PentHertz
/
srsLTE
mirror of https://github.com/PentHertz/srsLTE.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
6,366 Commits 3 Branches 23 Tags 67 MiB
Commit Graph

1603 Commits

Author SHA1 Message Date
Francisco Paisana 92221eb780 update of rrc_interface_mac to remove signal from mac to rrc that RA failed in case of handover failure 2020-08-29 20:06:08 +01:00
Francisco Paisana 46e1e101d3 removal of unecessary ho_ra_complete(false) in mac. In case of HO failure, the rrc should let the t304 expire 2020-08-29 20:06:08 +01:00
Francisco Paisana aed9120458 in case of RA problem during handover, the UE cannot trigger RLF. It has to let t304 expire, which will then trigger the reestablishment procedure with the right cause 2020-08-29 20:06:08 +01:00
Francisco Paisana fca1273b3e avoid spurious warnings of trying to start the PRACH when it is already running during handover 2020-08-28 10:14:23 +01:00
Francisco Paisana fddcc3d8ea In the case of Handover, postpone the activation of the CQI and SR config present in the HO command for after the RA proc completion to the target eNB 2020-08-28 10:14:23 +01:00
Andre Puschmann 641a4a5e79 mac_test: fix compilation if PCAP write is enabled 2020-08-27 23:46:28 +02:00
Andre Puschmann 49a7a90698 mac: simplify BSR packing logic 
simplify logic to check whether a BSR fits and, if so, which type.
before the check has been done in two places.

we now also accomodate for the CE subheader size.
 2020-08-27 23:46:28 +02:00
Andre Puschmann 6364a4513c mac_pdu: fix issue when packing CE but no space left in PDU 
we've not checked the return value when adding a new CE, like BSR or PHR,
for a UL MAC PDU. For very small UL grants, this could fail and
we need to remove the subheader again before packing the PDU.

This fixes issue #1649.
 2020-08-27 23:46:28 +02:00
Daniel Willmann 7d0ae71f17 ttcn3_sys_interface: Handle initial cell attenuation 
When new Cells are added they can have an attenuation configured
directly. Honor that setting.
 2020-08-27 19:18:47 +02:00
Francisco Paisana 5242f9422b fix deadlock in handover 2020-08-27 13:43:18 +01:00
Ismael Gomez 72cc4e0ca5 Stop ContentionResolutionTimer on RA error. Updated test 2020-08-27 10:04:42 +02:00
Xavier Arteaga df2c949417 Radio: add individual Rx gain and integrate in srsue 
Fix compilation

Fix compilation

Add missing variable. Wasn't compiling

Radio: revert some changes
 2020-08-27 09:31:05 +02:00
Xavier Arteaga 029f36b449 srsLTE: added efficient integer resampler and srsue/srsenb integration 2020-08-25 16:19:52 +02:00
Xavier Arteaga 1ff74da078 Remove wrong error message 2020-08-25 10:16:04 +02:00
Francisco Paisana 75b204bc52 fix phy ctrl call to cell selection observers 2020-08-24 22:10:32 +01:00
Francisco Paisana 834c0b3929 integrated new observer pattern into phy controller fsm 2020-08-24 22:10:32 +01:00
Francisco Paisana 48dd436d86 integrated observer pattern into rrc phy ctrl fsm 2020-08-24 22:10:32 +01:00
Francisco Paisana 997552ee45 stop t304 when handover is successful 2020-08-24 17:48:50 +01:00
Francisco Paisana 1d8286eb62 always wait for t304 to expire in case of failed handover 2020-08-24 17:48:50 +01:00
Francisco Paisana ccc8ab70ef stop t304 on handover procedure exit 2020-08-24 17:48:50 +01:00
Francisco Paisana db15f43a77 set reestablishment cause correctly on handover failure 2020-08-24 17:48:50 +01:00
Francisco Paisana b1670c005b remove shadowed variables for reestablishment during handover 2020-08-24 17:48:50 +01:00
Xavier Arteaga 0e96ef3df0 Channel emulator takes SNR as input parameter 2020-08-24 10:46:11 +02:00
Andre Puschmann 5e40bfe72c mac_pdu: unpack and print BSR index as well as BSR value in bytes 
before the BSR was extracted but the actual index (between 0 and 63)
was not stored but directly converted into bytes.

