
* Add a TODO for parallel tree updates in tests
* Fix broken intra-doc links
* Clarify documentation for sprout treestates
* Sort Cargo.toml dependencies
* Update comments about note commitment tree rebuilds
* Add info-level logs to time note commitment tree rebuilds
* Log the number of rebuilt blocks after a fork, and the time per block
* Move humantime formats to zebra-chain
* Use human-friendly time formatting
* Update Zebra to 1.0.0-beta.12
* Simplify tower-* versioning by updating both to 0.2.27
* Simplify version search and replace by removing an old version from the docs
* Update Cargo.lock
* Add draft changelog as of PR #4693
* Update CHANGELOG to PR #4680
* Always activate tokio/tracing feature
And always build tests with all tokio features.
* Refactor tracing-subscriber init to simplify it
* Add the tokio-console feature and dependencies
* Add optional tokio-console support, and log the installed tracing layers at info level
Uses a tracing Registry for tokio-console, and a fmt::Subscriber otherwise.
* Add some TODOs based on tracing-subscriber features
* Fix up some spans
* Add a TODO for fixing a log filter bug in tokio-console mode
* Fix the syntax of links in comments
* Fix a mistake in the docs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unnecessary angle brackets from a link
* Revert the changes for links that serve as references
* Revert "Revert the changes for links that serve as references"
This reverts commit 8b091aa9fa.
* Remove `<` `>` from links that serve as references
This reverts commit 046ef25620.
* Don't use `<` `>` in normal comments
* Don't use `<` `>` for normal comments
* Revert changes for comments starting with `//`
* Fix some warnings produced by `cargo doc`
* Fix some rustdoc warnings
* Fix some warnings
* Refactor some changes
* Fix some rustdoc warnings
* Fix some rustdoc warnings
* Resolve various TODOs
Co-authored-by: teor <teor@riseup.net>
* Fix some unresolved links
* Allow links to private items
* Fix some unresolved links
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix significant drop in match scrutinee
https://github.com/rust-lang/rust/issues/93883
* Fix deref immutable value
* Fix explicit 0 index when first() would do
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix the syntax of links in comments
* Fix a mistake in the docs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unnecessary angle brackets from a link
* Revert the changes for links that serve as references
* Revert "Revert the changes for links that serve as references"
This reverts commit 8b091aa9fa.
* Remove `<` `>` from links that serve as references
This reverts commit 046ef25620.
* Don't use `<` `>` in normal comments
* Don't use `<` `>` for normal comments
* Revert changes for comments starting with `//`
* Fix some warnings produced by `cargo doc`
* Fix some rustdoc warnings
* Fix some warnings
* Refactor some changes
* Fix some rustdoc warnings
* Fix some rustdoc warnings
* Resolve various TODOs
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Bump crate versions
* Increment the protocol user agent
* Increment the version in `README.md`
* Increment the version in `install.md`
* Update `README.md`
* Update the changelog
* Increment the versions of crates that depend on other crates
* Update `Cargo.lock`
* Fix the syntax of links in comments
* Fix a mistake in the docs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unnecessary angle brackets from a link
* Revert the changes for links that serve as references
* Revert "Revert the changes for links that serve as references"
This reverts commit 8b091aa9fa.
* Remove `<` `>` from links that serve as references
This reverts commit 046ef25620.
* Don't use `<` `>` in normal comments
* Don't use `<` `>` for normal comments
* Revert changes for comments starting with `//`
* Fix some warnings produced by `cargo doc`
* Fix some rustdoc warnings
* Fix some warnings
* Refactor some changes
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Upgrade tracing and related dependencies
```sh
cargo upgrade --workspace
tracing-error
tracing-subscrber
color-eyre
tracing-flame
tracing-journald
sentry
sentry-tracing
metrics
metrics-exporter-prometheus
reqwest
```
* Update duplicate dependency checks
* Enable the tracing/env-filter feature
* Fix type inference for metrics
Manual changes, plus:
```sh
fastmod "as _" "as f64"
```
* Tidy up some unrelated test code
* Update metrics-exporter-prometheus API
And make unused dependencies optional.
* Adjust test regexes to new tracing format
Also fix some regex bugs, and refactor to simplify.
* Disable color-eyre span traces and track caller in release builds
* Add a feature that enables extra debugging in release builds
* Clean up some redundant features
* Increase a test timeout
* Fix the syntax of links in comments
* Fix a mistake in the docs
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Remove unnecessary angle brackets from a link
* Revert the changes for links that serve as references
* Revert "Revert the changes for links that serve as references"
This reverts commit 8b091aa9fa.
* Remove `<` `>` from links that serve as references
This reverts commit 046ef25620.
* Don't use `<` `>` in normal comments
* Don't use `<` `>` for normal comments
* Revert changes for comments starting with `//`
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* clippy: unused import on non-linux platforms
* Fix some instances of clippy::derive_partial_eq_without_eq
* Move a deref to fix clippy::significant_drop_in_scrutinee
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* bump versions
* add the changelog for beta 10
* Update CHANGELOG.md
Co-authored-by: Marek <mail@marek.onl>
* Distinguish CI and Rust dependency updates
* Include all the dep bumps in PR #4405
* join 2 dependencies
* Include incrementalmerkletree dep bump in changelog
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: Marek <mail@marek.onl>
* change: set NU5 mainnet activation height and minimum protocol version
* fix tests
* test if V5 coinbase expiry height is not bound by non-coinbase limit
* update get_blockchain_info snapshot for NU5
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* upgrade dependencies to NU5 mainnet versions
* migrate to bitvec 1.0
* update deny.toml
* point to published redjubjub 0.5
* Point at zcash-script@0.1.6 on crates.io
* update Cargo.lock
* specify patch versions of dependencies
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Impl the elementary structure of the `z_gettreestate` RPC
* Fix merging bugs
* Fix a merge bug
* Fix a merge bug
* Move a derive attribute
Co-authored-by: teor <teor@riseup.net>
* Clarify the support of negative heights
* Add Orchard note commitment trees to the response
* Add the time to the response
* Finalize the `z_gettreestate` RPC
* Add a note that verified blocks have coinbase height
* Refactor `from_str` for `HashOrHeight`
* Fix a mistake in the docs
Co-authored-by: teor <teor@riseup.net>
* Clarify request types
Co-authored-by: teor <teor@riseup.net>
* Simplify `hash_or_height` conversion to height
Co-authored-by: teor <teor@riseup.net>
* Add a TODO about optimization
Co-authored-by: teor <teor@riseup.net>
* Add a doc comment
* Make sure Sapling & Orchard trees don't get mixed up
* Serialize Sapling commitment trees
* Refactor some comments
* Serialize Orchard commitment trees
* Serialize block heights
* Simplify the serialization of commitment trees
* Remove the block time from the RPC response
* Simplify the serialization of block heights
* Put Sapling & Orchard requests together
* Remove a redundant TODO
* Add block times to the RPC response
* Derive `Clone, Debug, Eq, PartialEq` for `GetTreestate`
Co-authored-by: teor <teor@riseup.net>
* Derive `Clone`, `Debug`, `Eq` and `PartialEq` for `SerializedTree`
* Document the fields of `GetTreestate`
* Skip the serialization of empty trees
This ensures compatibility with `zcashd` in the `z_gettreestate` RPC.
* Document the `impl` of `merkle_tree::Hashable` for nodes
* Make the structure of the JSON response consistent with `zcashd`
* Derive `Eq` for nodes
Co-authored-by: teor <teor@riseup.net>
* Convert Sapling commitment trees to a format compatible with zcashd
* Refactor the conversion of Sapling commitment trees
* Refactor some comments
* Refactor comments
* Add a description of the conversion
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Fix comment indenting
* Document the conversion between the dense and sparse formats
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Move `init_tracing` to `lib.rs`
Allow it to be reused by other binaries.
* Fix `hex` dependency inclusion in `zebra-chain`
It would previously fail because `hex` was being included without the
`serde` feature, even though we required that for `transparent::Script`.
* Implement `FromStr` for `Network`
Make it easy to receive it as a command-line parameter.
* Add `zebra-tip-height` utility
Obtains the chain tip height of a directory containing Zebra state.
* Remove Tokio dependency from `zebra-utils`
It wasn't actually used by the `zebra-tip-height` utility.
* Remove `BoxStateService` type alias
It's not needed if we don't return the unused state service. This also
allows removing the `tower` dependency.
* Remove unnecessary attribute
Leftover from copied code.
* Make `cache_dir` argument optional
Fallback to the default Zebra state cache directory.
* Remove added newline
Minor formatting fix, to avoid adding an unnecessary newline.
* Move `tip-height` command into `zebrad`
Make it available as a sub-command in `zebrad`.
* Make some zebrad sub-commands only log warnings
Co-authored-by: teor <teor@riseup.net>
* implement display for `Script`
* implement `getaddressutxos`
* fix space
* normalize list of addresses as argument to rpc methods
* implement `AddressStrings`
* make a doc clearer
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This is the `zcashd` network protocol version:
- after the first NU5 testnet activation, and
- after updating to the second NU5 testnet activation consensus rules,
- but before setting the second NU5 testnet activation height.
* Update changelog for 1.0.0-beta.8
* Bump Zebra crate versions
The tower crates and their dependencies haven't changed,
so their versions don't need to be bumped.
Some Zebra crates haven't changed,
but I bumped all the versions to keep them consistent.
* Explicitly say that we support NU5 testnet 2
* Expand PR #3799 into changelog entries
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* update librustzcash; adapt to new API
* add ticket reference for removing zcash_proofs duplicated dependencies
* update to new zcash_script V5 API
* use zp_tx shorthand
* update to Zcash 4.7.0 dependencies
* update protocol versions
* feat(rpc): Implement `getblockchaininfo` RPC method (#3891)
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Make sync error logs more user-friendly (#3944)
- use info level, there is nothing the user needs to do,
particularly for a single error
- explain that the errors are temporary
- hide backtraces, because they look like crashes
* Update test.patch.yml with lightwalletd job (#3970)
* Update test.patch.yml with lightwalletd job
* Remove a workflow condition that will always be false
In general, patch workflows need the
opposite conditions to the original workflow.
But in this case, we know the result of the
condition will always be true, so we can just delete it.
