104 lines
4.8 KiB
Markdown
104 lines
4.8 KiB
Markdown
# BMBurner
|
|
BMBurner is a Arduino based EPROM Programmer that can Read/Write/Verify Chips (27C256, SST 27SF512, W27E512, etc...)
|
|
|
|
# [BUY BMBurner][]
|
|
|
|
# Downloads Links :
|
|
- [Windows Tool (BMBurner.exe)][] to Read/Write/Verify Chips
|
|
- [Firmware Updating Tool][] to Update the BMBurner Firmware
|
|
|
|
# Downloads Drivers Links :
|
|
- Driver for FTDI Chipset (BMBurner V1.1, V2.4 and Up, and Moates devices) : [FTDI Driver][]
|
|
- Driver for CH340 Chipset (BMBurner V1.0, BMBurner V2.X) : [CH340 Driver][]
|
|
|
|
# How to Update the BMBurner Firmware (V2.X ONLY):
|
|
- Download and Install the [Firmware Updating Tool][] if not already done
|
|
1. Open the [Firmware Updating Tool][]
|
|
2. Select the COM Port of your BMBurner (and the baudrate, default is 921600)
|
|
3. Clic on 'Connect Device' button to connect to your BMBurner
|
|
4. Clic on the 'Update Firmware' button!
|
|
|
|
**If you have a BMBurner v2.5 or above, you must 'jump' the jumper nearby the Power Switch with a paperclip (by exemple) and at the same time than you are clicking on the 'Update Firmware' button otherwise the firmware won't install in the BMBurner**
|
|
|
|
# Compatible Chips List (for BMBurner V2.X):
|
|
- 27C256 (Read-Only)
|
|
- 27C512 (Read-Only)
|
|
- 27SF256 (can only be burn with v2.4 and Up)
|
|
- 27SF512
|
|
- 27SF512 (Fake with 70ns access/write time)
|
|
- 29C256
|
|
- W27C512 (can only be burn with v2.0 and Up)
|
|
- W27E512 (can only be burn with v2.0 and Up)
|
|
- DS1230
|
|
- 61256/61C256
|
|
- 62256/62C256
|
|
|
|
# BMBurner Windows Tool Functions :
|
|
|
|
*** Image may differ from the updated tool ***
|
|
|
|
![alt tag](https://github.com/bouletmarc/BMBurner/blob/master/Wiring/Arduino_Windows_GUI.png)
|
|
|
|
- Load File to Buffer
|
|
- Save Buffer to File
|
|
- Read Chip
|
|
- Program Chip
|
|
- Verify Chip
|
|
- Blank Check
|
|
- Erase Chip
|
|
- Edit Reading/Writing Chip addressing
|
|
- Edit Reading/Writing Buffer addressing
|
|
- Much Mores...
|
|
|
|
# Serial Protocol Functions (for developpers) :
|
|
|
|
| Command | Receice Buffer | Description
|
|
| --- | --- | --- |
|
|
| 'C'+R+'S'+'MSB'+'LSB'+'CS'| "B1"+"B2"+"...BX"+"CS" | Reads 'S' bytes(S=Size, S=0 for 256bytes) from the EEPROM at address 'MSB'+'LSB' (C=Chip, C=2 for 27C256, C=5 for 27SF512 SST) |
|
|
| 'C'+W+'S'+'MSB'+'LSB'+'B1'+'B2'+'...BX'+'CS'|"O"(0x4F) | Writes 'S' bytes(S=Size, S=0 for 256bytes) from the EEPROM at address 'MSB'+'LSB' (C=Chip, C=2 for 27C256, C=5 for 27SF512 SST) |
|
|
| 5+E+'CS' | "O"(0x4F) | Erase all the data on Chip Type 5 (SST) |
|
|
| 6+E+'CS' | "O"(0x4F) | Erase all the data on Chip Type 6 (SST 256) |
|
|
| V+'CS' (V+V) | "B1"+"B2" + "B3" | Prints the version bytes of the BMBurner PCB Board for Moates Compatibility(Ex:V5.1.0) |
|
|
| F+'CS' (F+F) | "B1"+"B2" | Prints the firmware bytes of the BMBurner PCB Board(Ex:V2.0) |
|
|
| G+'CS' (G+G) | "B1"+"B2" | Prints the BMBurner Starting baudrate (Ex:'B1=1,baud 921.6k', 'B1=2,baud 9600', 'B1=3,baud 115200') |
|
|
| S+0+S | "O"(0x4F) | Switch the internal baudrate on the BMBurner to 921600 for Moates Compatibility |
|
|
| S+7+S | "O"(0x4F) | Switch the internal baudrate on the BMBurner to 115600 for Moates Compatibility |
|
|
| A+'N' | "O"(0x4F) | Change the chip AccessTime to 'N'ns (Ex:N=70 for 70ns AccessTime) |
|
|
|
|
| Command | Descriptor
|
|
| --- | --- |
|
|
| 'N' | 'N' equal the AccessTime in ns (Ex:N=70 for 70ns AccessTime) |
|
|
| 'MSB' | 'MSB' equal to the Most Signifiant Byte for the EEPROM Address location |
|
|
| 'LSB' | 'LSB' equal to the Least Signifiant Byte for the EEPROM Address location |
|
|
| 'C' | 'C' equel the Chip Type (C=2 for 27C256, C=5 for 27SF512 SST, C=6 for 27SF256 SST, etc..) |
|
|
| 'S' | 'S' equal the Size/Amount of bytes to proceed (S=0 is for 256bytes else S equal the amount of byte, S=1 for 1byte) |
|
|
| 'CS' | 'CS' equal to the checksum of the Commands we are sending in 1Byte form |
|
|
| ... | Any Command that isn't within 'Brackets' are the actual Char/String to send (ex: V is for sending the Char V |
|
|
|
|
# Donations :
|
|
|
|
You can donate to me using [This Link][].
|
|
|
|
# Pictures BMBurner V2.3 :
|
|
|
|
![alt tag](https://raw.githubusercontent.com/bouletmarc/BMBurner/master/Wiring/BMBurner_V2.3_Top.jpg)
|
|
|
|
# Pictures BMBurner V1.1 :
|
|
|
|
![alt tag](https://raw.githubusercontent.com/bouletmarc/BMBurner/master/Wiring/BMBurner%20V1.1_LOTS.JPG)
|
|
|
|
# Pictures BMBurner V1.0 :
|
|
|
|
![alt tag](https://raw.githubusercontent.com/bouletmarc/BMBurner/master/Wiring/BMBurner%20V1.0_LOTS.JPG)
|
|
|
|
[This Link]: <https://www.paypal.me/bouletmarc>
|
|
[Project Files]: <https://github.com/bouletmarc/BMBurner/archive/master.zip>
|
|
[Windows Tool (BMBurner.exe)]: <https://github.com/bouletmarc/BMBurner/raw/master/BMBurner.exe>
|
|
[Arduino Software]: <https://www.arduino.cc/en/main/software>
|
|
[CH340 Driver]: <https://sparks.gogo.co.nz/assets/_site_/downloads/CH34x_Install_Windows_v3_4.zip>
|
|
[FTDI Driver]: <http://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip>
|
|
[MiniCore]: <https://github.com/MCUdude/MiniCore>
|
|
[BUY BMBurner]: <https://bmdevs.fwscheckout.com/>
|
|
[Firmware Updating Tool]:<https://github.com/bouletmarc/BMDevsFirmwareUpdater>
|
|
|