for log parsing and debugging it is easier to follow the index
value. this patch therefore adds both values to the log message
and extends the API accordingly.
 2020-08-21 12:03:07 +02:00
Francisco Paisana 8c9e596f89 refactored s1ap handover request interface. cleaned up rrc tenb s1 handover code 2020-08-21 00:05:58 +01:00
Francisco Paisana 7cd4f45d62 fsm refactor. 
- avoid triggering directly a subfsm
- improved metafunctions
- other cleanups
 2020-08-18 16:07:21 +01:00
Francisco Paisana 841b884796 remove extern C flags from common_helper.h 2020-08-18 13:54:23 +01:00
Francisco Paisana 5be5409f62 scaling governor function moved to common header file 2020-08-18 13:54:23 +01:00
Francisco Paisana 087805d222 add warning if scaling governor is not performance mode 2020-08-18 13:54:23 +01:00
Francisco Paisana 8d10aa906e move defer_task to switch case in the rrc 2020-08-17 22:49:40 +01:00
Andre Puschmann 24dfb03b9d rrc: defer manipulations of the RLC/PDCP arrays 
all calls that manipulate the RLC and/or PDCP arrays suffer
from a high deadlock risk if a PHY worker holds the RLC
AM Rx mutex at the same time when the stack wants to carry
out this reconfiguration.

this applies to RRC Reconfigs, but potentially also to RRC Connection
Reestablishment or even RRC Connection Setup, although this should
seldom be the case.

By breaking the call stack between RLC->PDCP->RRC->RCL and
carrying out the reconfig as a single task without holding the
RLC readlock the deadlock should not happen anymore.

This should fix issue #1593
 2020-08-17 22:49:40 +01:00
faluco e5a792d508 - Fix unused variable. 2020-07-31 13:13:15 +02:00
faluco cfd3f51931
Import of srslog into srsepc and srsenb. (#1574) 
* - Import of srslog into srsepc and srsenb.
* - Removed logger_file and logger_stdout files.
 2020-07-30 19:17:23 +02:00
Xavier Arteaga 202ec283ff SRSUE: fix erroneous code in MUX 2020-07-28 09:31:34 +02:00
Xavier Arteaga 4e1e8cea1a SRSUE: MAC HARQ entities vector is fixed 2020-07-28 09:31:34 +02:00
Xavier Arteaga 09af743361 SRSUE: minor PHY modfifications 2020-07-28 09:31:34 +02:00
Xavier Arteaga 0b02f8948c SRSUE: fix shadow variable 2020-07-28 09:31:34 +02:00
Ismael Gomez c02e920b6b Trigger RA after SR failed directly (don't wait for next BSR trigger) 2020-07-27 17:58:06 +02:00
faluco efdff8ba4c
Import srslog into srsue (#1556) 
- Import the srslog project into srslte.
- Ported srsue app to use the new logging framework.
- Implemented a wrapper that dispatches log entries to srslog.
- Renamed an existing log test to be more specific to avoid name clashes.
 2020-07-22 16:04:18 +02:00
Andre Puschmann 1199a79851 fix Scell sync for large cells 
the PSS detection needs more temporary buffer than a full subframe.
we therefore need to allocate and initialize the sync object with
larger maximum size to support Scell search of large cells, e.g.
20 MHz

this fixes issue #1538
 2020-07-21 18:35:53 +02:00
Andre Puschmann ce5129467c correct default value of PHY threads in eNB and UE examples 2020-07-21 11:59:45 +02:00
Andre Puschmann 9550bd3ef8 rlc: revisit interface for MAC and RRC 
* add locked and unlocked version of has_data() since one is
  called from stack and one from PHY threads

* add comments in each interface section as to why locking
  is required or not

* remove RLC rwlock when not required

* move calls only used by RRC to RRC section
 2020-07-21 11:56:43 +02:00
Pedro Alvarez c686e6cea1
SRSUE: Set SCell configuration is unlocking (#1544) 2020-07-20 19:30:25 +02:00
Ismael Gomez 06eba7eb72 Discard cells if not found during cel selection 2020-07-20 15:37:40 +02:00
Andre Puschmann 138ec1f8e7 nas,usim: remove use of shadowed variables 2020-07-20 10:58:10 +02:00
Ismael Gomez 7866f19f6b Use correct target cell when doing reselection in HO 2020-07-17 22:47:59 +02:00
Ismael Gomez 443dee7035
Changes in Cell Selection Procedure (#1557) 
* Fixes RRC cell reselection procedure
 2020-07-17 17:05:19 +02:00
Xavier Arteaga 0192130742 SRSUE/SRSENB: UCI bits are carrier by the lowest serving cell index 
SRSENB: Fix UCI in lowest serving cell index PUSCH transmission
 2020-07-15 07:34:14 +02:00
Andre Puschmann 4fd5395903 change default EARFCN to 3350 or 2.68GHz 
as 3400 or 2.685 GHz is on the edge of band 7, some phones won't connect
to a 20 MHz cell on this EARFCN.