Co-authored-by: teor <teor@riseup.net>
* fix(doc): Fix bugs in the lightwalletd database design (#3964)
* Re-order column families in design in dependency order
* Minor RFC design tweaks and fixes
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Repoint zebra image links to our new zfnd.org site for now (#3949)
* Repoint zebra image links to our new zfnd.org site for now
* Remove images/
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Fix typos (#3956)
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* bump database version to trigger testnet rollback
* reduce minimum protocol version for now (will be changed later)
* update dependencies
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* update versions to match zcash 4.7.0
* deny.toml: update 'darling'
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
Co-authored-by: Dimitris Apostolou <dimitris.apostolou@icloud.com>
* Make address index types consistent
* Simplify non-finalized address index updates
* Update snapshots for address index queries
* Simplify non-finalized UTXO query
* Add a query method for non-finalized address balance changes
* Add a query method for finalized state address balances
* Add a query function for address balances
* Refactor balance queries to make them repeatable
* Retry interrupted finalized balance queries
* Pop chain root blocks until it matches the finalized tip
* Avoid cloning the chain
It has already been cloned by the watch receiver
* Refactor and fix documentation of the balance query code
* Add test-only serialization, and make existing serialization test-only
* Make AddressLocations clearer in the API
* Add UnspentOutputAddressLocation
* Add the AddressLocation to the UTXO database value
* Update the snapshot test code for UnspentOutputAddressLocation
* Update the raw data snapshots
* Update the high-level data snapshots
* Increment the database version
* Make serialization clearer
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Fix code formatting
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add an empty utxo_by_transparent_addr_loc column family
* Update snapshot data for the new column family
* Add an AddressUnspentOutputs type
* Add round-trip tests for AddressUnspentOutputs
* Move address balances into their own method
* Simplify updating address balances
* Fix utxo_by_out_loc column family name
* Implement reads and writes of address UTXOs
* Update raw data snapshots
* Update the snapshot tests for high-level address UTXOs
* Assert rather than taking empty address snapshots for genesis
* Update high-level address UTXO snapshot data, and delete empty snapshots
* Increment the database version
* Use typed values for all ReadDisk methods
* Implement test-only serialization for transparent::Address
* Implement FromDisk for ()
* Store AddressUnspentOutput as the column family key
* Update round-trip serialization tests for AddressUnspentOutput
* Update snapshot test code, and add a UTXO data snapshot
* Update existing snapshot data
* Add new UTXO snapshot data
* Update column family name
```sh
fastmod utxo_by_transparent_addr_loc utxo_loc_by_transparent_addr_loc zebra*
```
* cargo fmt --all
* cargo insta test --review --delete-unreferenced-snapshots
* Explain why it is ok to use invalid database iterator indexes
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add explanations of UTXO database updates
* Simplify an assertion
* Remove UnspentOutputAddressLocation and just store transparent::Output
* Update snapshot test data
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Derive Hash for transparent address index types
* Expose some types used by transparent address indexes
* Add an empty transparent transfers type for transparent address indexes
* Update TransparentTransfers with created UTXOs
* Add spent transparent outputs to ContextuallyValidBlock
* Update TransparentTransfers with spent transparent outputs
* Ignore missing spent outputs, so that tests pass
* Remove empty TransparentTransfers after a spend revert
* Update TransparentTransfers with creating and spending transaction IDs
* Ignore duplicate created UTXOs, so that tests pass
* Add some TODO comments
* Remove accidental doctest formatting
* Add address transfers index accessor methods
* Use TransactionLocation in the non-finalized state
* Apply more address index assertions to production code
* Refactor deeply nested code and apply more assertions
* Return UTXOs in chain order
* Return transaction hashes in chain order
* Stop indexing each transparent output multiple times
* Run some more asserts during tests
* Tidy TODO comments
* Fix an incorrect assert condition
* Use OrderedUtxos so that spent UTXOs can be stored in chain order
* Update tests to use OrderedUtxos
* Update the index API for the getaddressutxos query
* Remove redundant arguments in tests
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add Utxo constructors from output locations
* Store transparent outputs rather than Utxo structs
* Update raw data snapshots
* Increment the state version
* Change OutputLocation to contain a TransactionLocation
* Change OutputLocation reads from the database
* Update some doc comments
* Update some TODOs
* Change deleting spent UTXOs and updating spent balances
* Change adding new UTXOs and adding their values to balances
* Disable dead code warnings
* Update snapshot test code
* Update round-trip tests for OutputLocations
* Update snapshot test data
* Increment the database format version
* Remove a redundant try_into()
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Refactor redundant code
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* ci: attempt at fixing 'Regenerate stateful disks'
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add an empty balance_by_transparent_addr column family
* Add an AddressBalanceLocation type for balance_by_transparent_addr
* Add serialization for balance_by_transparent_addr types
* Add round-trip tests for the new serialized types
* Add missing round-trip and serialized equality tests
* Add a network field to DiskWriteBatch
* Refactor confusing all_utxos_spent_by_block argument
It was actually just the UTXOs from the state spent by the block,
excluding the UTXOs created and spent within the block.
But now we need it to contain all the spent outputs,
including the ones created by the block.
* Read and update address balances in the finalized state
* Update raw data snapshots for transparent address balances
* Add test-only deserialization for transparent addresses
* Add high-level snapshot test code for address balances
* Add high-level snapshots for address balances
* Increment the state version after NU5 testnet 2 rollback
* Update changelog for v1.0.0-beta.7
* Increment all crate versions
* Remove redundant release test that is now covered by CI
* Remove completed NU5 README check task from the release template
* Add Merge Freeze tool to the release checklist
* Simplify release checklist by removing unused steps
* Repoint zebra image links to our new zfnd.org site for now
* Remove images/
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Implement `getblockchaininfo` RPC method
* add a test for `get_blockchain_info`
* fix tohex/fromhex
* move comment
* Update lightwalletd acceptance test for getblockchaininfo RPC (#3914)
* change(rpc): Return getblockchaininfo network upgrades in height order (#3915)
* Update lightwalletd acceptance test for getblockchaininfo RPC
* Update some doc comments for network upgrades
* List network upgrades in order in the getblockchaininfo RPC
Also:
- Use a constant for the "missing consensus branch ID" RPC value
- Simplify fetching consensus branch IDs
- Make RPC type derives consistent
- Update RPC type documentation
* Make RPC type derives consistent
* Fix a confusing test comment
* get hashand height at the same time
* fix estimated_height
* fix lint
* add extra check
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* split test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* fix(rpc): ignore an expected error in the RPC acceptance tests (#3961)
* Add ignored regexes to test command failure regex methods
* Ignore empty chain error in getblockchaininfo
We expect this error when zebrad starts up with an empty state.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add round-trip test for OutputLocation disk serialization
* Make the transaction snapshot tests more accurate
Previously, we were showing the genesis transaction hash at height 0, index 0.
But its hash is actually not stored by location in the database,
because the genesis transaction is skipped due to a consensus rule.
* Update the transaction snapshot data
* Add history tree snapshot tests
At the current test heights, the history trees are all empty.
* Add the history tree snapshot data
* Update comments
* Simplify snapshot test code
* Make some serde::Serialize impls test-only, so we can hex-encode them
This should also speed up release compilation a bit.
* Add snapshot test code for UTXOs
* Add snapshot data for UTXOs
* Test if mandatory checkpoint is after grace period
Check that the mandatory checkpoint height is after the ZIP-212 grace
period for both mainnet and testnet, because Zebra is currently unable
to fully validate the blocks during that grace period.
* Update mandatory checkpoint height
Require it to be after the ZIP-212 grace period so that the blocks
during the grace period are validated by the checkpoints because Zebra
can't currently fully validate blocks during that period.
* feature(rpc): start adding a `getblock` method
* fix(rpc): replace oneshot
* fix(rpc): replace a panic with error
* fix(rpc): fix test
* feature(rpc): add hex to response
* refactor(rpc): use generic instead of alias
* docs(rpc): improve docs for getblock method
* test(rpc): add a test for getblock method
* deps(rpc): remove non needed tower features
Co-authored-by: teor <teor@riseup.net>
* docs(rpc): add a note to getblock doc
* refactor(rpc): replace alias
* fix(rpc): use `zcash_serialize_to_vec()` instead of logging format
* tests(rpc): add network argument to `populated_state()`
* refactor(rpc): use an error for state service readiness
* fix(rpc): add parameter
* fix(rpc): clippy
* nit(rpc): remove new line from imports
* fix(rpc): remove commented code
* fix(rpc): simplify error
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Use a `SerializedBlock` type to help serializing blocks (#3725)
* Create a `SerializedBlock` helper type
Create a type that can be used as a byte slice, but is guaranteed to
represent a valid block.
* Use `into_iter` instead of `iter`
There's no need to borrow the elements, they can be moved out directly.
This will be necessary because `&Arc<T>` doesn't implement `Borrow<T>`,
so a `SerializedBlock` can't be built directly from an `&Arc<Block>`.
* Use `SerializedBlock` in `GetBlock`
Make the type stricter to avoid storing possibly invalid values. The
bytes are still serialized as a hexadecimal string, through the usage of
`hex`.
The `serde::Deserialize` can't be derived because `hex` requires the
type to also implement `FromHex`.
* feature(rpc): add suggestions from code review
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* tests(rpc): make sure mempool has no requests in get_block test
* fix(rpc): change height argument type in getblock method
* fix(rpc): rustfmt
* fix(rpc): replace panic
* fix(rpc): change getblock response
* fix(rpc): fix lightwalletd test
* tests(rpc): add a getblock error test
* fix(rpc): try another regex
* feature(rpc): add `getbestblockhash` RPC method
* feature(rpc): Add a `pub struct SerializedBlockHash` type
* tests(rpc): add a unit test for `getbestblockhash` method
* tests(rpc): make sure no requests are sent to mempool in getbestblockhash test
* tests(rpc): refactor check
Co-authored-by: teor <teor@riseup.net>
* fix(rpc): fixes after rebase
* refactor(rpc): refactor `GetBestBlockHash`
* fix(rpc): unused variables
Co-authored-by: teor <teor@riseup.net>
* docs(rpc): update
* fix(rpc): add panic
* fix(rpc): fix panic
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* feature(rpc): start adding a `getblock` method
* fix(rpc): replace oneshot
* fix(rpc): replace a panic with error
* fix(rpc): fix test
* feature(rpc): add hex to response
* refactor(rpc): use generic instead of alias
* docs(rpc): improve docs for getblock method
* test(rpc): add a test for getblock method
* deps(rpc): remove non needed tower features
Co-authored-by: teor <teor@riseup.net>
* docs(rpc): add a note to getblock doc
* refactor(rpc): replace alias
* fix(rpc): use `zcash_serialize_to_vec()` instead of logging format
* tests(rpc): add network argument to `populated_state()`
* refactor(rpc): use an error for state service readiness
* fix(rpc): add parameter
* fix(rpc): clippy
* nit(rpc): remove new line from imports
* fix(rpc): remove commented code
* fix(rpc): simplify error
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Use a `SerializedBlock` type to help serializing blocks (#3725)
* Create a `SerializedBlock` helper type
Create a type that can be used as a byte slice, but is guaranteed to
represent a valid block.
