zebra/zebra-utils

Zebra Utilities

This crate contains tools for zebra maintainers.

Programs

• zebra-checkpoints
• zebrad-hash-lookup
• zebrad-log-filter
• zcash-rpc-diff

Binaries are easier to use if they are located in your system execution path.

zebra-checkpoints

This command generates a list of zebra checkpoints, and writes them to standard output. Each checkpoint consists of a block height and hash.

Automatic Checkpoint Generation in CI

Zebra's GitHub workflows automatically generate checkpoints after every main branch update. These checkpoints can be copied into the main-checkpoints.txt and test-checkpoints.txt files.

To find the latest checkpoints on the main branch:

1. Find the latest completed CI Docker workflow run on main. Due to GitHub UI issues, some runs will show as waiting, cancelled, or failed, but the checkpoints have still been generated.
2. Go to the Result of generate-checkpoints-mainnet step in the Run generate-checkpoints-mainnet job, in the Generate checkpoints mainnet job
3. Scroll down until you see the list of checkpoints, it should start around line 200
4. Add those checkpoints to the end of zebra-consensus/src/checkpoint/main-checkpoints.txt
5. Repeat steps 2 to 4 for testnet
6. Open a pull request at https://github.com/ZcashFoundation/zebra/pulls

Manual Checkpoint Generation

To create checkpoints, you need a synchronized instance of zebrad or zcashd. zebrad can be queried directly or via an installed zcash-cli RPC client. zcashd must be queried via zcash-cli, which performs the correct RPC authentication.

Checkpoint Generation Setup

Make sure your zebrad or zcashd is listening for RPC requests, and synced to the network tip.

If you are on a Debian system, zcash-cli can be installed as a package.

zebra-checkpoints is a standalone rust binary, you can compile it using:

cargo install --locked --features zebra-checkpoints --git https://github.com/ZcashFoundation/zebra zebra-utils

Checkpoint Generation Commands

You can update the checkpoints using these commands:

zebra-checkpoints --last-checkpoint $(tail -1 zebra-consensus/src/checkpoint/main-checkpoints.txt | cut -d" " -f1) | tee --append zebra-consensus/src/checkpoint/main-checkpoints.txt &
zebra-checkpoints --last-checkpoint $(tail -1 zebra-consensus/src/checkpoint/test-checkpoints.txt | cut -d" " -f1) -- -testnet | tee --append zebra-consensus/src/checkpoint/test-checkpoints.txt &
wait

When updating the lists there is no need to start from the genesis block. The program option --last-checkpoint will let you specify at what block height you want to start. Usually, the maintainers will copy the last height from each list, and start from there.

Other useful options are:

• --transport direct: connect directly to a zebrad instance
• --addr: supply a custom RPC address and port for the node
• -- -testnet: connect the zcash-cli binary to a testnet node instance

You can see all the zebra-checkpoints options using:

target/release/zebra-checkpoints --help

For more details about checkpoint lists, see the zebra-checkpoints README.

Checkpoint Generation for Testnet

To update the testnet checkpoints, zebra-checkpoints needs to connect to a testnet node.

To launch a testnet node, you can either:

• start zebrad with a zebrad.toml with network.network set to Testnet, or
• run zcashd -testnet.

Then use the commands above to renegerate the checkpoints.

Submit new checkpoints as pull request

• If you started from the last checkpoint in the current list, add the checkpoint list to the end of the existing checkpoint file. If you started from genesis, replace the entire file.
• Open a pull request with the updated Mainnet and Testnet lists at: https://github.com/ZcashFoundation/zebra/pulls

zebrad-hash-lookup

Given a block hash the script will get additional information using zcash-cli.

$ echo "00000001f53a5e284393dfecf2a2405f62c07e2503047a28e2d1b6e76b25f863" | zebrad-hash-lookup
high: 3299
time: 2016-11-02T13:24:26Z
hash: 00000001f53a5e284393dfecf2a2405f62c07e2503047a28e2d1b6e76b25f863
prev: 00000001dbbb8b26eb92003086c5bd854e16d9f16e2e5b4fcc007b6b0ae57be3
next: 00000001ff3ac2b4ccb57d9fd2d1187475156489ae22337ca866bbafe62991a2
$

This program is commonly used as part of zebrad-log-filter where hashes will be captured from zebrad output.

zebrad-log-filter

The program is designed to filter the output from the zebra terminal or log file. Each time a hash is seen the script will capture it and get the additional information using zebrad-hash-lookup.

Assuming zebrad, zclash-cli, zebrad-hash-lookup and zebrad-log-filter are in your path the program can used as:

$ zebrad -v start | zebrad-log-filter
...
block::Hash("
high: 2800
time: 2016-11-01T16:17:16Z
hash: 00000001ecd754790237618cb79c4cd302e52571ecda7a80e6113c5e423c0e55
prev: 00000003ed8623d9499f4bf80f8bc410066194bf6813762b31560f9319205bf8
next: 00000001436277884eef900772f0fcec9566becccebaab4713fd665b60fab309
"))) max_checkpoint_height=Height(419581)
...

zcash-rpc-diff

This program compares zebrad and zcashd RPC responses.

Make sure you have zcashd and zebrad installed and synced.

The script:

1. gets the zebrad and zcashd tip height and network
2. sends the RPC request to both of them using zcash-cli
3. compares the responses using diff
4. leaves the full responses in files in a temporary directory, so you can check them in detail
5. if possible, compares different RPC methods for consistency

Assuming zebrad's RPC port is 28232, you should be able to run:

$ zebra-utils/zcash-rpc-diff 28232 getinfo
Checking zebrad network and tip height...
Checking zcashd network and tip height...

Request:
getinfo

Querying zebrad main chain at height 1649797...
Querying zcashd main chain at height 1649797...

Response diff (between zcashd port and port 28232):
--- /run/user/1000/tmp.g9CJecu2Wo/zebrad-main-1649797-getinfo.json      2022-04-29 14:08:46.766240355 +1000
+++ /run/user/1000/tmp.g9CJecu2Wo/zcashd-main-1649797-getinfo.json      2022-04-29 14:08:46.769240315 +1000
@@ -1,4 +1,16 @@
 {
-  "build": "1.0.0-beta.8+54.ge83e93a",
-  "subversion": "/Zebra:1.0.0-beta.8/"
+  "version": 4070050,
+  "build": "v4.7.0-gitian",
+  "subversion": "/MagicBean:4.7.0/",
... more extra zcashd fields ...
 }

Sometimes zcashd will have extra fields (+) or different data (- and +). And sometimes it will have the same data, but in a different order.

The script will warn you if the heights or networks are different, then display the results of querying the mismatched node states.

The script accepts any RPC, with any number of arguments. If a node doesn't implement an RPC, the script will exit with an error.

Configuration

The script uses the configured zcash-cli RPC port, and the zebrad port supplied on the command-line.

It doesn't actually check what kind of node it is talking to, so you can compare two zcashd or zebrad nodes if you want. (Just edit the zcash.conf file used by zcash-cli, or edit the script.)

You can override the binaries the script calls using these environmental variables:

• $ZCASH_CLI
• $DIFF
• $JQ