In order to simplify testing with other bandwidths we change the default EARFCN.
 2020-07-14 17:25:08 +02:00
Francisco Paisana 4fb8011a6d updated phy controller to use task scheduler 2020-07-14 13:33:50 +01:00
Francisco Paisana 36fc88d2e2 fsm log macros, and utility methods to convert event callbacks to move tasks 2020-07-14 13:33:50 +01:00
Francisco Paisana 9c5471b094 more ergonomic event callback 2020-07-14 13:33:50 +01:00
Francisco Paisana 58a9610efa use of stack event loop to propagate cell search and selection results 2020-07-14 13:33:50 +01:00
Francisco Paisana d48a45976e moved cell selection/search complete event signalling out of phy_controller 2020-07-14 13:33:50 +01:00
Francisco Paisana 48138b5281 removal of phy cell selection procedure as it now it is replaced by phy controller 2020-07-14 13:33:50 +01:00
Francisco Paisana 489969722e implemented phy controller FSM to perform cell selection & search. The controller also tracks the phy sync state 2020-07-14 13:33:50 +01:00
Andre Puschmann a7911f0dab pdcp,rlc: refactor SDU queueing policy 
this patch refactors the SDU queuing and dropping policy of the RLC and PDCP layer.
the previous design had issues when packets have been generated at a higher
rate above the PDCP than they could be consumed below the RLC.

When the RLC SDU queues were full, we allowed two policies, one to block on the write
and the other to drop the SDU. Both options are not ideal because they either
lead to a blocking stack thread or to lost PDCP PDUs.

To avoid this, this patch makes the following changes:

* PDCP monitors RLC's SDU queue and drops packets on its north-bound SAP if queues are full
  * a new method sdu_queue_is_full() has been added to the RLC interface for PDCP
* remove blocking write from pdcp and rlc write_sdu() interface
  * all writes into queues need to be non-blocking
  * if Tx queues are overflowing, SDUs are dropped above PDCP, not RLC
* log warning if RLC still needs to drop SDUs
  * this case should be avoided with the monitoring mechanism
 2020-07-13 17:05:28 +02:00
Francisco Paisana 5e06430455 removal of stack handler interface 2020-07-13 11:19:25 +01:00
Francisco Paisana 7c364070ee creation of task scheduler interface for classes/functions running outside the main control thread 2020-07-13 11:19:25 +01:00
Francisco Paisana 039977aeb5 renamed interfaces 2020-07-13 11:19:25 +01:00
Francisco Paisana 1a9c04bf2f use of task scheduler handle in pdcp 2020-07-13 11:19:25 +01:00
Francisco Paisana 4f5e65781f created task scheduler class to deal with timers, thread pool, multiqueue, internal tasks 2020-07-13 11:19:25 +01:00
Pedro Alvarez 528777fa29 Added sleep to avoid nas test concurrency issue. 2020-07-09 13:58:51 +01:00
Francisco Paisana 8c920837d6 fix issue when adding neighbour cell that matches serving cell 2020-07-08 00:19:18 +01:00
Francisco Paisana 43db9b81fb fix function ptr issue 2020-07-08 00:19:18 +01:00
Francisco Paisana d746115130 moved serving cell to meas_cell_list 2020-07-08 00:19:18 +01:00
Francisco Paisana 928459408e fix cell meas sorting issue 2020-07-08 00:19:18 +01:00
Francisco Paisana d2dd30c8cb rrc_meas_test failing 2020-07-08 00:19:18 +01:00
Francisco Paisana 9a1f69113f created class for managing neighbor cells of rrc 2020-07-08 00:19:18 +01:00
Francisco Paisana 069dc1f751 moved cell struct of srsue::rrc to separate file 2020-07-08 00:19:18 +01:00
Andre Puschmann 1e4eae7395 nas: log estimated count instead of local rx_count when logging integrity check result 2020-07-05 16:56:06 +02:00
Andre Puschmann bd0c13aad0 ue_stack: bump priority of stack thread 
the stack thread should really run with the next highest priority after
sync + phy workers to make sure it gets enough CPU
 2020-07-05 16:56:06 +02:00
Francisco Paisana 08f9801c76 remove requirement for rrc to be idle and nas attached to run reselection 2020-07-03 18:35:53 +01:00
Francisco Paisana d12b037e0d make cell reselection periodic and with period of 20msec 2020-07-03 18:35:53 +01:00
Francisco Paisana 510687766f added comments in rrc cell select test 2020-07-03 14:00:14 +01:00
Francisco Paisana c6f422d23e improved cell selection test in srsue::rrc 2020-07-03 14:00:14 +01:00
Francisco Paisana 3b1f2719dd return error from cell selection if unable to select serving cell 2020-07-03 10:26:49 +01:00
Francisco Paisana 3e016b8095 select serving cell during cell selection if it is stronger than neighbors 2020-07-03 10:26:49 +01:00
Andre Puschmann 218fa5cf55 ttcn3_dut: fix bug in DUT 
reducing the sync queue len to 1 caused an issue when the
PHY was locking the mutex while trying to push a TTI event
on the stack.