* Use `into_iter` instead of `iter`
There's no need to borrow the elements, they can be moved out directly.
This will be necessary because `&Arc<T>` doesn't implement `Borrow<T>`,
so a `SerializedBlock` can't be built directly from an `&Arc<Block>`.
* Use `SerializedBlock` in `GetBlock`
Make the type stricter to avoid storing possibly invalid values. The
bytes are still serialized as a hexadecimal string, through the usage of
`hex`.
The `serde::Deserialize` can't be derived because `hex` requires the
type to also implement `FromHex`.
* feature(rpc): add suggestions from code review
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* tests(rpc): make sure mempool has no requests in get_block test
* fix(rpc): change height argument type in getblock method
* fix(rpc): rustfmt
* fix(rpc): replace panic
* fix(rpc): change getblock response
* fix(rpc): fix lightwalletd test
* tests(rpc): add a getblock error test
* fix(rpc): try another regex
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* refactor(test/block): rename large single transaction function
```sh
fastmod single_transaction_block single_transaction_block_many_inputs
```
* rustfmt
* test(block): add a test block with many transparent outputs
* doc(db): explain why we can't just get the UTXOs right before they are deleted
* refactor(db): split out a block data write method
* refactor(block): add a height argument to new_outputs
* test(db): add block and transaction round-trip tests
Including large blocks and transactions.
* test(db): fix large block serialization instability in the tests
* doc(block): add TODOs for generating correct blocks
* Make transparent output functions which take a height test-only
* make sure generated blocks are actually over/under-sized
* replace println!() with an error!() log
* Stub `sendrawtransaction` RPC method
Register the RPC method, and stub an implementation that currently just
panics. The method has a single `String` parameter with the hexadecimal
string of the raw transaction's bytes and returns a
`SentTransactionHash` wrapper type that's just a hexadecimal `String` of
the sent transaction's hash.
* Add mempool service instance to `RpcImpl`
Use a type parameter to represent the mempool service using the
interface defined by `zebra-node-services`.
* Update test vector to use a mock mempool service
Update the test to be compatible with the changes to `RpcImpl`. The mock
mempool service is expected to not be used during the test.
* Use a `tower::Buffer` for the mempool service
Make it simpler to send requests to the service in a concurrent manner.
* Return a `Future` from `send_raw_transaction`
Make the call asynchronous.
* Implement `sendrawtransaction` RPC
Deserialize the transaction and send it to be queued for verification
and subsequent inclusion in the mempool.
* Test if mempool receives sent raw transaction
Use a mock service as the mempool service and check that it receives a
sent raw transaction.
* Test using non-hexadecimal string parameter
The method should return an error.
* Test with bytes that fail deserialization
Check that the method returns an invalid parameters error if the input
can't be deserialized as a `Transaction`.
* Test if mempool errors are forwarded to caller
Mempool service errors should be sent back to the remote caller as
server errors.
* Test transactions rejected by the mempool service
Transactions that are rejected by the mempool service should result in
a server error being sent to the caller.
* Improve error message
Add the word "structurally" to make it clear that the issue is in the
transaction's deserialization.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* Add note regarding missing `allowhighfees` param.
The parameter isn't supported yet because `lightwalletd` doesn't use it.
* Update the documentation to be consistent
Follow the convention adopted by the `get_info` RPC method.
* Implement `ToHex` and `FromHex` for `Hash`
Make it easier to generate hexadecimal strings from `transaction::Hash`
instances.
* Use `ToHex` in `Debug` and `Display`
Reduce repeated code.
* Refactor to add `bytes_in_display_order` method
Use it to remove repeated code and improve clarity a bit.
* Use `hex::serialize` to serialize transaction hash
Make the type stricter in its contents, while still serializing the
transaction has as a hexadecimal string.
* Simplify serialization attribute
Deserialization should also use `hex::deserialize`, so using the shorter
attribute makes things easier to read and more future proof.
* Update zebra-chain/src/transaction/hash.rs
* Remove unnecessary lifetime
The anonymous lifetime is automatically inferred by the compiler.
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* fix(zebrad/test): stop excessive logging which causes test hangs
If we print a line every time the network upgrade heights are accessed,
some tests hang. This could happen because they are expecting different
log output, or because the standard output pipes fill up, blocking the
`zebrad` subprocess.
* doc(test/nu): explain cargo feature unification and test env vars
* Upgrade some dependencies
* Upgrade some dependencies
* Upgrade dependencies for zebrad
* Upgrade tracing dependencies
* Revert `tor` & `arti`
* Upgrade `criterion` & `pin-project` in `deny.toml`
* Remove some dependencies from `skip-tree` in `deny.toml`
* Revert some the versions of dependencies because of duplicates
* Revert proptest regressions
* Upgrade dependencies, then ignore some more duplicates (#3716)
* feat(actions)!: add full sync test (#3582)
* add(tests): full sync test
* fix(test): add build
* fix(deploy): escape double dashes '--' correctly
* fix(test): remove unexpected --no-capture arg
error: Found argument '--nocapture' which wasn't expected, or isn't valid in this context
* refactor(docker): use default executable as entrypoint
* refactor(startup): add a custom entrypoint
* fix(test): add missing TEST_FULL_SYNC variable
* test(timeout): use the biggest machine
* fix
* fix(deploy): use latest successful image
* typo
* refactor(docker): generate config file at startup
* revert(build): changes were made to docker
* fix(docker): send variables correctly to the entrypoint
* test different conf file approach
* fix(env): add RUN_TEST env variable
* ref: use previous approach
* fix(color): use environment variable
* fix(resources): use our normal machine size
* fix(ci): double CPU and RAM for full sync test
* fix(test): check for zebrad test output in the correct order
The mempool is only activated once, so we must check for that log first.
After mempool activation, the stop regex is logged at least once.
(It might be logged before as well, but we can't rely on that.)
When checking that the mempool didn't activate,
wait for the `zebrad` command to exit,
then check the entire log.
* fix(ci): run full sync test with full compiler optimisations
* fix(tests): reintroduce tests and run full sync on approval
* fix(tests): reduce the changelog
Co-authored-by: teor <teor@riseup.net>
* fix(ci): update CI job path triggers (#3692)
* ci(test): re-run tests when snapshot data changes
* fix(ci): rebuild state when disk format changes
* fix(ci): rebuild rust docs when code or dependencies change
* doc(ci): explain why we run jobs when files change
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* fix(build): use the right multistage target (#3700)
* fix(review): only assign one reviewer to general Rust reviews (#3708)
If we assign two teams, GitHub assigns two reviewers.
* fix(ci): change the color-eyre ignore to a tracing-subscriber ignore
* fix(ci): ignore duplicate darling dependencies
* doc(ci): remove an alternative resolution doc
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* fix: check TEST_FAKE_ACTIVATION_HEIGHTS at runtime
* fix(tests): add TEST_FAKE_ACTIVATION_HEIGHTS variable
This variable ensures the test is activated in the `test-fake-activation-heights` step
* fix(docker): do not run specific tests by default in entrypoint.sh
* fix(test): remove extra TEST_FULL_SYNC argument
* imp(timeout): wait for an average build time
Co-authored-by: Gustavo Valverde <gustavo@iterativo.do>
* docs: document consensus rules from 4.6 Action Descriptions
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
* Apply suggestions from code review
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Marek <mail@marek.onl>
* change `anchorSapling` type
* implement PartialEq manually for clippy
* use `unique_by` in place of `sorted`
* replace panic with new error
* improve some serialize/deserialize calls for sapling anchors
* fix arbitrary for sapling::tree::Root
* remove dedup()
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix(network): split synthetic NotFoundRegistry from message NotFoundResponse
* docs(network): Improve `notfound` message documentation
* refactor(network): Rename MustUseOneshotSender to MustUseClientResponseSender
```
fastmod MustUseOneshotSender MustUseClientResponseSender zebra*
```
* docs(network): fix a comment typo
* refactor(network): remove generics from MustUseClientResponseSender
* refactor(network): add an inventory collector to Client, but don't use it yet
* feat(network): register missing peer responses as missing inventory
We register this missing inventory based on peer responses,
or connection errors or timeouts.
Inbound message inventory tracking requires peers to send `notfound` messages.
But `zcashd` skips `notfound` for blocks, so we can't rely on peer messages.
This missing inventory tracking works regardless of peer `notfound` messages.
* refactor(network): rename ResponseStatus to InventoryResponse
```sh
fastmod ResponseStatus InventoryResponse zebra*
```
* refactor(network): rename InventoryStatus::inner() to to_inner()
* fix(network): remove a redundant runtime.enter() in a test
* doc(network): the exact time used to filter outbound peers doesn't matter
* fix(network): handle block requests slightly more efficiently
* doc(network): fix a typo
* fmt(network): `cargo fmt` after rename ResponseStatus to InventoryResponse
* doc(test): clarify some test comments
* test(network): test synthetic notfound from connection errors and peer inventory routing
* test(network): improve inbound test diagnostics
* feat(network): add a proptest-impl feature to zebra-network
* feat(network): add a test-only connect_isolated_with_inbound function
* test(network): allow a response on the isolated peer test connection
* test(network): fix failures in test synthetic notfound
* test(network): Simplify SharedPeerError test assertions
* test(network): test synthetic notfound from partially successful requests
* test(network): MissingInventoryCollector ignores local NotFoundRegistry errors
* fix(network): decrease the inventory rotation interval
This stops us waiting 3-4 sync resets (4 minutes) before we retry a missing block.
Now we wait 1-2 sync resets (2 minutes), which is still a reasonable rate limit.
This should speed up syncing near the tip, and on testnet.
* fmt(network): cargo fmt --all
* cleanup(network): remove unnecessary allow(dead_code)
* cleanup(network): stop importing the whole sync module into tests
* doc(network): clarify syncer inventory retry constraint
* doc(network): add a TODO for a fix to ensure API behaviour remains consistent
* doc(network): fix a function doc typo
* doc(network): clarify how we handle peers that don't send `notfound`
* docs(network): clarify a test comment
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Remove redundant documentation
The documentation was exactly the same as the documentation from the
trait.
* Calculate a mock time block delta for tests
Simulate a block being added to the chain with a random block time based
on the previous block time and the target spacing time.
* Add a `time` field to `ChainTipBlock`
Store the block time so that it's ready for a future chain that allows
obtaining the chain tip's block time.
* Add `ChainTip::best_tip_block_time` method
Allow obtaining the bes chain tip's block time.
* Add method to obtain both height and block time
Prevent any data races by returning both values so that they refer to
the same chain tip.
* Add `NetworkUpgrade::all_target_spacings` method
Returns all the target spacings defined for a network.
* Create a `NetworkChainTipEstimator` helper type
Isolate the code to calculate the height estimation in a new type, so
that it's easier to understand and doesn't decrease the readability of
the `chain_tip.rs` file.
* Add `ChainTip::estimate_network_chain_tip_height`
This is more of an extension method than a trait method. It uses the
`NetworkChainTipHeightEstimator` to actually perform the estimation, but
obtains the initial information from the current best chain tip.
* Fix typo in documentation
There was an extra closing bracket in the summary line.
* Refactor `MockChainTipSender` into a separate type
Prepare to allow mocking the block time of the best tip as well as the
block height.
* Allow sending mock best tip block times
Add a separate `watch` channel to send the best tip block times from a
`MockChainTipSender` to a `MockChainTip`.
The `best_tip_height_and_block_time` implementation will only return a
value if there's a height and a block time value for the best tip.
* Fix off-by-one height estimation error
Use Euclidean division to force the division result to round down
instead of rounding towards zero. This fixes an off-by-one error when
estimating a height that is lower than the current height, because the
fractionary result was being discarded, and it should have forced the
height to go one block back.
* Fix panics on local times very far in the past
Detect situations that might cause the block height estimate to
underflow, and return the genesis height instead.
* Fix another off-by-one height estimation error
The implementation of `chrono::Duration::num_seconds` adds one to the
number of seconds if it's negative. This breaks the division
calculation, so it has to be compensated for.
* Test network chain tip height estimation
Generate pairs of block heights and check that it's possible to estimate
the larger height from the smaller height and a displaced time
difference.
* Support large block heights
* Document consensus rules referring to expiry heights
* Refactor the docs
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Fix the formatting of an error message
* refactor: Simplify coinbase expiry code so the consensus rule is clear (#3408)
* Fix some outdated TODO comments
* refactor(coinbase expiry): Simplify the code so consensus rule is clear
* Fix the formatting of an error message
* Remove a redundant comment
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Marek <mail@marek.onl>
* Check the max expiry height at parse time
* Test that 2^31 - 1 is the last valid height
* Add tests for nExpiryHeight
* Add tests for expiry heights of V4 transactions
* Add tests for V5 transactions
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* document the `header` field
* document the `nVersionGroupId` field
* document the `nConsensusBranchId` field
* document the `lock_time` field
* document the `nExpiryHeight` field (and some missing `lock_time`)
* add missing note to `header` field in serialization
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat(network): create an API for registering missing inventory, but don't use it yet
* feat(constraint): implement AtLeastOne::iter_mut()
* refactor(network): add InventoryStatus::marker() method to remove associated data
* fix(network): prefer current inventory, and missing inventory statuses
* fix(network): if an inventory rotation is missed, delay future rotations
* fix(network): don't immediately rotate a new empty inventory registry
* fix(network): assert that only expected inventory variants are stored in the registry
* test(network): add a basic empty inventory registry test
Also adds an inventory registry update future,
which makes it easier to call from an async context.
* refactor(network): add a convenience API for new InventoryChanges
* feat(network): improve inventory registry logging and metrics
* test(network): make sure advertised and missing inventory is correctly registered
* test(network): check that missing inventory is preferred over advertised
* test(network): check that current inventory is preferred over previous
* test(network): check peer set routes inv requests to advertised peers
* refactor(network): make the InventoryChange API more flexible
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Add all_previous_outputs; load UTXOs in transaction verifier
* Remove UTXO loading and returning from script.rs
* Don't pass state service to script verifier
* Remove output from is_valid()
* Refactor loading UTXOs to separate function
* Pass all_previous_output to sighash
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Create AwaitUtxo only when needed; formatting
* Add comments about output vectors in tests
* Change sighash() to receive reference and avoid cloning
* Expand comments
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* lint: enable more clippy checks for bug-prone code
* fix(lint): stop denying lints, to avoid being excluded from Crater
Also categorise lints.
* lint: add some lints to the TODO list
* refactor(arithmetic): partial fixes for some integer arithmetic lints
* Document some weird lint behaviour
* Updating zebra-test to v1.0.0-beta.4
* Updating tower-fallback to v0.2.16
* Updating tower-batch to v0.2.20
* Updating zebra-chain to v1.0.0-beta.4
* Updating zebra-script to v1.0.0-beta.4
* Updating zebra-network to v1.0.0-beta.4
* Updating zebra-state to v1.0.0-beta.4
* Updating zebra-consensus to v1.0.0-beta.4
* Updating zebra-utils to v1.0.0-beta.4
* Updating zebrad to v1.0.0-beta.4
* Update Cargo.lock with updated crate versions
* Add section for 1.0.0-beta.4 in the CHANGELOG
* Update CHANGELOG.md
Co-authored-by: teor <teor@riseup.net>
* Update README.md
Co-authored-by: teor <teor@riseup.net>
* Update book/src/user/install.md
Co-authored-by: teor <teor@riseup.net>
* Update release description to mention Rust 2021
Update the changelog to mention that all crates now use Rust 2021
Edition.
* Elaborate on Section 3.6 documentation entry
Add the title of the section and mention that it's a section of the
Zcash protocol specification.
* Make changelog entries consistent
Use the same format for entries related to consensus rule documentation.
Co-authored-by: Marek <mail@marek.onl>
* Update README about validated consensus rules
Zebra now validates all documented consensus rules.
* Add changelog entry for newly merged PR
Describe the security fix in the changelog.
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Marek <mail@marek.onl>
The 2021 edition activates the v2 cargo resolver.
This broke implicit feature resolution,
but only when `zebra-chain`'s dev or bench targets were compiled by themselves.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Move standard lints into .cargo/config.toml
* Ignore "wrong self convention" in a futures-based trait
This lint might only trigger on beta or nightly at the moment.
* Warn if future incompatibile code is added to Zebra
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* Refactor so that RetryLimit::Future is std::marker::Sync
* Make the syncer future std::marker::Send by spawning tips futures
* Download synced blocks in chain order, not HashSet order
* Improve MockService failure messages
* Add closure-based responses to the MockService API
* Move MockChainTip to zebra-chain
* Add a MockChainTipSender type alias
* Support MockChainTip in ChainSync and its downloader
* Add syncer tests for obtain tips, extend tips, and wrong block hashes
* Add block too high tests for obtain tips and extend tips
* Add syncer tests for duplicate FindBlocks response hashes
* Allow longer request delays for mocked services in syncer tests
* Ensure that sapling::keys::TransmissionKey jubjub point is always in the prime order group
* Adjust TransmissionKey check; add AuthorizingKey check
* Move ValueCommitment small order check to deserialization
* Apply suggestions from code review
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Use is_torsion_free() instead of is_identity() and is_prime_order()
* Add EphemeralPublicKey small order check on instantiation; remove old checks
* Use VerificationKey instead of VerificationKeyBytes; fix tests
* Use ValidatingKey instead of VerificationKeyBytes for rk
* Reject identity when creating an Orchard EphemeralPublicKey
* Make documentation more consistent, use generator in tests
* s/JubJub/Jubjub/
* Fix zebra-consensus tests (insert_fake_orchard_shielded_data)
* Create NotSmallOrderValueCommitment, since intermediate values can be the identity
* Clarify documentation
* rustdoc
* Tidy rustdoc
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Pili Guerra <mpguerra@users.noreply.github.com>
* Create a strategy for block heights after Sapling
Provides an arbitrary network (mainnet or testnet) and a block height
between the Sapling activation height on that network and the maximum
block height.
* Create a helper function to select block heights
Allows generating block heights inside a range using a scale factor
between 0 and 1.
* Allow specifying the outpoint index for mock UTXOs
Avoid creating multiple transparent transfers in the same transaction
with the same source UTXO, which would lead to a double spend.
* Create helper function to mock multiple transfers
Given relative block height scale factors, create a mock transparent
transfer for each one of them.
Also add a constant that serves as a guideline for the maximum number of
transparent transfers to mock.
* Create helper function to sanitize tx. version
Make sure the arbitrary transaction version is valid for the network
(testnet or mainnet) at the specified block height.
* Create `mock_transparent_transaction` helper func.
Creates a V4 or V5 mock transaction that only includes transparent
inputs and outputs.
* Create helper function for transaction validation
Performs the actual tested action of verifying a transaction. It sets up
the verifier and uses it to obtain the verification result.
* Test if zero lock time means unlocked
Generate arbitrary transactions with zero lock time, and check that they
are accepted by the transaction verifier.
* Allow changing the sequence number of an input
Add a setter method for a `transparent::Input`'s sequence number. This
setter is only available for testing.
* Test if sequence numbers can disable lock time
Create arbitrary transactions and set the sequence numbers of all of its
inputs to `u32::MAX` to see if that disables the lock time and the
transactions are accepted by the verifier.
* Test block height lock times
Make sure that the transaction verifier rejects transactions that are
still locked at a certain block height.
* Test block time lock times
Test that the transaction verifier rejects a transaction that is
validated at a block time that's before the transaction's lock time.