instead of signaling the new TTI within the PHY, we now do it outside
in the DUT (after releasing the PHY mutex)
 2020-07-02 17:39:43 +02:00
Francisco Paisana 84f34bc736 changed to a label filtering approach for ctest 2020-07-02 15:56:59 +01:00
Francisco Paisana ebb8f18000 set some extra tests with the prefix "long_" 2020-07-02 15:56:59 +01:00
Francisco Paisana c6323478d2 remove unecessary sleeps in mac test, and add long_ prefix in long tests 2020-07-02 15:56:59 +01:00
Pedro Alvarez 772ab89391 srsUE: Fix for NAS overflow counter computation. 2020-07-02 14:52:21 +01:00
Ismael Gomez 0382933cb1 Select serving cell if PHY not in sync 2020-07-02 12:01:06 +02:00
Ismael Gomez e378a45db0 Reorganized priorities to avoid GW starve the CPU 2020-07-02 11:52:14 +02:00
Francisco Paisana d7a0fe4060 improve log messages for CA 2020-07-01 11:54:06 +01:00
Andre Puschmann a5c0f96fa7 srsue: limit sync queue length to 1 for ZMQ radio 
apply same change that we've done on the eNB also on the UE
to avoid the PHY processing TTIs faster than the stack.

Without that, we see lots of those in the logs:

...
08:39:17.580325 [STCK] [W] Detected slow task processing (sync_queue_len=7).
...
 2020-06-30 10:36:01 +02:00
Andre Puschmann c15b2ec810 ttcn3_dut: always create timer when enabling TESTMODE B 
create timer but dont yet set it. this avoid adding multiple
checks if the timer var is actually initialized.
 2020-06-30 10:31:52 +02:00
Andre Puschmann cf12c98630 srsue: exit early if radio can't be initialized 
since the radio is the first component we initialize, it is safe to
exit the ue::init() straight away, as no other layers use any handles yet
 2020-06-30 09:30:31 +02:00
Andre Puschmann d16897c09a scell_sync: fix missing dtor freeing sync object 2020-06-30 09:30:31 +02:00
Andre Puschmann e981d5ee70 rrc,ue: refactor wait conditions before transition to RRC idle 
before entering RRC idle, after receiving a RRC connection release for example,
we need to wait until the RLC for SRB1 or SRB2 have been flushed, i.e.
the RLC has acknowledged the reception of the message.

Previously we have only waited for SRB1 but the message can also be received on SRB2
and in this case both bearers need to be checked.

The method is now streamlined to check both SRBs and is also used when
checking the msg transmission of an detach request.
 2020-06-29 21:19:42 +02:00
Andre Puschmann 63f1ea1bec ttcn3: streamline DRB and SRB Tx interface 
use the same tx interface with const uint8_t* and length byte instead of std::string
 2020-06-29 13:45:42 +02:00
Daniel Willmann 7a25d1d300 Send the RRC_PDU_IND as JSON 
Fixes: srslte_ttcn3#13, srslte_ttcn3#15
 2020-06-29 13:45:42 +02:00
Xavier Arteaga f8cc2d176d Fix typo 2020-06-25 17:42:56 +02:00
Xavier Arteaga 2f0c38fc70 SRSUE: avoid deadlock while configuring cell from stack 2020-06-25 17:42:56 +02:00
Francisco Paisana a0606669e2 fix ue nr gw initialization 2020-06-24 23:28:53 +01:00
Francisco Paisana fddcbc9879 fix vnf-ue stack interface 2020-06-24 23:28:53 +01:00
Andre Puschmann 2c5e159420 ttcn3_drb_interface: remove use of GetArray() 
unfortunately, the rapidjson version shipped with Ubuntu 16.04
doesn't support the GetArray() API so we need to use
normal iterator to loop over the array
 2020-06-23 12:12:58 +02:00
Andre Puschmann bf6ddbe976 ttcn3_drb_interface: use uint8_t and len as tx interface 2020-06-23 12:12:58 +02:00
Andre Puschmann 7f47edf67f fix issue where PDCP SDU was not going through UE stack to SS 
this cause the PDCP echo reply not to appear in MAC/PCAP
 2020-06-23 12:12:58 +02:00