* Test unlocking by block height
Test that transactions unlocked at an earlier block height are accepted
by the transaction verifier.
* Test transactions unlocked by the block time
Test that transactions that were unlocked at a previous block time are
accepted by the transaction verifier.
* Fix an incorrect method comment
Co-authored-by: teor <teor@riseup.net>
* Tweak crawler timings so peers are more likely to be available
* Tweak min peer connection interval so we try all peers
* Let other tasks run between fanouts, so we're more likely to choose different peers
* Let other tasks run between retries, so we're more likely to choose different peers
* Let other tasks run after peer crawler DemandDrop
This makes it more likely that peers will become ready.
* Integrate JoinSplit verifier with transaction verifier
* Add test with malformed Groth16 Output proof
* Use TryFrom instead of From in ItemWrapper to correctly propagate malformed proof errors
* Simplify by removing ItemWrapper and directly TryFrom into Item
* Fix existing tests to work with JoinSplit validation
* Apply suggestions from code review
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Pili Guerra <mpguerra@users.noreply.github.com>
* Do prelim checking of Sprout anchors in non-finalized state
Does not check intra-transaction interstitial states yet
* Populate sprout anchors to allow other state tests to pass
* Preliminary interstitial sprout note commitment tree anchor checks implementation
* Make sure only prior anchors are checked in the same transaction
* Add tests
* Refactor a comment
* Refactor rustdoc
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Use the first `JoinSplit`s from mainnet
* Print debug messages
* Use correct blocks for the tests
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* fix parse_coinbase_height()
* move tests and create test for parse_coinbase_height()
* add a coinbase height round trip prop test
* fix range
Co-authored-by: teor <teor@riseup.net>
* extend examples in test
* add more round trip testing
* extend the range of test
Co-authored-by: teor <teor@riseup.net>
* add test for single byte
Co-authored-by: teor <teor@riseup.net>
* Stop checking the entire AddressBook for each connection attempt
* Stop redundant peer time checks within the address book
* Stop calling `Instant::now` 3 times for each address book update
* Only get the time once each time an address book method is called
* Update outdated comment
* Use an OrderedMap to efficiently store address book peers
* Add address book order tests
Zebra's latest beta continues implementing zero-knowledge proof and note commitment tree validation. In this release, we have finished implementing transaction header, transaction amount, and Zebra-specific NU5 validation. (NU5 mainnet validation is waiting on an `orchard` crate update, and some consensus parameter updates.)
We also fix a number of security issues that could pose a local denial of service risk, or make it easier for an attacker to make a node follow a false chain.
As of this release, Zebra will automatically download and cache the Sprout and Sapling Groth16 circuit parameters. The cache uses around 1 GB of disk space. These cached parameters are shared across all Zebra and `zcashd` instances run by the same user.
See CHANGELOG.md for the full list of changes in this release.
* Add Transaction::sprout_joinsplits()
* Add Anchor variants to ValidateContextError
* Make Chain anchor collections pub(crate)
* tracing::instrument several methods in state
* Add contains_*_anchors methods to FinalizedState
* Add check::anchors module and function
* Verify that anchors_refer_to_earlier_treestates in when updating chains in non-finalized state
* Update zebra-state/src/service/check/anchors.rs
Co-authored-by: teor <teor@riseup.net>
* Add anchors() to sapling::ShieldedData
* Add sapling_anchors() to Transaction
* Use Transaction::sapling_anchors() in the anchors_refer_to_earlier_treestates() check
* Whoops, itertools
* Add a comment for improvement
Co-authored-by: teor <teor@riseup.net>
* Add & use a cfg(test) method on FinalizedState to prep test state with anchors to allow other tests to pass contextual checks
* Allow test nullifier checks to pass by populating anchor sets, allowing test anchor checks to pass
* Add mainnet block 419202 and its sapling note commitment tree root to test vectors
* Test sapling anchor verification using the first few Sapling blocks data
* Correct comment
* assert_eq instead of assert(bool)
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Update zebra-state/src/service/non_finalized_state.rs
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Marek <mail@marek.onl>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Download and load Sprout parameters using zcash_proofs
Also update some librustzcash dependencies, to avoid duplicate dependencies.
* Update upstream orchard to avoid a compilation error
* Skip librustzcash batch refactor for now, to avoid compilation errors
* Change the cache ID, so we actually cache Sprout
* Move existing file checks into zcash_proofs
* Add a 1 hour timeout to parameter file downloads
* Give other tasks priority, before spawning the download task
* Update to the latest version of our modified librustzcash fork
* Change the cache key for Sprout
* Add 40 minutes to CI timeouts for occasional sprout downloads
* Update to zcash_proofs with split downloads
* Check file sizes to help debug parameter load failures in zcash_proofs
* Start the second download once the first has finished in zcash_proofs
* Document the parameter download task
* Stop hashing existing files twice
* validate consensus rule: negative fee not allowed
* fix a test TODO
* fix imports
* move import back
* fix panic text
* join consensus rule check code
* match assertion better in tests
* fix test
* fix consensus rule validation
* remove panics
* Delete a TODO
Co-authored-by: teor <teor@riseup.net>
* Create a `LockTime::unlocked` helper constructor
Returns a `LockTime` that is unlocked at the genesis block.
* Return `Option<LockTime>` from `lock_time` method
Prepare to return `None` for when a transaction has its lock time
disabled.
* Return `None` instead of zero `LockTime`
Because a zero lock time means that the transaction was unlocked at the
genesis block, so it was never actually locked.
* Rephrase zero lock time check comment
Clarify that the check is not redundant, and is necessary for the
genesis transaction.
Co-authored-by: teor <teor@riseup.net>
* Add a `transparent::Input::sequence` getter method
Retrieve a transparent input's sequence number.
* Check if lock time is enabled by a sequence number
Validate the consensus rule that the lock time is only enabled if at
least one transparent input has a value different from `u32::MAX` as its
sequence number.
* Add more Zcash specific details to comment
Explain the Zcash specific lock time behaviors.
Co-authored-by: teor <teor@riseup.net>
* Add `time` field to `Request::Block` variant
The block time to use to check if the transaction was unlocked and
allowed to be included in the block.
* Add `Request::block_time` getter
Returns the block time for the block that owns the transaction being
validated or the current time plus a tolerance for mempool transactions.
* Validate transaction lock times
If they are enabled by a transaction's transparent input sequence
numbers, make sure that they are in the past.
* Add comments with consensus rule parts
Make it easier to map what part of the consensus rule each match arm is
responsible for.
Co-authored-by: teor <teor@riseup.net>
* add testnet test blocks around nu5
* validate coinbase expiration height
* change const name and doc
Co-authored-by: teor <teor@riseup.net>
* change commit location
Co-authored-by: teor <teor@riseup.net>
* use pre Nu5 rules when there is no activation height
* add sapling final root to nu5 test vectors
* fix tests
Co-authored-by: teor <teor@riseup.net>
* Implement incremental note commitment Merkle tree for Sprout
* Add tests for Sprout note commitment tree
* Remove the `Arbitrary` attribute
* Reverse the vector of empty roots
* Add more tests
* Refactor rustdoc
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Refactor rustdoc
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* rustdoc
* Rustdoc
* rustdoc links
* Oops, need the trait in scope to use it
* Avoid accessing the wrapped hash directly
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* rustfmt
* Add typing
* Avoid accessing the wrapped hash directly
* Implement incremental note commitment Merkle tree for Sprout
* Add tests for Sprout note commitment tree
* Remove the `Arbitrary` attribute
* Reverse the vector of empty roots
* Add more tests
* Refactor rustdoc
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Refactor rustdoc
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* rustdoc
* Rustdoc
* rustdoc links
* Oops, need the trait in scope to use it
* Avoid accessing the wrapped hash directly
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* rustfmt
* Add typing
* Avoid accessing the wrapped hash directly
* Add Overwinter final roots (test vectors)
* Test sprout note commitments trees on Overwinter blocks
* Add new test vectors
* Finish the tests for the note commitment trees
* Make the wrapped hash in `Root` private
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Deirdre Connolly <durumcrustulum@gmail.com>
* First pass at async Halo2 verification service
Stubs out a batch verifier for the future.
The dependencies for orchard, halo2, librustzcash, zcash_primitives, have
not been resolved.
* Halo2 verifier service and test
* Remove redundant conversion
* Test async halo2 verifier service with pre-computed Orchard shielded data test vectors
* Fix typo
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Assert future result is_ok() in Halo2 verifier test
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Shorten tower::Service trait constraints for Halo2 verifier tests
* Remove commented out trait constraints
* .expect() vs .unwrap() to parse orchard::redpallas::VerificationKey
* Use .to_vec() for some test vectors
* Fix self-referential Display impl
* Fix deps
* Distinguish orchard vs zebra_chain::orchard imports
* Add test that halo2 verifier fails with malformed proof inputs
* Use thiserror for Halo2Error
* Use ZcashFoundation/orchard instead of dconnolly/orchard
* Add a link to the issue to remove the zfnd fork of orchard crate
* Update zebra-consensus/Cargo.toml
Co-authored-by: teor <teor@riseup.net>
* Add note
* Move artificial Orchard shielded data test vectors to zebra-test
* Align brackets
* Tidy some trait constraints and debug statements
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
* Upgrade aes and fpe
* Upgrade bellman, bls12_381, jubjub to latest
* Upgrade x25519-dalek to 1.2.0 and curve25519-dalek to 3.2.0 in the Cargo.lock
* Skip outdated hdrhistogram rather than its dependencies
Co-authored-by: teor <teor@riseup.net>
* Cleanup a function that calls zcash_script
* Remove zebra_test::prelude macros that conflict with the Rust prelude
* Add sigops count support to zebra-script
* Check MAX_BLOCK_SIGOPS in the block verifier
* Test MAX_BLOCK_SIGOPS on generated and historic blocks
* Add SAFETY comments for all unsafe zebra-script code
* Explain where the consensus rule comes from
* Remove unused pretty_assertions dependency
* Allow large test block generation functions with the proptest-impl feature
* Replace `as` with `try_into` for integer conversions in unsafe code
* Expand SAFETY comments
* Revert "Remove commented-out code"
This reverts commit 9e69777925f103ee11e5940bba95b896c828839b.
* Implement deserialization for `addrv2` messages
* Limit addr and addrv2 messages to MAX_ADDRS_IN_MESSAGE
* Clarify address version comments
* Minor cleanups and fixes
* Add preallocation tests for AddrV2
* Add serialization tests for AddrV2
* Use prop_assert in AddrV2 proptests
* Use a generic utility method for deserializing IP addresses in `addrv2`
* Document the purpose of a conversion to MetaAddr
* Fix a comment typo, and clarify that comment
* Clarify the unsupported AddrV2 network ID error and enum variant names
```sh
fastmod AddrV2UnimplementedError UnsupportedAddrV2NetworkIdError zebra-network
fastmod Unimplemented Unsupported zebra-network
```
* Fix and clarify unsupported AddrV2 comments
* Replace `panic!` with `unreachable!`
* Clarify a comment about skipping a length check in a test
* Remove a redundant test
* Basic addr (v1) and addrv2 deserialization tests
* Test deserialized IPv4 and IPv6 values in addr messages
* Remove redundant io::Cursor
* Add comments with expected values of address test vectors
* Add a `Duration32::from_days` constructor
Make it simpler to construct a `Duration32` representing a certain
number of days.
* Add `MetaAddr::was_not_recently_seen` method
A helper method to check if a peer was never seen before or if it was
last seen a long time ago. This will be one of the conditions to
consider a peer as unreachable.
* Add `MetaAddr::is_probably_unreachable` method
A helper method to check if a peer should be considered unreachable. It
is considered unreachable if recent connection attempts have failed and
it was not recently seen.
If a peer is considered unreachable, Zebra shouldn't attempt to connect
to it again.
* Do not keep trying to connect to unreachable peer
A peer is probably unreachable if it was last seen a long time ago and
if it's last connection attempt failed.
* Test `was_not_recently_seen`
Redo the calculation on arbitrary `MetaAddr`s.
* Test `is_probably_unreachable`
Redo the calculation on arbitrary `MetaAddr`s.
* Test if probably unreachable peers are ignored
Given an `AddressBook` with a list of arbitrary `MetaAddr`s, check that
none of the peers listed for a reconnection is probably unreachable.
* Rename unit test to improve clarity
Remove the double negative from the name.
Co-authored-by: teor <teor@riseup.net>
* Rename constant to `MAX_RECENT_PEER_AGE`
Make the purpose of the constant clearer.
Co-authored-by: teor <teor@riseup.net>
* Rename method to `last_seen_is_recent`
Remove the double negative from the name.
* Rename method to `is_probably_reachable`
Avoid having to negate the result of the method in security critical
filter.
* Move check into `is_ready_for_connection_attempt`
Make sure the check is used in any place that requires a peer that's
ready for a connection attempt.
* Improve test documention
Describe the goal of the test better.
Co-authored-by: teor <teor@riseup.net>
* Improve `is_probably_reachable` documentation
List the conditions as bullet points.
Co-authored-by: teor <teor@riseup.net>
* Document what happens when peers have no last seen time
Co-authored-by: teor <teor@riseup.net>
* Implement addr v1 serialization using a separate AddrV1 type
* Remove commented-out code
* Split the address serialization code into modules
* Reorder v1 and in_version fields in serialization order
* Fix a missed search-and-replace
* Explain conversion to MetaAddr
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add CompactSize64 and CompactSizeMessage types
But don't remove read_compactsize and write_compactsize yet.
* Fix CompactSize capitalisation
```sh
fastmod compactSize CompactSize zebra* book
fastmod compactsize CompactSize zebra* book
```
* Make CompactSize patterns consistent with integer lengths
* Replace unwrap_err with asserting is_err
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Replace a panic with an assertion
* Make generic serialization use CompactSizeMessage
* Fix type inference and borrow-checker errors
* Doctest fixes
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* ZIP-401 weighted random mempool eviction
* rename zcash.mempool.total_cost.bytes to zcash.mempool.cost.bytes
Co-authored-by: teor <teor@riseup.net>
* Remove duplicated lines
* Add cost() method to UnminedTx
Update serialization failure messages
* More docs quoting ZIP-401 rules
* Change mempool::Storage::new() to handle Copy-less HashMap, HashSet
* mempool: tidy cost types and evict_one()
* More consensus rule docs
* Refactor calculating mempool costs for Unmined transactions
* Add a note on asympotic performance of calculating weights of txs in mempool
* Bump test mempool / storage config to avoid weighted random cost limits
* Use mempool tx_cost_limit = u64::MAX for some tests
* Remove failing tests for now
* Allow(clippy::field-reassign-with-default) because of a move on a type that doesn't impl Copy
* Fix mistaken doctest formatting
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Increase test timeout for Windows builds
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Limit tx size
Zebra now limits the transaction size in the `zcash_deserialize()` method for
`Transaction`.
* Remove unused error variants (#2941)
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Limit tx size
Zebra now limits the transaction size in the `zcash_deserialize()` method for
`Transaction`.
* Test the tx deserialization limit
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Increment the crates that have new commits since the last version
* Increment the crates that depend on crates that have changed
* Increment the version of `zebra-script`
* Use the `zebrad` version in the `zebra-network` user agent string
* Use the `v1.0.0-alpha.19` git tag in `README.md`
* Copy the draft changelog into `CHANGELOG.md`
* Delete bumps
* Update CHANGELOG.md
Co-authored-by: teor <teor@riseup.net>
* Add newly merged PRs
Co-authored-by: teor <teor@riseup.net>
* Create a new VerifiedUnminedTx containing the miner fee
* Use VerifiedUnminedTx in mempool verification responses
And do a bunch of other cleanups.
* Use VerifiedUnminedTx in mempool download and verifier
* Use VerifiedUnminedTx in mempool storage and verified set
* Impl Display for VerifiedUnminedTx, and some convenience methods
* Use VerifiedUnminedTx in existing tests
* Limit the size of rejection lists when there is a spend conflict
Previously, `insert` would return early with an error,
and skip limiting the rejection list sizes.
* Use prop_assert macros in proptests, rather than assert
* Add `HashSet`s to help spend conflict detection
Keep track of the spent transparent outpoints and the revealed
nullifiers.
Clippy complained that the `ActiveState` had variants with large size
differences, but that was expected, so I disabled that lint on that
`enum`.
* Clear the `HashSet`s when clearing the mempool
Clear them so that they remain consistent with the set of verified
transactions.
* Use `HashSet`s to check for spend conflicts
Store new outputs into its respective `HashSet`, and abort if a
duplicate output is found.
* Remove inserted outputs when aborting
Restore the `HashSet` to its previous state.
* Remove tracked outputs when removing a transaction
Keep the mempool storage in a consistent state when a transaction is
removed.
* Remove tracked outputs when evicting from mempool
Ensure eviction also keeps the tracked outputs consistent with the
verified transactions.
* Refactor to create a `VerifiedSet` helper type
Move the code to handle the output caches into the new type. Also move
the eviction code to make things a little simpler.
* Refactor to have a single `remove` method
Centralize the code that handles the removal of a transaction to avoid
mistakes.
* Move mempool size limiting back to `Storage`
Because the evicted transactions must be added to the rejected list.
* Remove leftover `dbg!` statement
Leftover from some temporary testing code.
Co-authored-by: teor <teor@riseup.net>
* Remove unnecessary `TODO`
It is more speculation than planning, so it doesn't add much value.
Co-authored-by: teor <teor@riseup.net>
* Fix typo in documentation
The verb should match the subject "transactions" which is plural.
Co-authored-by: teor <teor@riseup.net>
* Add a comment to warn about correctness
There's a subtle but important detail in the implementation that should
be made more visible to avoid mistakes in the future.
Co-authored-by: teor <teor@riseup.net>
* Remove outdated comment
Left-over from the attempt to move the eviction into the `VerifiedSet`.
* Improve comment explaining lint removal
Rewrite the comment explaining why the Clippy lint was ignored.
* Check for spend conflicts in `VerifiedSet`
Refactor to avoid API misuse.
* Test rejected transaction rollback
Using two transactions, perform the same test adding a conflict to both
of them to check if the second inserted transaction is properly
rejected. Then remove any conflicts from the second transaction and add
it again. That should work, because if it doesn't it means that when the
second transaction was rejected it left things it shouldn't in the
cache.
* Test removal of multiple transactions
When removing multiple transactions from the mempool storage, all of the
ones requested should be removed and any other transaction should be
still be there afterwards.
* Increase mempool size to 4, so that spend conflict tests work
If the mempool size is smaller than 4,
these tests don't fail on a trivial removal bug.
Because we need a minimum number of transactions in the mempool
to trigger the bug.
Also commit a proptest seed that fails on a trivial removal bug.
(This seed fails if we remove indexes in order,
because every index past the first removes the wrong transaction.)
* Summarise transaction data in proptest error output
* Summarise spend conflict field data in proptest error output
* Summarise multiple removal field data in proptest error output
And replace the very large proptest debug output with the new summary.
Co-authored-by: teor <teor@riseup.net>
* Update versions for zebra v1.0.0-alpha.18 release
* WIP: Initial PR list
* Remove uninteresting version bumps from CHANGELOG
* Categorise and group PRs in CHANGELOG, removing uninteresting PRs
* Further refine and categorise changelog entries
* Fix tag url
* Final changes to CHANGELOG
* Add a changelog description
* Spacing
* Clarify and fix changelog PR descriptions
* Add PRs that are about to be merged
* More slight clarifications
* Spacing
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Check return value of zcash_script_new_precomputed_tx
* Set the NU5 testnet activation height to 1_590_000
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Update Nu5 constants to new values
* Update ZIP-244 test vectors for new branch ID
* Squashed commit of the following:
commit bdb120a249
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:54:01 2021 -0400
Use pallas::Base::from_str_vartime() in sinsemilla tests
commit e99fa49258
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 11:45:24 2021 -0400
Compiles
commit a520018114
Author: Deirdre Connolly <durumcrustulum@gmail.com>
Date: Tue Oct 5 10:15:17 2021 -0400
Incomplete upgrade of deps
* Squashed commit of the following:
commit 8d1b76ec5626517817c3a4d9f3950acc90a359df
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 04:02:26 2021 +0000
Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
commit 371233628ae61e0c25d6ba8f31d9dba42823becb
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:06:20 2021 +0000
Update Zcash dependencies
Update some Zcash crates:
- `halo2`
- `incrementalmerkletree' (patch version)
- `orchard` (patch version)
- `zcash_history` (patch version)
- `zcash_note_encryption` (patch version)
- `zcash_primitives` (patch version)
And also update the `group` dependency so that the code remains
compatible.
commit de5cf1ec40c3fc08670fc971cdf3e65e13d9f4c7
Author: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Date: Tue Oct 5 03:04:13 2021 +0000
Update error message assertion
Use the updated message for the expected error variant.
* Update `zcash_script` to support V5 transactions
Use a newer version of `zcash_script` that has been updated to support
V5 transactions.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
* Rename type parameter to be more explicit
Replace the single letter with a proper name.
* Remove imports for `Request` and `Response`
The type names will conflict with the ones for the mempool service.
* Attach `Mempool` service to the `Crawler`
Add a field to the `Crawler` type to store a way to access the `Mempool`
service.
* Forward crawled transactions to downloader
The crawled transactions are now sent to the transaction downloader and
verifier, to be included in the mempool.
* Derive `Eq` and `PartialEq` for `mempool::Request`
Make it simpler to use the `MockService::expect_request` method.
* Test if crawled transactions are downloaded
Create some dummy crawled transactions, and let the crawler discover
them. Then check if they are forwarded to the mempool to be downloaded
and verified.
* Don't send empty transaction ID list to downloader
Ignore response from peers that don't provide any crawled transactions.
* Log errors when forwarding crawled transaction IDs
Calling the Mempool service should not fail, so if an error happens it
should be visible. However, errors when downloading individual
transactions can happen from time to time, so there's no need for them
to be very visible.
* Document existing `mempool::Crawler` test
Provide some depth as to what the test expect from the crawler's
behavior.
* Refactor to create `setup_crawler` helper function
Make it easier to reuse the common test setup code.
* Simplify code to expect requests
Now that `zebra_network::Request` implement `Eq`, the call can be
simplified into `expect_request`.
* Refactor to create `respond_with_transaction_ids`
A helper function that checks for a network crawl request and responds
with the given list of crawled transaction IDs.
* Refactor to create `crawler_iterator` helper
A function to intercept and respond to the fanned-out requests sent
during a single crawl iteration.
* Refactor to create `respond_to_queue_request`
Reduce the repeated code necessary to intercept and reply to a request
for queuing transactions to be downloaded.
* Add `respond_to_queue_request_with_error` helper
Intercepts a mempool request to queue transactions to be downloaded, and
responds with an error, simulating an internal problem in the mempool
service implementation.
* Derive `Arbitrary` for `NetworkUpgrade`
This is required for deriving `Arbitrary` for some error types.
* Derive `Arbitrary` for `TransactionError`
Allow random transaction errors to be generated for property tests.
* Derive `Arbitrary` for `MempoolError`
Allow random Mempool errors to be generated for property tests.
* Test if errors don't stop the mempool crawler
The crawler should be robust enough to continue operating even if the
mempool service fails to download transactions or even fails to handle
requests to enqueue transactions.
* Reduce the log level for download errors
They should happen regularly, so there's no need to have them with a
high visibility level.
Co-authored-by: teor <teor@riseup.net>
* Stop crawler if service stops
If `Mempool::poll_ready` returns an error, it's because the mempool
service has stopped and can't handle any requests, so the crawler should
stop as well.
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Change assertion condition to match message
Refactor the condition so that the expression is easier to compare to
the panic message.
* Change comparison order to match panic message
Change the order of the equality so that it matches the panic message.
* mempool - support transaction expiration
* use `LatestChainTip` instead of state call
* clippy
* remove spawn task
* remove non needed async from function
* remove return value
* add a `expiry_height_mut()` method to `Transaction` for testing purposes
* fix `remove_expired_transactions()`
* add a `mempool_transaction_expiration()` test
* tidy cleanup to `expiry_height()`
* improve docs
* fix the build
* try fix macos build
* extend tests
* add doc to function
* clippy
* fix build
* start tests at block two
* Add `Transaction::spent_outpoints` getter method
Returns an iterator over the UTXO `OutPoint`s spent by the transaction.
* Add `mempool::Error::Conflict` variant
An error representing that a transaction was rejected because it
conflicts with another transaction that's already in the mempool.
* Reject conflicting mempool transactions
Reject including a transaction in the mempool if it spends outputs
already spent by, or reveals nullifiers already revealed by another
transaction in the mempool.
* Fix typo in documentation
Remove the `r` that was incorrectly added.
Co-authored-by: teor <teor@riseup.net>
* Specify that the conflict is a spend conflict
Make the situation clearer, because there are other types of conflict.
Co-authored-by: teor <teor@riseup.net>
* Clarify that the outpoints are from inputs
Because otherwise it could lead to confusion because it could also mean
the outputs of the transaction represented as `OutPoint` references.
Co-authored-by: teor <teor@riseup.net>
* Create `storage::tests::vectors` module
Refactor to follow the convention used for other tests.
* Add an `AtLeastOne::first_mut` method
A getter to allow changing the first element.
* Add an `AtLeastOne::push` method
Allow appending elements to the collection.
* Derive `Arbitrary` for `FieldNotPresent`
This is just to make the code that generates arbitrary anchors a bit
simpler.
* Test if conflicting transactions are rejected
Generate two transactions (either V4 or V5) and insert a conflicting
spend, which can be either a transparent UTXO, or a nullifier for one of
the shielded pools. Check that any attempt to insert both transactions
causes one to be accepted and the other to be rejected.
* Delete a TODO comment that we decided not to do
Co-authored-by: teor <teor@riseup.net>
* Fix an incorrect assertion when the block locator is at the tip
This might have been triggered by receiving block hash gossips
from the new Zebra code.
* Add missing tests for zebra-state requests and responses
Specifically:
* `BlockLocator` (populated state only)
* `FindBlockHashes`
* `FindBlockHeaders`
* Test `FindBlock*` before and after the current block
* Add a specific test for bug #2789
* Refactor collect_best_chain_hashes to avoid manual index calculations
* Reword a comment
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Use `TipAction::Reset` for initialization and out-of-order blocks
Needs tests for:
- cloning a `ChainTipChange` resets the cloned instance
- skipped updates reset the cloned instance
- changing forks resets the cloned instance
* Use `TipAction::Reset` for network upgrade activation blocks
* Use an `if` expression
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Another if expression
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Rename ChainTipReceiver to CurrentChainTip
`fastmod ChainTipReceiver CurrentChainTip zebra*`
* Update chain tip documentation and variable names
* Basic chain tip change implementation, without resets
Also includes the following name changes:
```
fastmod CurrentChainTip LatestChainTip zebra*
fastmod chain_tip_receiver latest_chain_tip zebra*
```
* Clarify the difference between `LatestChainTip` and `ChainTipChange`
* Store precalculated transactions in an `Arc`
Transaction `Hash`es are 32 bytes,
and the minimun transparent transaction size is 54 bytes.
So a full 2MB block can create 1.1MB of transaction hashes.
We use an `Arc` to avoid repeatedly cloning that much data.
* Remove the unused `Block` from `ChainTipBlock`
This drops the block as soon as it isn't needed any more.
Previously, it would stick around until every `ChainTipReceiver`
dropped their `ChainTipBlock`, even if they didn't use the `Block`
at all.
* Re-use finalized blocks for chain tip updates
This avoids serializing and deserializing blocks from the finalized state.
* Optimise tip sender equality checks
* Re-use precalculated block hashes and heights for chain tip updates
* Add chain tip mined transaction IDs
* Doc comment typo
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Always prefer the non-finalized tip in ChainTipSender
This significantly simplifies the internal implementation of ChainTipSender.
Also make the methods and types a bit more generic.
* Update ChainTipSender with blocks, not heights
Also fix a bug where queued non-finalized blocks would clear the chain tip.
* Provide a best tip hash in ChainTip receivers
* Skip finalized blocks once the non-finalized state is active
* Add tip hash and NoChainTip tests
* Remove a redundant finalized tip update
* Skip `None` updates to the finalized tip
The finalized and non-finalized tips never update to `None`
once they have added at least one block.
* Stop committing finalized queued blocks if there is an error
Also return the highest committed queued block.
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Rename BestTipHeight so it can be generalised to ChainTipSender
`fastmod BestTipHeight ChainTipSender zebra*`
For senders:
`fastmod best_tip_height chain_tip_sender zebra*`
For receivers:
`fastmod best_tip_height chain_tip_receiver zebra*`
* Rename best_tip_height module to chain_tip
* Wrap the chain tip watch channel in a ChainTipReceiver type
* Create a ChainTip trait to avoid tricky crate dependencies
And add convenience impls for optional and empty chain tips.
* Use the ChainTip trait in zebra-network
* Replace `Option<ChainTip>` with `NoChainTip`
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Add `Arc<Transaction>` conversions for Transaction IDs
* Use UnminedTxId as the transaction verifier response type
* Use UnminedTx in transaction verifier mempool requests
* Refactor is_mempool into a transaction verifier request method
* Order derives in alphabetical order
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* add value balances to non finalized state
* fix 2 tests
* fix remaining constrain issues in tests
* extend value pool test to non finalized
* WIP: fix tests after adding value pools to non-finalized state (#2647)
* Update Chain::eq_internal_state with Chain.value_balance
Also increase the number of cases in its tests,
because they didn't detect this bug.
* Calculate the chain value pool change before `Chain::push`
Code
- store the chain value pool change in `ContextuallyValidBlock`
- convert `PreparedBlock` to `ContextuallyValidBlock` using `with_block_and_spent_utxos`
(rather than `from` or `into`)
- replace `block_utxos` with `new_outputs` in `PreparedBlock`
- replace `block_utxos` with `chain_value_pool_change` in `ContextuallyValidBlock`
Tests
- create test methods for `PreparedBlock` and `ContextuallyValidBlock`
- use `test_with_zero_chain_pool_change` or `test_with_zero_spent_utxos`
to make tests pass
* fix conflicts
* build `set_current_value_pool()` only for tests
* remove redundant cfgs
* change cfg of set_current_value_pool()
* Clarify some chain field documentation
* Fix bugs in the non-finalized chain value pool calculations
1. Only revert the chain value pool balances when the tip is popped.
Don't modify them when the root is finalized.
2. Only update or revert the chain value pool balances once per block.
(Previously, the block changes were multiplied by the number of *transactions*.)
And make corresponding changes to method names and documentation.
* Add extra proptests to try to identify value balance failures
* Simplify some transaction generation code
* Add extra debugging info to value balance errors
* Actually update non-finalized chain value pools in `UpdateWith`
Previously, we were dropping the updated value pools in the `Ok` result.
So the initial (finalized) chain value pool balances were never modified.
* Rename and document value balance add methods
The names and documentation of these methods were confusing.
* Create genesis-based proptests that check chain value pools
* Increase coverage for some test vectors
* Test each chain value balance calculation for blocks 0-10
* Make continuous blockchain test errors easier to debug
* Test the exact transparent pool values for the first few blocks
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Add validation of ZIP-221 and ZIP-244 commitments
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Add auth commitment check in the finalized state
* Reset the verifier when comitting to state fails
* Add explanation comment
* Add test with fake activation heights
* Add generate_valid_commitments flag
* Enable fake activation heights using env var instead of feature
* Also update initial_tip_hash; refactor into progress_from_tip()
* Improve comments
* Add fake activation heights test to CI
* Fix bug that caused commitment trees to not match when generating partial arbitrary chains
* Add ChainHistoryBlockTxAuthCommitmentHash::from_commitments to organize and deduplicate code
* Remove stale comment, improve readability
* Allow overriding with PROPTEST_CASES
* partial_chain_strategy(): don't update note commitment trees when not needed; add comment
Co-authored-by: teor <teor@riseup.net>
* Improve error logging in rejection_restores_internal_state
* Summarise history tree peaks in debug output
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* add value pools to the database
* remove redundant genesis block check
* use update_with_chain_value_pool_change()
* remove constrains
* remove height from the database
* remove calls to chain_value_pool_change
* clippy
* use the "correct" value balances
* bump the database format
* remove everything that is not finalized state
* clippy
* rustfmt
* use all spent utxos
* add new_outputs utxos to all_utxos_spent_by_block
* remove panic
* add finalized state value pool test
* clippy
* clippy 2
* move import
* fix import
* rustfmt
Co-authored-by: teor <teor@riseup.net>
* Rename internal network requests for wide transaction IDs
fastmod TransactionsByHash TransactionsById zebra*
fastmod AdvertiseTransactions AdvertiseTransactionIds zebra*
fastmod MempoolTransactions MempoolTransactionIds zebra*
fastmod TransactionHashes TransactionIds zebra*
* Update network transaction request/response comments
* Rename a transaction hash method for wide transaction IDs
fastmod transaction_hashes transaction_ids zebra-network
* Add UnminedTxId methods and conversions for InventoryHash
* Map WtxIds to unmined transaction network messages
Also, use UnminedTxId and UnminedTx in:
* Zebra's internal request and response format, and
* external Zcash network protocol messages.
* Enable WtxId mempool inventory tracking for peers
* Further clarify transaction IDs
* Use Witnessed rather than Wide for transaction IDs
And rename narrow to legacy when it only applies to v1-v4 transactions.
Otherwise, rename it to mined ID.
* Rename a missed binding
* Remove an incorrectly named binding
Co-authored-by: Janito Vaqueiro Ferreira Filho <janito.vff@gmail.com>
* Make the `AuthDigest` display order match transaction IDs
And derive `Hash`, just like transaction IDs.
Don't derive `serde` for now, because it's not needed.
* Move transaction::Hash test to tests module
* Add a simple AuthDigest display order test
* Add a WtxId type for wide transaction IDs
* Add conversions between transaction IDs and bytes
* Use the WtxId type in external network protocol messages
* Generate chains with valid chain value pool balances
* Move MAX_PARTIAL_CHAIN_BLOCKS to zebra-chain
* Fix generated value overflow based on the maximum number of values
And split it into its own method.
* Split fix_remaining_value into smaller methods
* Remove unused methods
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Refactor HistoryTree into NonEmptyHistoryTree and HistoryTree
* HistoryTree: use Deref instead of AsRef; remove unneeded PartialEq
* ZIP-221: Validate chain history commitments in the non-finalized state (#2301)
* sketch of implementation
* refined implementation; still incomplete
* update librustzcash, change zcash_history to work with it
* simplified code per review; renamed MMR to HistoryTree
* expand HistoryTree implementation
* handle and propagate errors
* simplify check.rs tracing
* add suggested TODO
* add HistoryTree::prune
* fix bug in pruning
* fix compilation of tests; still need to make them pass
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* improvements from code review
* improve check.rs comments and variable names
* fix HistoryTree which should use BTreeMap and not HashMap; fix non_finalized_state prop tests
* fix finalized_state proptest
* fix non_finalized_state tests by setting the correct commitments
* renamed mmr.rs to history_tree.rs
* Add HistoryTree struct
* expand non_finalized_state protest
* fix typo
* Add HistoryTree struct
* Update zebra-chain/src/primitives/zcash_history.rs
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* fix formatting
* Apply suggestions from code review
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* history_tree.rs: fixes from code review
* fixes to work with updated HistoryTree
* Improvements from code review
* Add Debug implementations to allow comparing Chains with proptest_assert_eq
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Apply suggestions from code review
Co-authored-by: teor <teor@riseup.net>
* Improvements from code review
* Restore blocks returned by PreparedChain since other tests broken; adjust tests with history trees
Co-authored-by: teor <teor@riseup.net>
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Make Amount arithmetic more generic
To modify generated amounts, we need some extra operations on `Amount`.
We also need to extend existing operations to both `NonNegative` and
`NegativeAllowed` amounts.
* Add a constrain method for ValueBalance
* Derive Eq for ValueBalance
* impl Neg for ValueBalance
* Make some Amount arithmetic expectations explicit
* Explain why we use i128 for multiplication
And expand the overflow error details.
* Expand Amount::sum error details
* Make amount::Error field order consistent
* Rename an amount::Error variant to Constraint, so it's clearer
* Add specific pool variants to ValueBalanceError
* Update coinbase remaining value consensus rule comment
This consensus rule was updated recently to include coinbase transactions,
but Zebra doesn't check block subsidy or miner fees yet.
* Add test methods for modifying transparent values and shielded value balances
* Temporarily set values and value balances to zero in proptests
In both generated chains and proptests that construct their own transactions.
Using zero values reduces value calculation and value check test coverage.
A future change will use non-zero values, and fix them so the check passes.
* Add extra fields to remaining transaction value errors
* Swap the transparent value balance sign to match shielded value balances
This makes the signs of all the chain value pools consistent.
* Use a NonNegative constraint for transparent values
This fix:
* makes the type signature match the consensus rules
* avoids having to write code to handle negative values
* Allocate total generated transaction input value to outputs
If there isn't enough input value for an output, set it to zero.
Temporarily reduce all generated values to avoid overflow.
(We'll remove this workaround when we calculate chain value balances.)
* Consistently use ValueBalanceError for ValueBalances
* Make the value balance signs match the spec
And rename and document methods so their signs are clearer.
* Convert amount::Errors to specific pool ValueBalanceErrors
* Move some error changes to the next PR
* Add extra info to remaining transaction value errors (#2585)
* Distinguish between overflow and negative remaining transaction value errors
And make some error types cloneable.
* Add methods for updating chain value pools (#2586)
* Move amount::test to amount::tests:vectors
* Make ValueBalance traits more consistent with Amount
- implement Add and Sub variants with Result and Assign
- derive Hash
* Clarify some comments and expects
* Create ValueBalance update methods for blocks and transactions
Co-authored-by: Alfredo Garcia <oxarbitrage@gmail.com>
* Make Amount arithmetic more generic
To modify generated amounts, we need some extra operations on `Amount`.
We also need to extend existing operations to both `NonNegative` and
`NegativeAllowed` amounts.
* Add a constrain method for ValueBalance
* Derive Eq for ValueBalance
* impl Neg for ValueBalance
* Make some Amount arithmetic expectations explicit
* Explain why we use i128 for multiplication
And expand the overflow error details.
* Expand Amount::sum error details
* Make amount::Error field order consistent
* Rename an amount::Error variant to Constraint, so it's clearer
* Add specific pool variants to ValueBalanceError
* add serialization for value balances
* change test names
* change panic messages
* add a deserialization test
* return the errors from `from_bytes()` methods
* add prop test for serialize/deserialize Amount
* Move amount proptests to amount::tests::prop
Co-authored-by: teor <teor@riseup.net>
This improves proptest results in CI and locally.
Proptests should be faster, because they are not discarding 1/16 results.
Failures should be minimised more often, improving failure logs,
and generating proptest seeds locally and in CI.
Co-authored-by: Conrado Gouvea <conrado@zfnd.org>
* Add ZIP-221 history tree to finalized state
* Improve error / panic handling; improve documentation
* Return error again when preparing batch, fix expect messages
* Fix bug when pushing the Heartwood actiation block to the history tree
* Re-increase database version since it was increased in main
Co-authored-by: teor <teor@riseup.net>
* Add 1 to 3 transactions to generated blocks, rather than always 2
This change improves test coverage.
As a side-effect, it reduces the average number of generated
transactions, which should improve performance.
* Add 1 to max_size generated transparent inputs, rather than always max_size
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Return an error if genesis transparent coinbase data is invalid
This error prevents cryptic errors during genesis coinbase deserialization.
And fix and improve documentation.
* Use the fixed Zcash constant for generated genesis coinbase data
This change is required, because genesis transactions do not have a
coinbase height in their coinbase data.
* Add Orchard support to HistoryTree
* Handle network upgrades in HistoryTree
* Add additional methods to save/load HistoryTree
* Apply suggestions from code review
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Clarification of Entry documentation
* Improvements from code review
* Add HistoryTree tests
* Improved test comments and variable names based on feedback from #2458 on similar test
* Update zebra-chain/src/history_tree.rs
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
* Use type aliases for V1 and V2 history trees
Co-authored-by: Deirdre Connolly <deirdre@zfnd.org>
Co-authored-by: teor <teor@riseup.net>
teor
dependabot[bot]
Deirdre Connolly
Arya
Alfredo Garcia
Pili Guerra
Marek
Conrado Gouvea
Janito Vaqueiro Ferreira Filho
Deirdre Connolly
Dimitris Apostolou